qcacld-3.0: Fix typographical errors

Fix typographical errors spanned over various files in cld.

Change-Id: I82a7eec4335d617a43c89589418a21885074fde0
CRs-Fixed: 3529627

components/cmn_services/policy_mgr/inc/wlan_policy_mgr_api.h

@@ -1681,7 +1681,7 @@ policy_mgr_current_connections_update(struct wlan_objmgr_psoc *psoc,
  * When a new connection is about to come up, change hw mode for STA/CLI
  * based upon the scan results and hw type.
  *
- * Return: status ifset HW mode is fail or already taken care of.
+ * Return: status if set HW mode is fail or already taken care of.
  */
 QDF_STATUS
 policy_mgr_change_hw_mode_sta_connect(struct wlan_objmgr_psoc *psoc,

components/fw_offload/dispatcher/inc/cfg_adaptive_dwelltime.h

@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2012-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for
  * any purpose with or without fee is hereby granted, provided that the
@@ -78,7 +79,7 @@
 
 /*
  * <ini>
- * adapt_dwell_lpf_weight - weight to caclulate avg low pass filter.
+ * adapt_dwell_lpf_weight - weight to calculate avg low pass filter.
  * @Min: 0
  * @Max: 100
  * @Default: 80

components/pmo/dispatcher/inc/wlan_pmo_common_cfg.h

@@ -356,7 +356,7 @@
  * 0 - Disable both magic pattern match and pattern byte match.
  * 1 - Enable magic pattern match on all interfaces.
  * 2 - Enable pattern byte match on all interfaces.
- * 3 - Enable both magic patter and pattern byte match on all interfaces.
+ * 3 - Enable both magic pattern and pattern byte match on all interfaces.
  *
  * Related: None
  *

components/pmo/dispatcher/inc/wlan_pmo_common_public_struct.h

@@ -153,7 +153,7 @@ enum pmo_wow_interface_pause {
  *  byte match.
  * @PMO_WOW_ENABLE_MAGIC_PATTERN: Enable magic pattern match on all interfaces.
  * @PMO_WOW_ENABLE_PATTERN_BYTE: Enable pattern byte match on all interfaces.
- * @PMO_WOW_ENABLE_BOTH: Enable both magic patter and pattern byte match on
+ * @PMO_WOW_ENABLE_BOTH: Enable both magic pattern and pattern byte match on
  *  all interfaces.
  */
 enum pmo_wow_enable_type {

components/umac/mlme/connection_mgr/dispatcher/inc/wlan_cm_roam_public_struct.h

@@ -1282,7 +1282,7 @@ struct wlan_roam_scan_filter_params {
  * @btm_max_attempt_cnt: Maximum attempt for sending BTM query to ESS
  * @btm_sticky_time: Stick time after roaming to new AP by BTM
  * @disassoc_timer_threshold: threshold value till which the firmware can
- * wait before triggering the roam scan after receiving the disassoc iminent
+ * wait before triggering the roam scan after receiving the disassoc imminent
  * @btm_query_bitmask: bitmask to btm query with candidate list
  * @btm_candidate_min_score: Minimum score of the AP to consider it as a
  * candidate if the roam trigger is BTM kickout.

components/umac/mlme/connection_mgr/utf/inc/cm_utf.h

@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -15,7 +16,7 @@
  */
 
 /*
- * DOC: Implements CM UTF releted functionalities
+ * DOC: Implements CM UTF related functionalities
  */
 
 #ifndef WLAN_MLME_CM_UTF_H

core/hdd/inc/wlan_hdd_power.h

@@ -246,10 +246,10 @@ void hdd_disable_host_offloads(struct hdd_adapter *adapter,
 			       enum pmo_offload_trigger trigger);
 
 /**
- * hdd_set_grat_arp_keepalive() - Enable grat APR keepalive
+ * hdd_set_grat_arp_keepalive() - Enable gratuitous ARP keepalive
  * @adapter: the HDD adapter to configure
  *
- * This configures gratuitous APR keepalive based on the adapter's current
+ * This configures gratuitous ARP keepalive based on the adapter's current
  * connection information, specifically IPv4 address and BSSID
  *
  * return: zero for success, non-zero for failure

core/hdd/src/wlan_hdd_cfg80211.c

@@ -5116,10 +5116,11 @@ const struct nla_policy wlan_hdd_set_roam_param_policy[
 
 /**
  * hdd_set_allow_list() - parse allow list
- * @hdd_ctx:        HDD context
+ * @hdd_ctx: HDD context
  * @rso_config: rso config
- * @tb:            list of attributes
- * @vdev_id:    vdev id
+ * @tb: list of attributes
+ * @vdev_id: vdev id
+ * @rso_usr_cfg: roam userspace params
  *
  * Return: 0 on success; error number on failure
  */
@@ -6634,7 +6635,7 @@ static int hdd_get_roam_control_config(struct hdd_context *hdd_ctx,
  * @data_len: length of @data
  * @vdev_id: vdev id
  * @rso_config: roam params
- * @rso_usr_config: roam userspace params
+ * @rso_usr_cfg: roam userspace params
  *
  * Return: 0 on success; error number on failure
  */

core/hdd/src/wlan_hdd_pre_cac.c

@@ -262,7 +262,7 @@ static int __wlan_hdd_request_pre_cac(struct hdd_context *hdd_ctx,
 	}
 
 	if (!WLAN_REG_IS_24GHZ_CH_FREQ(hdd_ap_ctx->operating_chan_freq)) {
-		hdd_err("pre CAC alllowed only when SAP is in 2.4GHz:%d",
+		hdd_err("pre CAC allowed only when SAP is in 2.4GHz:%d",
 			hdd_ap_ctx->operating_chan_freq);
 		return -EINVAL;
 	}

core/sme/src/qos/sme_qos.c

@@ -7064,7 +7064,7 @@ enum sme_qos_statustype sme_qos_re_request_add_ts(struct mac_context *mac_ctx,
 	case SME_QOS_LINK_UP:
 	default:
 		/* print error msg, */
-		sme_err("ReAdd request in unexpected state = %d",
+		sme_err("Re-Add request in unexpected state = %d",
 			ac_info->curr_state);
 		break;
 	}

core/sme/src/rrm/sme_rrm.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2011-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for
  * any purpose with or without fee is hereby granted, provided that the
@@ -1386,7 +1386,7 @@ QDF_STATUS sme_rrm_neighbor_report_request(struct mac_context *mac, uint8_t
 }
 
 /**
- * rrm_calculate_neighbor_ap_roam_score() - caclulates roam score
+ * rrm_calculate_neighbor_ap_roam_score() - calculates roam score
  * @mac_ctx:                mac global context
  * @pNeighborReportDesc:    Neighbor BSS Descriptor node for which roam score
  *                          should be calculated

core/wma/inc/wma_api.h

@@ -674,7 +674,7 @@ QDF_STATUS wma_vdev_create_set_param(struct wlan_objmgr_vdev *vdev);
 /**
  * wma_send_multi_pdev_vdev_set_params - sends dev(vdev/pdev) set params
  * @param_type: enum of type mlme_dev_setparam
- * @dev_id: id of the perticular vdev/pdev
+ * @dev_id: id of the particular vdev/pdev
  * @param: Array of structure dev_set_param with @n_params combined
  * @n_params: number of params that are combined in @param
  *

core/wma/src/wma_data.c

@@ -644,7 +644,7 @@ static QDF_STATUS wma_encode_mc_rate(uint32_t shortgi, uint32_t chwidth,
 	wma_debug("Input: nss = %d, mbpsx10 = 0x%x, chwidth = %d, shortgi = %d",
 		  nss, mbpsx10_rate, chwidth, shortgi);
 	if ((mbpsx10_rate & 0x40000000) && nss > 0) {
-		/* bit 30 indicates user inputed nss,
+		/* bit 30 indicates user inputted nss,
 		 * bit 28 and 29 used to encode nss
 		 */
 		uint8_t user_nss = (mbpsx10_rate & 0x30000000) >> 28;

os_if/nan/src/os_if_nan.c

@@ -633,7 +633,7 @@ static int os_if_nan_parse_security_params(struct nlattr **tb,
 			struct ndp_service_name *service_name)
 {
 	if (!ncs_sk_type || !pmk || !passphrase || !service_name) {
-		osif_err("out buffers for one ore more parameters is null");
+		osif_err("out buffers for one or more parameters is null");
 		return -EINVAL;
 	}
 
@@ -1254,7 +1254,7 @@ static void os_if_ndp_initiator_rsp_handler(struct wlan_objmgr_vdev *vdev,
 		QCA_NL80211_VENDOR_SUBCMD_NDP_INDEX;
 
 	if (!rsp) {
-		osif_err("Invalid NDP Initator response");
+		osif_err("Invalid NDP Initiator response");
 		return;
 	}
 
@@ -1684,7 +1684,7 @@ os_if_ndp_confirm_ind_handler(struct wlan_objmgr_vdev *vdev,
 		QCA_NL80211_VENDOR_SUBCMD_NDP_INDEX;
 
 	if (!ndp_confirm) {
-		osif_err("Invalid NDP Initator response");
+		osif_err("Invalid NDP Initiator response");
 		return;
 	}