samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Forkuj 0
Kod Zgłoszenia Oczekujące zmiany Actions Packages Projekty Wydania Wiki Aktywność

fw-api: CL 8188153 - update fw common interface files

Przeglądaj źródła 
Change-Id: Ia67da22639fd31eb83858023418ab607ca0069cf
HTT: define T2H and H2T CHAN_CALDATA msgs
CRs-Fixed: 2262693
This commit is contained in:
spuligil
2019-09-20 12:00:56 -07:00
zatwierdzone przez nshrivas
rodzic b6aeb1518f
commit 66a9bd7ae0
1 zmienionych plików z 230 dodań i 12 usunięć
Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

242
fw/htt.h
Wyświetl plik

@@ -193,9 +193,11 @@
* HTT_H2T_MSG_TYPE_RX_FSE_SETUP_CFG, HTT_H2T_MSG_TYPE_RX_FSE_OPERATION_CFG
* 3.72 Add tx_retry_cnt fields to htt_tx_offload_deliver_ind_hdr_t and
* htt_tx_data_hdr_information
* 3.73 Add channel pre-calibration data upload and download messages defs for
* HTT_T2H_MSG_TYPE_CHAN_CALDATA and HTT_H2T_MSG_TYPE_CHAN_CALDATA
*/
#define HTT_CURRENT_VERSION_MAJOR 3
#define HTT_CURRENT_VERSION_MINOR 72
#define HTT_CURRENT_VERSION_MINOR 73
#define HTT_NUM_TX_FRAG_DESC 1024
@@ -536,6 +538,7 @@ enum htt_h2t_msg_type {
HTT_H2T_MSG_TYPE_PPDU_STATS_CFG = 0x11,
HTT_H2T_MSG_TYPE_RX_FSE_SETUP_CFG = 0x12,
HTT_H2T_MSG_TYPE_RX_FSE_OPERATION_CFG = 0x13,
HTT_H2T_MSG_TYPE_CHAN_CALDATA = 0x14,
/* keep this last */
HTT_H2T_NUM_MSGS
@@ -6340,6 +6343,7 @@ enum htt_t2h_msg_type {
* to provide to the monitor mode interface.
*/
HTT_T2H_MSG_TYPE_TX_OFFLOAD_DELIVER_IND = 0x25,
HTT_T2H_MSG_TYPE_CHAN_CALDATA = 0x26,
HTT_T2H_MSG_TYPE_TEST,
/* keep this last */
@@ -13046,27 +13050,39 @@ struct htt_ul_ofdma_user_info_v0 {
A_UINT32 word1;
};
#define HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W0 \
A_UINT32 w0_fw_rsvd:30; \
A_UINT32 w0_valid:1; \
A_UINT32 w0_version:1;
struct htt_ul_ofdma_user_info_v0_bitmap_w0 {
HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W0
};
#define HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W1 \
A_UINT32 w1_nss:3; \
A_UINT32 w1_mcs:4; \
A_UINT32 w1_ldpc:1; \
A_UINT32 w1_dcm:1; \
A_UINT32 w1_ru_start:7; \
A_UINT32 w1_ru_size:3; \
A_UINT32 w1_trig_type:4; \
A_UINT32 w1_unused:9;
struct htt_ul_ofdma_user_info_v0_bitmap_w1 {
HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W1
};
/* htt_up_ofdma_user_info_v0_bitmap shows what bitfields are within the info */
PREPACK struct htt_ul_ofdma_user_info_v0_bitmap {
union {
A_UINT32 word0;
struct {
A_UINT32 w0_fw_rsvd:30;
A_UINT32 w0_valid:1;
A_UINT32 w0_version:1;
HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W0
};
};
union {
A_UINT32 word1;
struct {
A_UINT32 w1_nss:3;
A_UINT32 w1_mcs:4;
A_UINT32 w1_ldpc:1;
A_UINT32 w1_dcm:1;
A_UINT32 w1_ru_start:7;
A_UINT32 w1_ru_size:3;
A_UINT32 w1_trig_type:4;
A_UINT32 w1_unused:9;
HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W1
};
};
} POSTPACK;
@@ -13218,5 +13234,207 @@ enum HTT_UL_OFDMA_TRIG_TYPE {
((word) |= ((_val) << HTT_UL_OFDMA_USER_INFO_V0_W1_RU_TRIG_TYP_S)); \
} while (0)
/**
* @brief target -> host channel calibration data message
* @brief host -> target channel calibration data message
*
* @details
* The following field definitions describe the format of the channel
* calibration data message sent from the target to the host when
* MSG_TYPE is HTT_T2H_MSG_TYPE_CHAN_CALDATA, and sent from the host
* to the target when MSG_TYPE is HTT_H2T_MSG_TYPE_CHAN_CALDATA.
* The message is defined as htt_chan_caldata_msg followed by a variable
* number of 32-bit character values.
*
* |31 21|20|19 16|15 13| 12|11 8|7 0|
* |------------------------------------------------------------------|
* | rsv | A| frag | rsv |ck_v| sub_type| msg type |
* |------------------------------------------------------------------|
* | payload size | mhz |
* |------------------------------------------------------------------|
* | center frequency 2 | center frequency 1 |
* |------------------------------------------------------------------|
* | check sum |
* |------------------------------------------------------------------|
* | payload |
* |------------------------------------------------------------------|
* message info field:
* - MSG_TYPE
* Bits 7:0
* Purpose: identifies this as a channel calibration data message
* Value: HTT_T2H_MSG_TYPE_CHAN_CALDATA (0x15) or
* HTT_H2T_MSG_TYPE_CHAN_CALDATA (0xb)
* - SUB_TYPE
* Bits 11:8
* Purpose: T2H: indicates whether target is providing chan cal data
* to the host to store, or requesting that the host
* download previously-stored data.
* H2T: indicates whether the host is providing the requested
* channel cal data, or if it is rejecting the data
* request because it does not have the requested data.
* Value: see HTT_T2H_MSG_CHAN_CALDATA_xxx defs
* - CHKSUM_VALID
* Bit 12
* Purpose: indicates if the checksum field is valid
* value:
* - FRAG
* Bit 19:16
* Purpose: indicates the fragment index for message
* value: 0 for first fragment, 1 for second fragment, ...
* - APPEND
* Bit 20
* Purpose: indicates if this is the last fragment
* value: 0 = final fragment, 1 = more fragments will be appended
*
* channel and payload size field
* - MHZ
* Bits 15:0
* Purpose: indicates the channel primary frequency
* Value:
* - PAYLOAD_SIZE
* Bits 31:16
* Purpose: indicates the bytes of calibration data in payload
* Value:
*
* center frequency field
* - CENTER FREQUENCY 1
* Bits 15:0
* Purpose: indicates the channel center frequency
* Value: channel center frequency, in MHz units
* - CENTER FREQUENCY 2
* Bits 31:16
* Purpose: indicates the secondary channel center frequency,
* only for 11acvht 80plus80 mode
* Value: secondary channel center frequeny, in MHz units, if applicable
*
* checksum field
* - CHECK_SUM
* Bits 31:0
* Purpose: check the payload data, it is just for this fragment.
* This is intended for the target to check that the channel
* calibration data returned by the host is the unmodified data
* that was previously provided to the host by the target.
* value: checksum of fragment payload
*/
PREPACK struct htt_chan_caldata_msg {
/* DWORD 0: message info */
A_UINT32
msg_type: 8,
sub_type: 4 ,
chksum_valid: 1, /** 1:valid, 0:invalid */
reserved1: 3,
frag_idx: 4, /** fragment index for calibration data */
appending: 1, /** 0: no fragment appending,
* 1: extra fragment appending */
reserved2: 11;
/* DWORD 1: channel and payload size */
A_UINT32
mhz: 16, /** primary 20 MHz channel frequency in mhz */
payload_size: 16; /** unit: bytes */
/* DWORD 2: center frequency */
A_UINT32
band_center_freq1: 16, /** Center frequency 1 in MHz */
band_center_freq2: 16; /** Center frequency 2 in MHz,
* valid only for 11acvht 80plus80 mode */
/* DWORD 3: check sum */
A_UINT32 chksum;
/* variable length for calibration data */
A_UINT32 payload[1/* or more */];
} POSTPACK;
/* T2H SUBTYPE */
#define HTT_T2H_MSG_CHAN_CALDATA_REQ 0
#define HTT_T2H_MSG_CHAN_CALDATA_UPLOAD 1
/* H2T SUBTYPE */
#define HTT_H2T_MSG_CHAN_CALDATA_REJ 0
#define HTT_H2T_MSG_CHAN_CALDATA_DOWNLOAD 1
#define HTT_CHAN_CALDATA_MSG_SUB_TYPE_S 8
#define HTT_CHAN_CALDATA_MSG_SUB_TYPE_M 0x00000f00
#define HTT_CHAN_CALDATA_MSG_SUB_TYPE_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_SUB_TYPE_M) >> HTT_CHAN_CALDATA_MSG_SUB_TYPE_S)
#define HTT_CHAN_CALDATA_MSG_SUB_TYPE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_SUB_TYPE, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_SUB_TYPE_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_CHKSUM_V_S 12
#define HTT_CHAN_CALDATA_MSG_CHKSUM_V_M 0x00001000
#define HTT_CHAN_CALDATA_MSG_CHKSUM_V_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_CHKSUM_V_M) >> HTT_CHAN_CALDATA_MSG_CHKSUM_V_S)
#define HTT_CHAN_CALDATA_MSG_CHKSUM_V_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_CHKSUM_V, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_CHKSUM_V_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_FRAG_IDX_S 16
#define HTT_CHAN_CALDATA_MSG_FRAG_IDX_M 0x000f0000
#define HTT_CHAN_CALDATA_MSG_FRAG_IDX_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_FRAG_IDX_M) >> HTT_CHAN_CALDATA_MSG_FRAG_IDX_S)
#define HTT_CHAN_CALDATA_MSG_FRAG_IDX_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_FRAG_IDX, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_FRAG_IDX_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_APPENDING_S 20
#define HTT_CHAN_CALDATA_MSG_APPENDING_M 0x00100000
#define HTT_CHAN_CALDATA_MSG_APPENDING_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_APPENDING_M) >> HTT_CHAN_CALDATA_MSG_APPENDING_S)
#define HTT_CHAN_CALDATA_MSG_APPENDING_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_APPENDING, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_APPENDING_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_MHZ_S 0
#define HTT_CHAN_CALDATA_MSG_MHZ_M 0x0000ffff
#define HTT_CHAN_CALDATA_MSG_MHZ_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_MHZ_M) >> HTT_CHAN_CALDATA_MSG_MHZ_S)
#define HTT_CHAN_CALDATA_MSG_MHZ_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_MHZ, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_MHZ_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_PLD_SIZE_S 0
#define HTT_CHAN_CALDATA_MSG_PLD_SIZE_M 0xffff0000
#define HTT_CHAN_CALDATA_MSG_PLD_SIZE_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_PLD_SIZE_M) >> HTT_CHAN_CALDATA_MSG_PLD_SIZE_S)
#define HTT_CHAN_CALDATA_MSG_PLD_SIZE_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_PLD_SIZE, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_PLD_SIZE_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_FREQ1_S 0
#define HTT_CHAN_CALDATA_MSG_FREQ1_M 0x0000ffff
#define HTT_CHAN_CALDATA_MSG_FREQ1_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_FREQ1_M) >> HTT_CHAN_CALDATA_MSG_FREQ1_S)
#define HTT_CHAN_CALDATA_MSG_FREQ1_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_FREQ1, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_FREQ1_S)); \
} while (0)
#define HTT_CHAN_CALDATA_MSG_FREQ2_S 16
#define HTT_CHAN_CALDATA_MSG_FREQ2_M 0xffff0000
#define HTT_CHAN_CALDATA_MSG_FREQ2_GET(_var) \
(((_var) & HTT_CHAN_CALDATA_MSG_FREQ2_M) >> HTT_CHAN_CALDATA_MSG_FREQ2_S)
#define HTT_CHAN_CALDATA_MSG_FREQ2_SET(_var, _val) \
do { \
HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_FREQ2, _val); \
((_var) |= ((_val) << HTT_CHAN_CALDATA_MSG_FREQ2_S)); \
} while (0)
#endif