qcacld-3.0: Refine mlme btm configurations

Refine mlme btm configurations based on converged cfg component.
Remove related legacy codes.

Change-Id: I0a90eceea5636e268048ed6bf1532150dc1f6b24
CRs-Fixed: 2355353

components/mlme/dispatcher/inc/cfg_mlme_btm.h

@@ -0,0 +1,147 @@
+/*
+ * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/**
+ * DOC: This file contains MLME BTM related CFG/INI Items.
+ */
+
+#ifndef CFG_MLME_BTM_H_
+#define CFG_MLME_BTM_H_
+
+/*
+ * <ini>
+ * btm_offload_config - Configure BTM
+ * @Min: 0x00000000
+ * @Max: 0xFFFFFFFF
+ * @Default: 0x00000001
+ *
+ * This ini is used to configure BTM
+ *
+ * Bit 0: Enable/Disable the BTM offload. Set this to 1 will
+ * enable and 0 will disable BTM offload.
+ *
+ * BIT 2, 1: Action on non matching candidate with cache. If a BTM request
+ * is received from AP then the candidate AP's may/may-not be present in
+ * the firmware scan cache . Based on below config firmware will decide
+ * whether to forward BTM frame to host or consume with firmware and proceed
+ * with Roaming to candidate AP.
+ * 00 scan and consume
+ * 01 no scan and forward to host
+ * 10, 11 reserved
+ *
+ * BIT 5, 4, 3: Roaming handoff decisions on multiple candidates match
+ * 000 match if exact BSSIDs are found
+ * 001 match if at least one top priority BSSID only
+ * 010, 011, 100, 101, 110, 111 reserved
+ *
+ * BIT 6: Set this to 1 will send BTM query frame and 0 not sent.
+ *
+ * BIT 7-31: Reserved
+ *
+ * Supported Feature: STA
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_BTM_ENABLE CFG_INI_UINT( \
+	"btm_offload_config", \
+	0x00000000, \
+	0xffffffff, \
+	0x00000001, \
+	CFG_VALUE_OR_DEFAULT, \
+	"configure btm offload")
+
+/*
+ * <ini>
+ * btm_solicited_timeout - timeout value for waiting BTM request
+ * @Min: 1
+ * @Max: 10000
+ * @Default: 100
+ *
+ * This ini is used to configure timeout value for waiting BTM request.
+ * Unit: millionsecond
+ *
+ * Supported Feature: STA
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_BTM_SOLICITED_TIMEOUT CFG_INI_UINT( \
+	"btm_solicited_timeout", \
+	1, \
+	10000, \
+	100, \
+	CFG_VALUE_OR_DEFAULT, \
+	"configure timeout value for waiting BTM request")
+
+/*
+ * <ini>
+ * btm_max_attempt_cnt - Maximum attempt for sending BTM query to ESS
+ * @Min: 1
+ * @Max: 0xFFFFFFFF
+ * @Default: 3
+ *
+ * This ini is used to configure maximum attempt for sending BTM query to ESS.
+ *
+ * Supported Feature: STA
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_BTM_MAX_ATTEMPT_CNT CFG_INI_UINT( \
+	"btm_max_attempt_cnt", \
+	1, \
+	0xFFFFFFFF, \
+	3, \
+	CFG_VALUE_OR_DEFAULT, \
+	"configure maximum attempt for sending BTM query to ESS")
+
+/*
+ * <ini>
+ * btm_sticky_time - Stick time after roaming to new AP by BTM
+ * @Min: 0
+ * @Max: 0x0000FFFF
+ * @Default: 300
+ *
+ * This ini is used to configure Stick time after roaming to new AP by BTM.
+ * Unit: seconds
+ *
+ * Supported Feature: STA
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_BTM_STICKY_TIME CFG_INI_UINT( \
+	"btm_sticky_time", \
+	0, \
+	0x0000FFFF, \
+	300, \
+	CFG_VALUE_OR_DEFAULT, \
+	"configure Stick time after roaming to new AP by BTM")
+
+#define CFG_BTM_ALL \
+	CFG(CFG_BTM_ENABLE) \
+	CFG(CFG_BTM_SOLICITED_TIMEOUT) \
+	CFG(CFG_BTM_MAX_ATTEMPT_CNT) \
+	CFG(CFG_BTM_STICKY_TIME)
+
+#endif /* CFG_MLME_BTM_H_ */