disp: add rev checks for bengal target

Add revision checks to support bengal target
for dpu and rotation driver.

Change-Id: I7eb8bd2943b94ab246889b1f74cd9613aeee2b2f
Signed-off-by: Yashwanth <[email protected]>

msm/sde/sde_hw_catalog.c

@@ -4235,6 +4235,19 @@ static int _sde_hardware_pre_caps(struct sde_mdss_cfg *sde_cfg, uint32_t hw_rev)
 		sde_cfg->sui_block_xin_mask = 0xC61;
 		sde_cfg->has_hdr = false;
 		sde_cfg->has_sui_blendstage = true;
+	} else if (IS_BENGAL_TARGET(hw_rev)) {
+		sde_cfg->has_cwb_support = false;
+		sde_cfg->has_qsync = true;
+		sde_cfg->perf.min_prefill_lines = 24;
+		sde_cfg->vbif_qos_nlvl = 8;
+		sde_cfg->ts_prefill_rev = 2;
+		sde_cfg->ctl_rev = SDE_CTL_CFG_VERSION_1_0_0;
+		sde_cfg->delay_prg_fetch_start = true;
+		sde_cfg->sui_ns_allowed = true;
+		sde_cfg->sui_misr_supported = true;
+		sde_cfg->sui_block_xin_mask = 0xC01;
+		sde_cfg->has_hdr = false;
+		sde_cfg->has_sui_blendstage = true;
 	} else {
 		SDE_ERROR("unsupported chipset id:%X\n", hw_rev);
 		sde_cfg->perf.min_prefill_lines = 0xffff;

msm/sde/sde_hw_catalog.h

@@ -53,6 +53,7 @@
 #define SDE_HW_VER_540	SDE_HW_VER(5, 4, 0) /* sdmtrinket v1.0 */
 #define SDE_HW_VER_600	SDE_HW_VER(6, 0, 0) /* kona */
 #define SDE_HW_VER_610	SDE_HW_VER(6, 1, 0) /* sm7250 */
+#define SDE_HW_VER_630	SDE_HW_VER(6, 3, 0) /* bengal */
 
 #define IS_MSM8996_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_170)
 #define IS_MSM8998_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_300)
@@ -65,6 +66,7 @@
 #define IS_SDMTRINKET_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_540)
 #define IS_KONA_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_600)
 #define IS_SAIPAN_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_610)
+#define IS_BENGAL_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_630)
 
 #define SDE_HW_BLK_NAME_LEN	16
 

msm/sde/sde_hw_lm.c

@@ -287,7 +287,8 @@ static void _setup_mixer_ops(struct sde_mdss_cfg *m,
 			IS_SDMMAGPIE_TARGET(m->hwversion) ||
 			IS_KONA_TARGET(m->hwversion) ||
 			IS_SAIPAN_TARGET(m->hwversion) ||
-			IS_SDMTRINKET_TARGET(m->hwversion))
+			IS_SDMTRINKET_TARGET(m->hwversion) ||
+			IS_BENGAL_TARGET(m->hwversion))
 		ops->setup_blend_config = sde_hw_lm_setup_blend_config_sdm845;
 	else
 		ops->setup_blend_config = sde_hw_lm_setup_blend_config;

msm/sde/sde_hw_vbif.c

@@ -236,7 +236,8 @@ static void _setup_vbif_ops(const struct sde_mdss_cfg *m,
 		ops->set_qos_remap = sde_hw_set_qos_remap;
 	if (IS_SM8150_TARGET(m->hwversion) || IS_SM6150_TARGET(m->hwversion) ||
 			IS_SDMMAGPIE_TARGET(m->hwversion) ||
-			IS_SDMTRINKET_TARGET(m->hwversion))
+			IS_SDMTRINKET_TARGET(m->hwversion) ||
+			IS_BENGAL_TARGET(m->hwversion))
 		ops->set_mem_type = sde_hw_set_mem_type_v1;
 	else
 		ops->set_mem_type = sde_hw_set_mem_type;

rotator/sde_rotator_base.h

@@ -45,6 +45,7 @@
 #define SDE_MDP_HW_REV_530	SDE_MDP_REV(5, 3, 0)	/* sm6150 v1.0 */
 #define SDE_MDP_HW_REV_540	SDE_MDP_REV(5, 4, 0)	/* sdmtrinket v1.0 */
 #define SDE_MDP_HW_REV_600	SDE_MDP_REV(6, 0, 0)    /* msmnile+ v1.0 */
+#define SDE_MDP_HW_REV_630	SDE_MDP_REV(6, 3, 0)	/* bengal v1.0 */
 
 #define SDE_MDP_VBIF_4_LEVEL_REMAPPER	4
 #define SDE_MDP_VBIF_8_LEVEL_REMAPPER	8

rotator/sde_rotator_r3.c

@@ -3271,6 +3271,21 @@ static int sde_rotator_hw_rev_init(struct sde_hw_rotator *rot)
 				ARRAY_SIZE(sde_hw_rotator_v4_outpixfmts_sbuf);
 		rot->downscale_caps =
 			"LINEAR/1.5/2/4/8/16/32/64 TILE/1.5/2/4 TP10/1.5/2";
+	} else if (IS_SDE_MAJOR_MINOR_SAME(mdata->mdss_version,
+				SDE_MDP_HW_REV_630)) {
+		SDEROT_DBG("Sys cache inline rotation not supported\n");
+		set_bit(SDE_CAPS_PARTIALWR,  mdata->sde_caps_map);
+		set_bit(SDE_CAPS_HW_TIMESTAMP, mdata->sde_caps_map);
+		rot->inpixfmts[SDE_ROTATOR_MODE_OFFLINE] =
+				sde_hw_rotator_v4_inpixfmts;
+		rot->num_inpixfmt[SDE_ROTATOR_MODE_OFFLINE] =
+				ARRAY_SIZE(sde_hw_rotator_v4_inpixfmts);
+		rot->outpixfmts[SDE_ROTATOR_MODE_OFFLINE] =
+				sde_hw_rotator_v4_outpixfmts;
+		rot->num_outpixfmt[SDE_ROTATOR_MODE_OFFLINE] =
+				ARRAY_SIZE(sde_hw_rotator_v4_outpixfmts);
+		rot->downscale_caps =
+			"LINEAR/1.5/2/4/8/16/32/64 TILE/1.5/2/4 TP10/1.5/2";
 	} else {
 		rot->inpixfmts[SDE_ROTATOR_MODE_OFFLINE] =
 				sde_hw_rotator_v3_inpixfmts;