disp: msm: dp: add support for continuous PPS command

Add support to send PPS command with every frame for DP.
This is needed to satisfy the requirement of certain bridge
chips which need the PPS to be sent every frame.

Change-Id: I8711dff41e60d8b1e1c515a5d34a370a2409ce14
Signed-off-by: Abhinav Kumar <[email protected]>
Signed-off-by: Sudarsan Ramesh <[email protected]>

msm/dp/dp_catalog.c

@@ -1534,6 +1534,7 @@ static void dp_catalog_panel_dp_flush(struct dp_catalog_panel *panel,
 	struct dp_catalog_private *catalog;
 	struct dp_io_data *io_data;
 	u32 dp_flush, offset;
+	struct dp_dsc_cfg_data *dsc;
 
 	if (!panel) {
 		DP_ERR("invalid input\n");
@@ -1547,6 +1548,7 @@ static void dp_catalog_panel_dp_flush(struct dp_catalog_panel *panel,
 
 	catalog = dp_catalog_get_priv(panel);
 	io_data = catalog->io.dp_link;
+	dsc = &panel->dsc;
 
 	if (panel->stream_id == DP_STREAM_0)
 		offset = 0;
@@ -1554,6 +1556,11 @@ static void dp_catalog_panel_dp_flush(struct dp_catalog_panel *panel,
 		offset = MMSS_DP1_FLUSH - MMSS_DP_FLUSH;
 
 	dp_flush = dp_read(MMSS_DP_FLUSH + offset);
+
+	if ((flush_bit == DP_PPS_FLUSH) &&
+		dsc->continuous_pps)
+		dp_flush &= ~BIT(2);
+
 	dp_flush |= BIT(flush_bit);
 	dp_write(MMSS_DP_FLUSH + offset, dp_flush);
 }

msm/dp/dp_catalog.h

@@ -149,6 +149,7 @@ struct dp_catalog_audio {
 
 struct dp_dsc_cfg_data {
 	bool dsc_en;
+	bool continuous_pps;
 	char pps[128];
 	u32 pps_len;
 	u32 pps_word[32];

msm/dp/dp_display.c

@@ -1883,6 +1883,7 @@ static int dp_init_sub_modules(struct dp_display_private *dp)
 	}
 
 	g_dp_display->is_mst_supported = dp->parser->has_mst;
+	g_dp_display->dsc_cont_pps = dp->parser->dsc_continuous_pps;
 
 	dp->catalog = dp_catalog_get(dev, dp->parser);
 	if (IS_ERR(dp->catalog)) {

msm/dp/dp_display.h

@@ -70,6 +70,7 @@ struct dp_display {
 	void *base_dp_panel;
 	bool is_sst_connected;
 	bool is_mst_supported;
+	bool dsc_cont_pps;
 	u32 max_pclk_khz;
 	void *dp_mst_prv_info;
 	u32 max_mixer_count;

msm/dp/dp_drm.c

@@ -366,6 +366,10 @@ int dp_connector_post_init(struct drm_connector *connector, void *display)
 	dp_display->bridge->dp_panel = sde_conn->drv_panel;
 
 	rc = dp_mst_init(dp_display);
+
+	if (dp_display->dsc_cont_pps)
+		sde_conn->ops.update_pps = NULL;
+
 end:
 	return rc;
 }

msm/dp/dp_mst_drm.c

@@ -1768,6 +1768,21 @@ static void dp_mst_connector_pre_destroy(struct drm_connector *connector,
 	SDE_EVT32_EXTERNAL(SDE_EVTLOG_FUNC_EXIT, conn_id);
 }
 
+static int dp_mst_connector_post_init(struct drm_connector *connector,
+		void *display)
+{
+	struct dp_display *dp_display = display;
+	struct sde_connector *sde_conn = to_sde_connector(connector);
+
+	if (!dp_display || !connector)
+		return -EINVAL;
+
+	if (dp_display->dsc_cont_pps)
+		sde_conn->ops.update_pps = NULL;
+
+	return 0;
+}
+
 /* DRM MST callbacks */
 
 static struct drm_connector *
@@ -1775,7 +1790,7 @@ dp_mst_add_connector(struct drm_dp_mst_topology_mgr *mgr,
 		struct drm_dp_mst_port *port, const char *pathprop)
 {
 	static const struct sde_connector_ops dp_mst_connector_ops = {
-		.post_init  = NULL,
+		.post_init  = dp_mst_connector_post_init,
 		.detect     = dp_mst_connector_detect,
 		.get_modes  = dp_mst_connector_get_modes,
 		.mode_valid = dp_mst_connector_mode_valid,
@@ -2120,7 +2135,7 @@ dp_mst_drm_fixed_connector_init(struct dp_display *dp_display,
 			struct drm_encoder *encoder)
 {
 	static const struct sde_connector_ops dp_mst_connector_ops = {
-		.post_init  = NULL,
+		.post_init  = dp_mst_connector_post_init,
 		.detect     = dp_mst_fixed_connector_detect,
 		.get_modes  = dp_mst_connector_get_modes,
 		.mode_valid = dp_mst_connector_mode_valid,

msm/dp/dp_panel.c

@@ -2202,7 +2202,7 @@ static void dp_panel_config_dsc(struct dp_panel *dp_panel, bool enable)
 		dsc->be_in_lane = _dp_panel_calc_be_in_lane(dp_panel);
 		dsc->dsc_en = true;
 		dsc->dto_en = true;
-
+		dsc->continuous_pps = dp_panel->dsc_continuous_pps;
 		dp_panel_get_dto_params(comp_info->comp_ratio, &dsc->dto_n,
 				&dsc->dto_d, pinfo->bpp);
 	} else {
@@ -2210,6 +2210,7 @@ static void dp_panel_config_dsc(struct dp_panel *dp_panel, bool enable)
 		dsc->dto_en = false;
 		dsc->dto_n = 0;
 		dsc->dto_d = 0;
+		dsc->continuous_pps = false;
 	}
 
 	catalog->stream_id = dp_panel->stream_id;
@@ -3007,6 +3008,7 @@ struct dp_panel *dp_panel_get(struct dp_panel_in *in)
 
 	dp_panel->dsc_feature_enable = panel->parser->dsc_feature_enable;
 	dp_panel->fec_feature_enable = panel->parser->fec_feature_enable;
+	dp_panel->dsc_continuous_pps = panel->parser->dsc_continuous_pps;
 
 	if (in->base_panel) {
 		memcpy(dp_panel->dpcd, in->base_panel->dpcd,

msm/dp/dp_panel.h

@@ -133,6 +133,7 @@ struct dp_panel {
 	bool dsc_en;
 	bool fec_en;
 	bool widebus_en;
+	bool dsc_continuous_pps;
 	bool mst_state;
 
 	s64 fec_overhead_fp;

msm/dp/dp_parser.c

@@ -727,8 +727,13 @@ static void dp_parser_dsc(struct dp_parser *parser)
 	parser->dsc_feature_enable = of_property_read_bool(dev->of_node,
 			"qcom,dsc-feature-enable");
 
+	parser->dsc_continuous_pps = of_property_read_bool(dev->of_node,
+			"qcom,dsc-continuous-pps");
+
 	DP_DEBUG("dsc parsing successful. dsc:%d\n",
 			parser->dsc_feature_enable);
+	DP_DEBUG("cont_pps:%d\n",
+			parser->dsc_continuous_pps);
 }
 
 static void dp_parser_fec(struct dp_parser *parser)

msm/dp/dp_parser.h

@@ -195,6 +195,7 @@ static inline char *dp_phy_aux_config_type_to_string(u32 cfg_type)
  * @gpio_aux_switch: presence GPIO AUX switch status
  * @dsc_feature_enable: DSC feature enable status
  * @fec_feature_enable: FEC feature enable status
+ * @dsc_continuous_pps: PPS sent every frame by HW
  * @has_widebus: widebus (2PPC) feature eanble status
   *@mst_fixed_port: mst port_num reserved for fixed topology
  * @parse: function to be called by client to parse device tree.
@@ -221,6 +222,7 @@ struct dp_parser {
 	bool no_aux_switch;
 	bool dsc_feature_enable;
 	bool fec_feature_enable;
+	bool dsc_continuous_pps;
 	bool has_widebus;
 	bool gpio_aux_switch;
 	bool lphw_hpd;