disp: msm: sde: enable uidle on pineapple target

Pineapple target adds support for writeback contributing to
fal status. This removes the need to signal fal10 veto in those
usecases. In addition, it is no longer needed to program uidle
active per ctl path.

Change-Id: I5e3509fa6399d212563322d51eba04c38a41e9b8
Signed-off-by: Nilaan Gunabalachandran <quic_ngunabal@quicinc.com>

msm/sde/sde_encoder.c

@@ -236,6 +236,9 @@ static void _sde_encoder_control_fal10_veto(struct drm_encoder *drm_enc, bool ve
 	if (!sde_kms || !sde_kms->hw_uidle || !sde_kms->hw_uidle->ops.uidle_fal10_override)
 		return;
 
+	if (test_bit(SDE_UIDLE_WB_FAL_STATUS, &sde_kms->catalog->uidle_cfg.features))
+		return;
+
 	/*
 	 * clone mode is the only scenario where we want to enable software override
 	 * of fal10 veto.

msm/sde/sde_hw_catalog.c

@@ -157,6 +157,7 @@
 #define SDE_UIDLE_FAL1_MAX_THRESHOLD 15
 #define SDE_UIDLE_FAL1_MAX_THRESHOLD_EXT_REV_102 255
 #define SDE_UIDLE_FAL1_MAX_THRESHOLD_EXT_REV_103 255
+#define SDE_UIDLE_FAL1_MAX_THRESHOLD_EXT_REV_104 255
 #define SDE_UIDLE_FAL10_THRESHOLD_60 12
 #define SDE_UIDLE_FAL10_THRESHOLD_90 13
 #define SDE_UIDLE_MAX_DWNSCALE 1500
@@ -2035,7 +2036,8 @@ static int sde_ctl_parse_dt(struct device_node *np,
 			set_bit(SDE_CTL_PINGPONG_SPLIT, &ctl->features);
 		if (IS_SDE_CTL_REV_100(sde_cfg->ctl_rev))
 			set_bit(SDE_CTL_ACTIVE_CFG, &ctl->features);
-		if (SDE_UIDLE_MAJOR(sde_cfg->uidle_cfg.uidle_rev))
+		if (SDE_UIDLE_MAJOR(sde_cfg->uidle_cfg.uidle_rev) &&
+				sde_cfg->uidle_cfg.uidle_rev < SDE_UIDLE_VERSION_1_0_4)
 			set_bit(SDE_CTL_UIDLE, &ctl->features);
 		if (SDE_HW_MAJOR(sde_cfg->hw_rev) >= SDE_HW_MAJOR(SDE_HW_VER_700))
 			set_bit(SDE_CTL_UNIFIED_DSPP_FLUSH, &ctl->features);
@@ -4860,6 +4862,13 @@ static void _sde_hw_setup_uidle(struct sde_uidle_cfg *uidle_cfg)
 		uidle_cfg->max_fal1_fps = SDE_UIDLE_MAX_FPS_240;
 		uidle_cfg->fal1_max_threshold = SDE_UIDLE_FAL1_MAX_THRESHOLD_EXT_REV_103;
 		uidle_cfg->fal10_threshold = SDE_UIDLE_FAL10_THRESHOLD_60;
+	} else if (IS_SDE_UIDLE_REV_104(uidle_cfg->uidle_rev)) {
+		set_bit(SDE_UIDLE_QACTIVE_OVERRIDE, &uidle_cfg->features);
+		uidle_cfg->max_fps = SDE_UIDLE_MAX_FPS_240;
+		uidle_cfg->max_fal1_fps = SDE_UIDLE_MAX_FPS_240;
+		uidle_cfg->fal1_max_threshold = SDE_UIDLE_FAL1_MAX_THRESHOLD_EXT_REV_104;
+		uidle_cfg->fal10_threshold = SDE_UIDLE_FAL10_THRESHOLD_60;
+		set_bit(SDE_UIDLE_WB_FAL_STATUS, &uidle_cfg->features);
 	}
 }
 
@@ -5262,6 +5271,7 @@ static int _sde_hardware_pre_caps(struct sde_mdss_cfg *sde_cfg, uint32_t hw_rev)
 		sde_cfg->ts_prefill_rev = 2;
 		sde_cfg->ctl_rev = SDE_CTL_CFG_VERSION_1_0_0;
 		sde_cfg->true_inline_rot_rev = SDE_INLINE_ROT_VERSION_2_0_1;
+		sde_cfg->uidle_cfg.uidle_rev = SDE_UIDLE_VERSION_1_0_4;
 		sde_cfg->sid_rev = SDE_SID_VERSION_2_0_0;
 		sde_cfg->mdss_hw_block_size = 0x158;
 		sde_cfg->demura_supported[SSPP_DMA1][0] = 0;

msm/sde/sde_hw_catalog.h

@@ -158,6 +158,7 @@
 #define SDE_UIDLE_VERSION_1_0_1		0x101
 #define SDE_UIDLE_VERSION_1_0_2		0x102
 #define SDE_UIDLE_VERSION_1_0_3		0x103
+#define SDE_UIDLE_VERSION_1_0_4		0x104
 
 #define IS_SDE_UIDLE_REV_100(rev) \
 	((rev) == SDE_UIDLE_VERSION_1_0_0)
@@ -167,6 +168,8 @@
 	((rev) == SDE_UIDLE_VERSION_1_0_2)
 #define IS_SDE_UIDLE_REV_103(rev) \
 	((rev) == SDE_UIDLE_VERSION_1_0_3)
+#define IS_SDE_UIDLE_REV_104(rev) \
+	((rev) == SDE_UIDLE_VERSION_1_0_4)
 
 #define SDE_UIDLE_MAJOR(rev)		((rev) >> 8)
 
@@ -693,10 +696,12 @@ enum {
 /**
  * uidle features
  * @SDE_UIDLE_QACTIVE_OVERRIDE    uidle sends qactive signal
+ * @SDE_UIDLE_WB_FAL_STATUS       wb contributes to fal status
  * @SDE_UIDLE_MAX                 maximum value
  */
 enum {
 	SDE_UIDLE_QACTIVE_OVERRIDE = 0x1,
+	SDE_UIDLE_WB_FAL_STATUS,
 	SDE_UIDLE_MAX
 };