qcacld-3.0: components: cmn_services: Fix misspellings

Fix misspellings in components/cmn_services/...

Change-Id: I9ba9e4ea7a193db8b686adf7f31d141bdeea64bf
CRs-Fixed: 3303649

components/cmn_services/logging/inc/wlan_connectivity_logging.h

@@ -453,7 +453,7 @@ struct wlan_diag_packet_info {
  * Table 12-10—Integrity and key wrap algorithms.
  * @grp_cipher: Group cipher suite value as defined in
  * Table 12-10—Integrity and key wrap algorithm in IEEE 802.11 2020.
- * grp_mgmt: Group manangement cipher suite as defined in
+ * grp_mgmt: Group management cipher suite as defined in
  * Table 12-10—Integrity and key wrap algorithms in IEEE 802.11 2020.
  */
 struct wlan_diag_connect {
@@ -638,7 +638,7 @@ struct wlan_packet_info {
  * Table 12-10—Integrity and key wrap algorithms.
  * @group: Group cipher suite value as defined in
  * Table 12-10—Integrity and key wrap algorithms.
- * @group_mgmt: Group manangement cipher suite as defined in
+ * @group_mgmt: Group management cipher suite as defined in
  * Table 12-10—Integrity and key wrap algorithms.
  * @auth_type: Authentication algorithm number field as defined in
  * IEEE 802.11 - 2020 standard section 9.4.1.1
@@ -667,7 +667,7 @@ struct wlan_connect_info {
 #define MAX_RECORD_IN_SINGLE_EVT 5
 
 /**
- * struct wlan_log_record  - Structure for indvidual records in the ring
+ * struct wlan_log_record  - Structure for individual records in the ring
  * buffer
  * @timestamp_us: Timestamp(time of the day) in microseconds
  * @fw_timestamp_us: timestamp at which roam scan was triggered

components/cmn_services/policy_mgr/inc/cfg_policy_mgr.h

@@ -38,7 +38,7 @@
  * If gWlainMccToSccSwitchMode = 5: Force switch without SAP restart.MCC allowed
  *					in exceptional cases.
  * If gWlainMccToSccSwitchMode = 6: Force Switch without SAP restart only in
-					user preffered band.
+					user preferred band.
  * Related: None.
  *
  * Supported Feature: Concurrency

components/cmn_services/policy_mgr/inc/wlan_policy_mgr_api.h

@@ -331,7 +331,7 @@ uint32_t policy_mgr_get_connected_vdev_band_mask(struct wlan_objmgr_vdev *vdev);
 
 /**
  * policy_mgr_get_dfs_master_dynamic_enabled() - support dfs master or not
- * on AP interafce when STA+SAP(GO) concurrency
+ * on AP interface when STA+SAP(GO) concurrency
  * @psoc: pointer to psoc
  * @vdev_id: sap vdev id
  *
@@ -681,7 +681,7 @@ static inline void policy_mgr_check_concurrent_intf_and_restart_sap(
  * @vdev_id: vdev id
  * @mac_id: mac id
  *
- * This function is used to get the conncurrent vdev on same mac
+ * This function is used to get the concurrent vdev on same mac
  *
  * Return: vdev id of the concurrent interface running on same mac
  *
@@ -1452,9 +1452,9 @@ policy_mgr_current_connections_update(struct wlan_objmgr_psoc *psoc,
 /**
  * policy_mgr_change_hw_mode_sta_connect() - Change HW mode for STA connect
  * @psoc: psoc object
- * @scan_list: candidates for conenction
+ * @scan_list: candidates for connection
  * @vdev_id: vdev id for STA/CLI
- * @connect_id: connect id of the conenct request
+ * @connect_id: connect id of the connect request
  *
  * When a new connection is about to come up, change hw mode for STA/CLI
  * based upon the scan results and hw type.
@@ -2171,7 +2171,7 @@ QDF_STATUS policy_mgr_restart_opportunistic_timer(
  * @psoc: PSOC object information
  * @pcl_list_org: Pointer to the preferred channel freq list to be trimmed
  * @weight_list_org: Pointer to the weights of the preferred channel list
- * @pcl_len_org: Pointer to the length of the preferred chanel list
+ * @pcl_len_org: Pointer to the length of the preferred channel list
  *
  * Modifies the preferred channel list of SAP based on the mandatory channel
  *
@@ -2592,7 +2592,7 @@ QDF_STATUS policy_mgr_check_conn_with_mode_and_vdev_id(
  * @new_hw_mode_index: New HW mode index
  * @num_vdev_mac_entries: Number of vdev-mac id mapping that follows
  * @vdev_mac_map: vdev-mac id map. This memory will be freed by the caller.
- * @num_mac_freq: Number of pdev freq maping that follows
+ * @num_mac_freq: Number of pdev freq mapping that follows
  * @mac_freq_range: mac_freq_range mapping
  * So, make local copy if needed.
  *
@@ -3931,7 +3931,7 @@ bool policy_mgr_sta_sap_scc_on_lte_coex_chan(
 /**
  * policy_mgr_valid_channel_for_channel_switch() - check for valid channel for
  * channel switch.
- * @psoc: poniter to psoc
+ * @psoc: pointer to psoc
  * @ch_freq: channel frequency to be validated.
  * This function validates whether the given channel is valid for channel
  * switch.
@@ -3955,7 +3955,7 @@ qdf_freq_t policy_mgr_get_user_config_sap_freq(struct wlan_objmgr_psoc *psoc,
 /**
  * policy_mgr_nan_sap_post_enable_conc_check() - Do concurrency operations
  *                                               post nan/sap enable
- * @psoc: poniter to psoc
+ * @psoc: pointer to psoc
  *
  * Return: void
  **/
@@ -3964,7 +3964,7 @@ void policy_mgr_nan_sap_post_enable_conc_check(struct wlan_objmgr_psoc *psoc);
 /**
  * policy_mgr_nan_sap_post_disable_conc_check() - Do concurrency related
  *                                                operation post nan/sap disable
- * @psoc: poniter to psoc
+ * @psoc: pointer to psoc
  *
  * Return: void
  **/
@@ -3991,7 +3991,7 @@ bool policy_mgr_is_sap_restart_required_after_sta_disconnect(
 /**
  * policy_mgr_is_sta_sap_scc() - check whether SAP is doing SCC with
  * STA
- * @psoc: poniter to psoc
+ * @psoc: pointer to psoc
  * @sap_ch_freq: operating channel frequency of SAP interface
  * This function checks whether SAP is doing SCC with STA
  *
@@ -4003,7 +4003,7 @@ bool policy_mgr_is_sta_sap_scc(struct wlan_objmgr_psoc *psoc,
 /**
  * policy_mgr_nan_sap_scc_on_unsafe_ch_chk() - check whether SAP is doing SCC
  *                                             with NAN
- * @psoc: poniter to psoc
+ * @psoc: pointer to psoc
  * @sap_freq: operating channel frequency of SAP interface
  *
  * Return: true or false
@@ -4338,7 +4338,7 @@ bool policy_mgr_is_mlo_sta_present(struct wlan_objmgr_psoc *psoc);
  * links on 5/6 ghz band)
  * @psoc: PSOC object information
  * @mode: mlo mode to check
- * @mlo_vdev_lst: Pointer to mlo vdev list, this function wil fill this with
+ * @mlo_vdev_lst: Pointer to mlo vdev list, this function will fill this with
  *                list of mlo vdev
  * @num_mlo: Pointer to number of mlo link, this function will fill this with
  *           number of mlo links
@@ -4353,7 +4353,7 @@ bool policy_mgr_is_mlo_in_mode_sbs(struct wlan_objmgr_psoc *psoc,
  * policy_mgr_is_mlo_in_mode_dbs() - Check whether MLO present is DBS
  * @psoc: PSOC object information
  * @mode: mlo mode to check
- * @mlo_vdev_lst: Pointer to mlo vdev list, this function wil fill this with
+ * @mlo_vdev_lst: Pointer to mlo vdev list, this function will fill this with
  *                list of mlo vdev
  * @num_mlo: Pointer to number of mlo link, this function will fill this with
  *           number of mlo links
@@ -4368,7 +4368,7 @@ bool policy_mgr_is_mlo_in_mode_dbs(struct wlan_objmgr_psoc *psoc,
 /**
  * policy_mgr_is_mlo_in_mode_emlsr() - Check whether current connection is eMLSR
  * @psoc: PSOC object information
- * @mlo_vdev_lst: Pointer to mlo vdev list, this function wil fill this with
+ * @mlo_vdev_lst: Pointer to mlo vdev list, this function will fill this with
  *                list of mlo vdev
  * @num_mlo: Pointer to number of mlo link, this function will fill this with
  *           number of mlo links

components/cmn_services/policy_mgr/inc/wlan_policy_mgr_public_struct.h

@@ -94,7 +94,7 @@ typedef int (*send_mode_change_event_cb)(void);
  * @CSA_REASON_CHAN_DISABLED: channel is disabled
  * @CSA_REASON_CHAN_PASSIVE: channel is passive
  * @CSA_REASON_GO_BSS_STARED: P2P go started
- * @CSA_REASON_SAP_ACS: 2.4 GHz perferred SAP ACS starting
+ * @CSA_REASON_SAP_ACS: 2.4 GHz preferred SAP ACS starting
  * @CSA_REASON_SAP_FIX_CH_CONC_WITH_GO: SAP fix channel start
  *  and move GO to other band
  */

components/cmn_services/policy_mgr/src/wlan_policy_mgr_action.c

@@ -1332,7 +1332,7 @@ QDF_STATUS policy_mgr_next_actions(
 	case PM_DOWNGRADE:
 		/*
 		 * check if we have a beaconing entity that advertised 2x2
-		 * intially. If yes, update the beacon template & notify FW.
+		 * initially. If yes, update the beacon template & notify FW.
 		 */
 		status = policy_mgr_nss_update(psoc, POLICY_MGR_RX_NSS_1,
 					PM_NOP, POLICY_MGR_ANY, reason,
@@ -1341,7 +1341,7 @@ QDF_STATUS policy_mgr_next_actions(
 	case PM_UPGRADE:
 		/*
 		 * check if we have a beaconing entity that advertised 2x2
-		 * intially. If yes, update the beacon template & notify FW.
+		 * initially. If yes, update the beacon template & notify FW.
 		 */
 		status = policy_mgr_nss_update(psoc, POLICY_MGR_RX_NSS_2,
 					PM_NOP, POLICY_MGR_ANY, reason,

components/cmn_services/policy_mgr/src/wlan_policy_mgr_core.c

@@ -667,7 +667,7 @@ void policy_mgr_update_conc_list(struct wlan_objmgr_psoc *psoc,
  * policy_mgr_store_and_del_conn_info() - Store and del a connection info
  * @mode: Mode whose entry has to be deleted
  * @all_matching_cxn_to_del: All the specified mode entries should be deleted
- * @info: Struture array pointer where the connection info will be saved
+ * @info: Structure array pointer where the connection info will be saved
  * @num_cxn_del: Number of connection which are going to be deleted
  *
  * Saves the connection info corresponding to the provided mode
@@ -1413,7 +1413,7 @@ policy_mgr_dump_dual_mac_concurrency(struct policy_mgr_psoc_priv_obj *pm_ctx,
 	}
 
 	for (i = 0; i < MAX_NUMBER_OF_CONC_CONNECTIONS; i++) {
-		/* in_use flag is required to be checked becuse vdev bit
+		/* in_use flag is required to be checked because vdev bit
 		 * mask will be 0 for 4th bit if only 3 port concurrency is
 		 * present on a hardware that can support 4 port concurrency
 		 */
@@ -3180,7 +3180,7 @@ QDF_STATUS policy_mgr_get_channel_list(struct wlan_objmgr_psoc *psoc,
 
 			channel_list_5[chan_index_5++] = channel_list[i];
 		} else if (wlan_reg_is_6ghz_chan_freq(channel_list[i])) {
-			/* Add to 5G list untill 6G conc support is enabled */
+			/* Add to 5G list until 6G conc support is enabled */
 			channel_list_6[chan_index_6++] = channel_list[i];
 		}
 	}
@@ -3708,7 +3708,7 @@ QDF_STATUS policy_mgr_get_channel_list(struct wlan_objmgr_psoc *psoc,
 				      channel_list_6, chan_index_6,
 				      POLICY_MGR_PCL_ORDER_SCC_5G_LOW_5G_LOW);
 		/*
-		 * If no 2.4 GHZ connetcion is present and If 2.4 GHZ is shared
+		 * If no 2.4 GHZ connection is present and If 2.4 GHZ is shared
 		 * with 5 GHz low freq then 2.4 GHz can be added as well
 		 */
 		if (!policy_mgr_2ghz_connection_present(pm_ctx) &&
@@ -3729,7 +3729,7 @@ QDF_STATUS policy_mgr_get_channel_list(struct wlan_objmgr_psoc *psoc,
 				      channel_list_6, chan_index_6,
 				      POLICY_MGR_PCL_ORDER_SCC_5G_HIGH_5G_HIGH);
 		/*
-		 * If no 2.4 GHZ connetcion is present and if 2.4 GHZ is shared
+		 * If no 2.4 GHZ connection is present and if 2.4 GHZ is shared
 		 * with 5 GHz High freq then 2.4 GHz can be added as well
 		 */
 		if (!policy_mgr_2ghz_connection_present(pm_ctx) &&
@@ -4126,7 +4126,7 @@ policy_mgr_get_pref_force_scc_freq(struct wlan_objmgr_psoc *psoc,
  * @vdev_id: vdev id of SAP/GO
  * @intf_ch_freq: interference channel frequency
  * @sap_ch_freq: SAP/GO current home channel frequency
- * @acs_band: acs band perference
+ * @acs_band: acs band preference
  * @allow_6ghz: interface supports 6Ghz band
  *
  * This function gets the force SCC channel in 3 connections case.
@@ -4174,7 +4174,7 @@ policy_mgr_check_force_scc_two_connection(struct wlan_objmgr_psoc *psoc,
 	 * 5Ghz    5Ghz(SBS)      5Ghz           Force SCC to one of 5Ghz
 	 * 5Ghz    5Ghz(SMM)      2Ghz           Start on 2.4Ghz
 	 * 5Ghz    5Ghz(SMM)      5Ghz           Allow SAP on sap_ch_freq if all
-	 *                                       3, 5Ghz freq does't end up
+	 *                                       3, 5Ghz freq doesn't end up
 	 *                                       on same mac, ie 2 of them lead
 	 *                                       to SBS. Else force SCC on
 	 *                                       one of the freq (3 home channel
@@ -4276,7 +4276,7 @@ policy_mgr_check_force_scc_two_connection(struct wlan_objmgr_psoc *psoc,
 		 * -------------------------------------------------
 		 * 5Ghz    5Ghz(SMM)      5Ghz          Allow SAP on sap_ch_freq
 		 *                                      if all 3, 5Ghz freq
-		 *                                      does't end up, on same
+		 *                                      doesn't end up, on same
 		 *                                      mac, ie 2 of them lead
 		 *                                      to SBS, ie at least one
 		 *                                      of them is high 5Ghz and

components/cmn_services/policy_mgr/src/wlan_policy_mgr_get_set_utils.c

@@ -3588,7 +3588,7 @@ policy_mgr_ml_link_vdev_need_to_be_disabled(struct wlan_objmgr_psoc *psoc,
 
 	conc_ext_flags.value = policy_mgr_get_conc_ext_flags(vdev, false);
 	/*
-	 * For non-assoc link vdev set link as disabled if concurency is
+	 * For non-assoc link vdev set link as disabled if concurrency is
 	 * not allowed
 	 */
 	return !policy_mgr_is_concurrency_allowed(psoc, PM_STA_MODE,
@@ -3787,7 +3787,7 @@ void policy_mgr_incr_active_session(struct wlan_objmgr_psoc *psoc,
 	}
 
 	/*
-	 * Need to aquire mutex as entire functionality in this function
+	 * Need to acquire mutex as entire functionality in this function
 	 * is in critical section
 	 */
 	qdf_mutex_acquire(&pm_ctx->qdf_conc_list_lock);
@@ -5314,7 +5314,7 @@ policy_mgr_get_concurrent_num_links(struct wlan_objmgr_vdev *vdev,
 }
 
 static void
-policy_mgr_ml_sta_concurency_on_connect(struct wlan_objmgr_psoc *psoc,
+policy_mgr_ml_sta_concurrency_on_connect(struct wlan_objmgr_psoc *psoc,
 				    struct wlan_objmgr_vdev *vdev,
 				    uint8_t num_ml, uint8_t *ml_idx,
 				    uint8_t num_non_ml, uint8_t *non_ml_idx,
@@ -5481,10 +5481,10 @@ policy_mgr_handle_ml_sta_link_concurrency(struct wlan_objmgr_psoc *psoc,
 	 * secondary STA switch happens to a new channel due to CSA
 	 */
 
-	policy_mgr_ml_sta_concurency_on_connect(psoc, vdev, num_ml,
-						ml_idx, num_non_ml,
-						non_ml_idx, freq_list,
-						vdev_id_list);
+	policy_mgr_ml_sta_concurrency_on_connect(psoc, vdev, num_ml,
+						 ml_idx, num_non_ml,
+						 non_ml_idx, freq_list,
+						 vdev_id_list);
 	return QDF_STATUS_SUCCESS;
 }
 
@@ -5549,7 +5549,7 @@ policy_mgr_get_affected_links_for_go_sap_cli(struct wlan_objmgr_psoc *psoc,
 			/* Continue if SCC */
 			if (ml_freq_lst[i] == p2p_sap_freq_lst[k])
 				continue;
-			/* Continue if high tput ot low latency is not set */
+			/* Continue if high tput or low latency is not set */
 			if (!policy_mgr_is_vdev_high_tput_or_low_latency(psoc,
 			    p2p_sap_vdev_lst[k]))
 				continue;
@@ -5946,7 +5946,7 @@ policy_mgr_handle_ml_sta_link_enable_on_sta_down(struct wlan_objmgr_psoc *psoc,
 						  num_ml_sta, ml_freq_lst,
 						  ml_sta_vdev_lst)) {
 		if (num_disabled_ml_sta)
-			policy_mgr_debug("Not reenabled due to disallowed concurrency");
+			policy_mgr_debug("Not re-enabled due to disallowed concurrency");
 		goto done;
 	}
 
@@ -7086,7 +7086,7 @@ bool policy_mgr_scan_trim_5g_chnls_for_dfs_ap(struct wlan_objmgr_psoc *psoc)
 	}
 
 	/*
-	 * 1) if agile & DFS scans are supportet
+	 * 1) if agile & DFS scans are supported
 	 * 2) if hardware is DBS capable
 	 * 3) if current hw mode is non-dbs
 	 * if all above 3 conditions are true then don't skip any
@@ -8538,7 +8538,7 @@ bool policy_mgr_is_restart_sap_required(struct wlan_objmgr_psoc *psoc,
 		 * STA moves back to 5 GHZ non indoor/non DFS channel
 		 *
 		 * Now SAP has to move to STA 5 GHz channel if SAP
-		 * was started on 5 GHz channel initialy.
+		 * was started on 5 GHz channel initially.
 		 */
 		user_config_freq =
 			policy_mgr_get_user_config_sap_freq(psoc, vdev_id);

components/cmn_services/policy_mgr/src/wlan_policy_mgr_pcl.c

@@ -474,7 +474,7 @@ policy_mgr_reg_chan_change_callback(struct wlan_objmgr_psoc *psoc,
 	}
 
 	/*
-	 * The ch_list buffer can accomadate a maximum of
+	 * The ch_list buffer can accommodate a maximum of
 	 * NUM_CHANNELS and hence the ch_cnt should also not
 	 * exceed NUM_CHANNELS.
 	 */
@@ -573,7 +573,7 @@ void policy_mgr_update_with_safe_channel_list(struct wlan_objmgr_psoc *psoc,
 		}
 		if (is_unsafe && scc_on_lte_coex &&
 		    policy_mgr_is_sta_sap_scc(psoc, current_channel_list[i])) {
-			policy_mgr_debug("CH %d unsafe ingored when STA present on it",
+			policy_mgr_debug("CH %d unsafe ignored when STA present on it",
 					 current_channel_list[i]);
 			is_unsafe = 0;
 		}
@@ -913,7 +913,7 @@ policy_mgr_modify_pcl_based_on_indoor(struct wlan_objmgr_psoc *psoc,
 		include_indoor_channel = true;
 
 	if (include_indoor_channel) {
-		policy_mgr_debug("Indoor channels allowed. PCL not modifed for indoor channels");
+		policy_mgr_debug("Indoor channels allowed. PCL not modified for indoor channels");
 		return QDF_STATUS_SUCCESS;
 	}
 
@@ -2593,7 +2593,7 @@ static void policy_mgr_get_index_for_3_given_freq_sbs(
 	if (policy_mgr_2_freq_same_mac_in_sbs(pm_ctx, freq1, freq2)) {
 		/*
 		 * If freq1 is 2.4 GHZ that mean freq2 is 5 / 6 GHZ.
-		 * so take desision using freq2.
+		 * so take decision using freq2.
 		 */
 		if (WLAN_REG_IS_24GHZ_CH_FREQ(freq1))
 			shared_5_ghz_freq = freq2;
@@ -2603,7 +2603,7 @@ static void policy_mgr_get_index_for_3_given_freq_sbs(
 	} else if (policy_mgr_2_freq_same_mac_in_sbs(pm_ctx, freq2, freq3)) {
 		/*
 		 * If freq2 is 2.4 GHZ that mean freq3 is 5 / 6 GHZ.
-		 * so take desision using freq3.
+		 * so take decision using freq3.
 		 */
 		if (WLAN_REG_IS_24GHZ_CH_FREQ(freq2))
 			shared_5_ghz_freq = freq3;
@@ -2613,7 +2613,7 @@ static void policy_mgr_get_index_for_3_given_freq_sbs(
 	} else if (policy_mgr_2_freq_same_mac_in_sbs(pm_ctx, freq3, freq1)) {
 		/*
 		 * If freq1 is 2.4 GHZ that mean freq3 is 5 / 6 GHZ.
-		 * so take desision using freq3.
+		 * so take decision using freq3.
 		 */
 		if (WLAN_REG_IS_24GHZ_CH_FREQ(freq1))
 			shared_5_ghz_freq = freq3;