disp: msm: sde: add qactive override

This change adds the hooks to enable the active signal override
in power collapse sequence. Active signal override is needed to
disable the clock gating when the power collapse sequence
is running.

Change-Id: I9edaed7960b236b3d0179cb67f9cc2c9b3546c9d
Signed-off-by: Abhijit Kulkarni <[email protected]>

msm/sde/sde_hw_catalog.c

@@ -1740,7 +1740,7 @@ static int sde_ctl_parse_dt(struct device_node *np,
 			set_bit(SDE_CTL_PINGPONG_SPLIT, &ctl->features);
 		if (IS_SDE_CTL_REV_100(sde_cfg->ctl_rev))
 			set_bit(SDE_CTL_ACTIVE_CFG, &ctl->features);
-		if (IS_SDE_UIDLE_REV_100(sde_cfg->uidle_cfg.uidle_rev))
+		if (SDE_UIDLE_MAJOR(sde_cfg->uidle_cfg.uidle_rev))
 			set_bit(SDE_CTL_UIDLE, &ctl->features);
 		if (SDE_HW_MAJOR(sde_cfg->hwversion) >=
 				SDE_HW_MAJOR(SDE_HW_VER_700))
@@ -4222,7 +4222,8 @@ static void _sde_hw_setup_uidle(struct sde_uidle_cfg *uidle_cfg)
 	if (!uidle_cfg->uidle_rev)
 		return;
 
-	if (IS_SDE_UIDLE_REV_100(uidle_cfg->uidle_rev)) {
+	if ((IS_SDE_UIDLE_REV_101(uidle_cfg->uidle_rev)) ||
+			(IS_SDE_UIDLE_REV_100(uidle_cfg->uidle_rev))) {
 		uidle_cfg->fal10_exit_cnt = SDE_UIDLE_FAL10_EXIT_CNT;
 		uidle_cfg->fal10_exit_danger = SDE_UIDLE_FAL10_EXIT_DANGER;
 		uidle_cfg->fal10_danger = SDE_UIDLE_FAL10_DANGER;
@@ -4232,6 +4233,9 @@ static void _sde_hw_setup_uidle(struct sde_uidle_cfg *uidle_cfg)
 		uidle_cfg->max_dwnscale = SDE_UIDLE_MAX_DWNSCALE;
 		uidle_cfg->max_fps = SDE_UIDLE_MAX_FPS;
 		uidle_cfg->debugfs_ctrl = true;
+		if (IS_SDE_UIDLE_REV_101(uidle_cfg->uidle_rev))
+			set_bit(SDE_UIDLE_QACTIVE_OVERRIDE,
+					&uidle_cfg->features);
 	} else {
 		pr_err("invalid uidle rev:0x%x, disabling uidle\n",
 			uidle_cfg->uidle_rev);
@@ -4436,7 +4440,7 @@ static int _sde_hardware_pre_caps(struct sde_mdss_cfg *sde_cfg, uint32_t hw_rev)
 		set_bit(SDE_MDP_DHDR_MEMPOOL_4K, &sde_cfg->mdp[0].features);
 		sde_cfg->has_vig_p010 = true;
 		sde_cfg->true_inline_rot_rev = SDE_INLINE_ROT_VERSION_2_0_0;
-		sde_cfg->uidle_cfg.uidle_rev = SDE_UIDLE_VERSION_1_0_0;
+		sde_cfg->uidle_cfg.uidle_rev = SDE_UIDLE_VERSION_1_0_1;
 		sde_cfg->vbif_disable_inner_outer_shareable = true;
 	} else {
 		SDE_ERROR("unsupported chipset id:%X\n", hw_rev);

msm/sde/sde_hw_catalog.h

@@ -105,9 +105,15 @@
 /*
  * UIDLE supported versions
  */
-#define SDE_UIDLE_VERSION_1_0_0	0x100
+#define SDE_UIDLE_VERSION_1_0_0		0x100
+#define SDE_UIDLE_VERSION_1_0_1		0x101
+
 #define IS_SDE_UIDLE_REV_100(rev) \
 	((rev) == SDE_UIDLE_VERSION_1_0_0)
+#define IS_SDE_UIDLE_REV_101(rev) \
+	((rev) == SDE_UIDLE_VERSION_1_0_1)
+
+#define SDE_UIDLE_MAJOR(rev)		((rev) >> 8)
 
 #define SDE_HW_UBWC_VER(rev) \
 	SDE_HW_VER((((rev) >> 8) & 0xF), (((rev) >> 4) & 0xF), ((rev) & 0xF))
@@ -503,6 +509,16 @@ enum {
 	SDE_VBIF_MAX
 };
 
+/**
+ * uidle features
+ * @SDE_UIDLE_QACTIVE_OVERRIDE    uidle sends qactive signal
+ * @SDE_UIDLE_MAX                 maximum value
+ */
+enum {
+	SDE_UIDLE_QACTIVE_OVERRIDE = 0x1,
+	SDE_UIDLE_MAX
+};
+
 /**
  * MACRO SDE_HW_BLK_INFO - information of HW blocks inside SDE
  * @name:              string name for debug purposes

msm/sde/sde_hw_uidle.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
  *
  */
 
@@ -13,6 +13,7 @@
 #define UIDLE_CTL 0x0
 #define UIDLE_STATUS 0x4
 #define UIDLE_FAL10_VETO_OVERRIDE 0x8
+#define UIDLE_QACTIVE_HF_OVERRIDE 0xc
 
 #define UIDLE_WD_TIMER_CTL 0x10
 #define UIDLE_WD_TIMER_CTL2 0x14
@@ -177,6 +178,18 @@ void sde_hw_uidle_setup_ctl(struct sde_hw_uidle *uidle,
 	SDE_REG_WRITE(c, UIDLE_CTL, reg_val);
 }
 
+static void sde_hw_uilde_active_override(struct sde_hw_uidle *uidle,
+		bool enable)
+{
+	struct sde_hw_blk_reg_map *c = &uidle->hw;
+	u32 reg_val = 0;
+
+	if (enable)
+		reg_val = BIT(0) | BIT(31);
+
+	SDE_REG_WRITE(c, UIDLE_QACTIVE_HF_OVERRIDE, reg_val);
+}
+
 static inline void _setup_uidle_ops(struct sde_hw_uidle_ops *ops,
 		unsigned long cap)
 {
@@ -185,6 +198,8 @@ static inline void _setup_uidle_ops(struct sde_hw_uidle_ops *ops,
 	ops->uidle_setup_cntr = sde_hw_uidle_setup_cntr;
 	ops->uidle_get_cntr = sde_hw_uidle_get_cntr;
 	ops->uidle_get_status = sde_hw_uidle_get_status;
+	if (cap & BIT(SDE_UIDLE_QACTIVE_OVERRIDE))
+		ops->active_override_enable = sde_hw_uilde_active_override;
 }
 
 struct sde_hw_uidle *sde_hw_uidle_init(enum sde_uidle idx,

msm/sde/sde_hw_uidle.h

@@ -104,6 +104,13 @@ struct sde_hw_uidle_ops {
 	void (*uidle_get_status)(struct sde_hw_uidle *uidle,
 		struct sde_uidle_status *status);
 
+	/**
+	 * active_override_enable - enable/disable qactive signal override
+	 * @uidle: uidle context driver
+	 * @enable: enable/disable
+	 */
+	void (*active_override_enable)(struct sde_hw_uidle *uidle,
+			bool enable);
 };
 
 struct sde_hw_uidle {

msm/sde/sde_kms.c

@@ -2901,6 +2901,23 @@ static void _sde_kms_set_lutdma_vbif_remap(struct sde_kms *sde_kms)
 	sde_vbif_set_qos_remap(sde_kms, &qos_params);
 }
 
+static int _sde_kms_active_override(struct sde_kms *sde_kms, bool enable)
+{
+	struct sde_hw_uidle *uidle;
+
+	if (!sde_kms) {
+		SDE_ERROR("invalid kms\n");
+		return -EINVAL;
+	}
+
+	uidle = sde_kms->hw_uidle;
+
+	if (uidle && uidle->ops.active_override_enable)
+		uidle->ops.active_override_enable(uidle, enable);
+
+	return 0;
+}
+
 static void sde_kms_handle_power_event(u32 event_type, void *usr)
 {
 	struct sde_kms *sde_kms = usr;
@@ -2922,6 +2939,7 @@ static void sde_kms_handle_power_event(u32 event_type, void *usr)
 	} else if (event_type == SDE_POWER_EVENT_PRE_DISABLE) {
 		sde_irq_update(msm_kms, false);
 		sde_kms->first_kickoff = false;
+		_sde_kms_active_override(sde_kms, true);
 	}
 }