fw-api: CL 7944886 - update fw common interface files

Change-Id: I64450c65f6774070a4828f87b113ba1253d24b3a
WMI: add scan info for 6 GHz band
CRs-Fixed: 2262693

fw/wmi_services.h

@@ -406,6 +406,7 @@ typedef  enum  {
     WMI_SERVICE_WPA3_SAE_ROAM_SUPPORT = 221, /* Indicates FW supports WPA3 SAE roaming */
     WMI_SERVICE_WPA3_OWE_ROAM_SUPPORT = 222, /* Indicates FW supports WPA3 OWE roaming */
     WMI_SERVICE_AUDIO_AGGR = 223, /* Indicates FW supports audio frame aggregation */
+    WMI_SERVICE_6GHZ_SUPPORT = 224, /* Indicates FW supports 6GHZ (scan, connection and so on) */
 
     /******* ADD NEW SERVICES HERE *******/
 
@@ -416,7 +417,22 @@ typedef  enum  {
 #define WMI_SERVICE_BM_SIZE   ((WMI_MAX_SERVICE + sizeof(A_UINT32)- 1)/sizeof(A_UINT32))
 
 #define WMI_NUM_EXT_SERVICES (WMI_MAX_EXT_SERVICE - WMI_MAX_SERVICE)
+
+/*
+ * TEMPORARY WORKAROUND
+ * Virtually all branches of the target utilize an incorrect check on
+ * the value of WMI_SERVICE_EXT_BM_SIZE32, checking that
+ * WMI_SERVICE_EXT_BM_SIZE32 < 4, rather than WMI_SERVICE_EXT_BM_SIZE32 <= 4.
+ * Until all target branches are fixed, this check is being disabled
+ * by artificially setting WMI_SERVICE_EXT_BM_SIZE32 to 0, rather than
+ * the number of 4-byte words required for holding the WMI extension
+ * service flags.
+ */
+#if 0
 #define WMI_SERVICE_EXT_BM_SIZE32 ((WMI_NUM_EXT_SERVICES + 31) / 32)
+#else
+#define WMI_SERVICE_EXT_BM_SIZE32 0
+#endif
 
 #define WMI_SERVICE_ROAM_OFFLOAD WMI_SERVICE_ROAM_SCAN_OFFLOAD /* depreciated the name WMI_SERVICE_ROAM_OFFLOAD, but here to help compiling with old host driver */
 

fw/wmi_tlv_defs.h

@@ -1887,7 +1887,9 @@ WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_PLMREQ_STOP_CMDID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_mac_addr, bssid_list, WMITLV_SIZE_VAR) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, ie_data, WMITLV_SIZE_VAR)\
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_vendor_oui, vendor_oui, WMITLV_SIZE_VAR) \
-    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, phymode_list, WMITLV_SIZE_VAR)
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, phymode_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_hint_freq_short_ssid, hint_freq_short_ssid_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_hint_freq_bssid, hint_freq_bssid_list, WMITLV_SIZE_VAR)
 WMITLV_CREATE_PARAM_STRUC(WMI_START_SCAN_CMDID);
 
 /* Scan adaptive dwell mode configuration */

fw/wmi_unified.h

@@ -1945,6 +1945,7 @@ typedef enum {
 #define WMI_CHAN_FLAG_QUARTER_RATE  15  /* Indicates quarter rate channel */
 #define WMI_CHAN_FLAG_DFS_CFREQ2  16 /* Enable radar event reporting for sec80 in VHT80p80 */
 #define WMI_CHAN_FLAG_ALLOW_HE    17 /* HE (11ax) is allowed on this channel */
+#define WMI_CHAN_FLAG_PSC         18 /* Indicate it is a PSC (preferred scanning channel) */
 
 #define WMI_SET_CHANNEL_FLAG(pwmi_channel,flag) do { \
         (pwmi_channel)->info |=  (1 << flag);      \
@@ -3708,6 +3709,55 @@ typedef struct {
 #define WMI_SCAN_CHAN_GET_MODE(_c) ((_c) - 1)
 #define WMI_SCAN_CHAN_MODE_IS_SET(_c) (_c)
 
+typedef struct {
+    /*
+     * freq unit: MHz (upper 16bits -- value)
+     * flags (lower 16bits -- bitfield): valid for the freq short ssid
+     *     The flags bitfield contains a bitmask of WMI_SCAN_HINT_FLAG_ values.
+     */
+    A_UINT32 freq_flags;
+    /* per spec, only 4 bytes*/
+    A_UINT32 short_ssid;
+} wmi_hint_freq_short_ssid;
+
+/** following bssid mac address same as wmi_mac_addr
+ *  one example: freq -- 5980(0x175c), flags -- 0x1, mac -- 00:03:7f:12:34:56
+ *  freq_flags     will be: 0x175c0001
+ *  macaddr31to00 will be: 0x127f0300
+ *  macaddr47to32 will be: 0x00005634
+ */
+typedef struct {
+    /*
+     * freq unit: MHz (upper 16bits -- value)
+     * flags (lower 16bits -- bitfield): valid for the freq bssid
+     *     The flags bitfield contains a bitmask of WMI_SCAN_HINT_FLAG_ values.
+     */
+    A_UINT32 freq_flags;
+    /* legacy bssid addr, use same macro to convert: WMI_MAC_ADDR_TO_CHAR_ARRAY, WMI_CHAR_ARRAY_TO_MAC_ADDR */
+    wmi_mac_addr bssid;
+} wmi_hint_freq_bssid;
+
+/** macro to get freq and corresponding flags from wmi_hint_freq_short_ssid */
+#define WMI_GET_FREQ_FROM_HINT_FREQ_SHORT_SSID(pwmi_hint_freq_short_ssid_addr) ((((pwmi_hint_freq_short_ssid_addr)->freq_flags) >> 16) & 0xffff)
+#define WMI_GET_FLAGS_FROM_HINT_FREQ_SHORT_SSID(pwmi_hint_freq_short_ssid_addr) (((pwmi_hint_freq_short_ssid_addr)->freq_flags) & 0xffff)
+
+/** macro to set freq and corresponding flags in wmi_hint_freq_short_ssid */
+#define WMI_SET_FREQ_IN_HINT_FREQ_SHORT_SSID(freq, pwmi_hint_freq_short_ssid_addr) (((pwmi_hint_freq_short_ssid_addr)->freq_flags) |= ((freq) << 16))
+#define WMI_SET_FLAGS_IN_HINT_FREQ_SHORT_SSID(flags, pwmi_hint_freq_short_ssid_addr) (((pwmi_hint_freq_short_ssid_addr)->freq_flags) |= (flags))
+
+/** macro to get freq and corresponding flags from wmi_hint_freq_bssid */
+#define WMI_GET_FREQ_FROM_HINT_FREQ_BSSID(pwmi_hint_freq_bssid_addr) ((((pwmi_hint_freq_bssid_addr)->freq_flags) >> 16) & 0xffff)
+#define WMI_GET_FLAGS_FROM_HINT_FREQ_BSSID(pwmi_hint_freq_bssid_addr) (((pwmi_hint_freq_bssid_addr)->freq_flags) & 0xffff)
+
+/** macro to set freq and corresponding flags in wmi_hint_freq_bssid */
+#define WMI_SET_FREQ_IN_HINT_FREQ_BSSID(freq, pwmi_hint_freq_bssid_addr) (((pwmi_hint_freq_bssid_addr)->freq_flags) |= ((freq) << 16))
+#define WMI_SET_FLAGS_IN_HINT_FREQ_BSSID(flags, pwmi_hint_freq_bssid_addr) (((pwmi_hint_freq_bssid_addr)->freq_flags) |= (flags))
+
+/** other macro for 6GHZ, TU(time unit), 20TU normally it is 20ms */
+#define MAX_NUM_20TU_EACH_CH      4
+#define MAX_NUM_S_SSID_EACH_20TU  1
+#define MAX_NUM_BSSID_EACH_20TU   3
+
 /* prefix used by scan requestor ids on the host */
 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
 /* prefix used by scan request ids generated on the host */
@@ -3787,6 +3837,16 @@ typedef struct {
     A_UINT32 scan_ctrl_flags_ext;
     /** dwell time in msec on active 2G channels, if it's not zero */
     A_UINT32 dwell_time_active_2g;
+    /**
+     * dwell time in msec when 6 GHz channel (PSC or non-PSC) is marked
+     * as an active channel
+     */
+    A_UINT32 dwell_time_active_6ghz;
+    /**
+     * dwell time in msec when 6 GHz channel (PSC or non-PSC) is marked
+     * as a passive channel
+     */
+    A_UINT32 dwell_time_passive_6ghz;
 
 /**
  * TLV (tag length value) parameters follow the scan_cmd
@@ -3797,6 +3857,12 @@ typedef struct {
  *     A_UINT8 ie_data[ie_len];
  *     wmi_vendor_oui vendor_oui[num_vendor_oui];
  *     A_UINT8 phymode_list[0 or num_chan]; // see WMI_SCAN_CHAN_MODE macros
+ *     wmi_hint_freq_short_ssid hint_freq_short_ssid[num]; // the num can be calculated by TLV len
+ *     wmi_hint_freq_bssid hint_freq_bssid[num]; // the num can be calculated by TLV len
+ *     *** NOTE:
+ *     *** Use caution when using further TLVs, in case the additional
+ *     *** TLVs cause the message size to exceed the of the buffer to
+ *     *** hold the message.
  */
 } wmi_start_scan_cmd_fixed_param;
 
@@ -3894,10 +3960,30 @@ typedef enum {
 #define WMI_SCAN_DBS_POLICY_RESERVED            0x3
 #define WMI_SCAN_DBS_POLICY_MAX                 0x3
 
-/** Enable Reception of Public Action frame with this flag
- * (inside scan_ctrl_flags_ext field of wmi_start_scan_cmd_fixed_param)
+/* Enable Reception of Public Action frame with this flag */
+#define WMI_SCAN_FLAG_EXT_FILTER_PUBLIC_ACTION_FRAME  0x00000004
+
+/* Indicate to scan all PSC channel */
+#define WMI_SCAN_FLAG_EXT_6GHZ_SCAN_ALL_PSC_CH        0x00000008
+
+/* Indicate to scan all NON-PSC channel */
+#define WMI_SCAN_FLAG_EXT_6GHZ_SCAN_ALL_NON_PSC_CH    0x00000010
+
+/* Indicate to save scan result matching hint from scan client */
+#define WMI_SCAN_FLAG_EXT_6GHZ_MATCH_HINT             0x00000020
+
+/* Skip any ch on which no any RNR had been received */
+#define WMI_SCAN_FLAG_EXT_6GHZ_SKIP_NON_RNR_CH        0x00000040
+
+/* Indicate client hint req is high priority than fw rnr or FILS disc */
+#define WMI_SCAN_FLAG_EXT_6GHZ_CLIENT_HIGH_PRIORITY   0x00000080
+
+/**
+ * new 6 GHz flags per chan (short ssid or bssid) in struct
+ * wmi_hint_freq_short_ssid or wmi_hint_freq_bssid
  */
-#define WMI_SCAN_FLAG_EXT_FILTER_PUBLIC_ACTION_FRAME      0x4
+/* Indicate not to send probe req for short_ssid or bssid on that channel */
+#define WMI_SCAN_HINT_FLAG_SKIP_TX_PROBE_REQ    0x00000001
 
 typedef struct {
     A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_stop_scan_cmd_fixed_param */

fw/wmi_version.h

@@ -36,7 +36,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 714
+#define __WMI_REVISION_ 715
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work