fw-api: CL 3094881 - update fw common interface files

define WMI messages for PDEV_BSS_CHAN_INFO request and event

Change-Id: I35772aa95d0d081489b97d8ae3371a9fd696aed6
CRs-Fixed: 1107600

fw/wmi_services.h

@@ -193,6 +193,7 @@ typedef  enum  {
     WMI_SERVICE_8SS_TX_BFEE = 124, /* support for 8Ant Bfee */
     WMI_SERVICE_EXTENDED_NSS_SUPPORT=125, /* Extend NSS support for 80Mhz and 160Mhz */
     WMI_SERVICE_ACK_TIMEOUT=126, /* Support TX ack timeout configurations */
+    WMI_SERVICE_PDEV_BSS_CHANNEL_INFO_64 = 127, /* BSS channel info (freq, noise floor, rx clear, cycles 64-bit counters) event support */
 
 
     /******* ADD NEW SERVICES HERE UNTIL ALL VALUES UP TO 128 ARE USED *******/

fw/wmi_tlv_defs.h

@@ -834,6 +834,8 @@ typedef enum {
     WMITLV_TAG_STRUC_wmi_oem_indirect_data,
     WMITLV_TAG_STRUC_wmi_oem_dma_buf_release_fixed_param,
     WMITLV_TAG_STRUC_wmi_oem_dma_buf_release_entry,
+    WMITLV_TAG_STRUC_wmi_pdev_bss_chan_info_request_fixed_param,
+    WMITLV_TAG_STRUC_wmi_pdev_bss_chan_info_event_fixed_param,
 } WMITLV_TAG_ID;
 
 /*
@@ -1168,6 +1170,7 @@ typedef enum {
     OP(WMI_PDEV_DIV_GET_RSSI_ANTID_CMDID) \
     OP(WMI_THERM_THROT_SET_CONF_CMDID) \
     OP(WMI_OEM_DMA_RING_CFG_REQ_CMDID) \
+    OP(WMI_PDEV_BSS_CHAN_INFO_REQUEST_CMDID) \
     /* add new CMD_LIST elements above this line */
 
 
@@ -1354,6 +1357,7 @@ typedef enum {
     OP(WMI_PDEV_DIV_RSSI_ANTID_EVENTID) \
     OP(WMI_OEM_DMA_RING_CFG_RSP_EVENTID) \
     OP(WMI_OEM_DMA_BUF_RELEASE_EVENTID) \
+    OP(WMI_PDEV_BSS_CHAN_INFO_EVENTID) \
     /* add new EVT_LIST elements above this line */
 
 
@@ -2184,6 +2188,11 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_GET_TPC_CONFIG_CMDID);
 
 WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_DIV_GET_RSSI_ANTID_CMDID);
 
+#define WMITLV_TABLE_WMI_PDEV_BSS_CHAN_INFO_REQUEST_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_bss_chan_info_request_fixed_param,  wmi_pdev_bss_chan_info_request_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_BSS_CHAN_INFO_REQUEST_CMDID);
+
 /* VDEV Get Tx power Cmd */
 #define WMITLV_TABLE_WMI_VDEV_GET_TX_POWER_CMDID(id,op,buf,len) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_get_tx_power_cmd_fixed_param, wmi_vdev_get_tx_power_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
@@ -3468,6 +3477,11 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_TPC_CONFIG_EVENTID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_div_rssi_antid_event_fixed_param, wmi_pdev_div_rssi_antid_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
 WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_DIV_RSSI_ANTID_EVENTID);
 
+/* PDEV BSS CHAN info Event */
+#define WMITLV_TABLE_WMI_PDEV_BSS_CHAN_INFO_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_bss_chan_info_event_fixed_param, wmi_pdev_bss_chan_info_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_BSS_CHAN_INFO_EVENTID);
+
 /* VDEV Tx Power Event */
 #define WMITLV_TABLE_WMI_VDEV_GET_TX_POWER_EVENTID(id,op,buf,len) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_tx_power_event_fixed_param, wmi_vdev_get_tx_power_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)

fw/wmi_unified.h

@@ -368,6 +368,8 @@ typedef enum {
     WMI_PDEV_SET_DIVERSITY_GAIN_CMDID,
     /** Get chain RSSI and antena index command */
     WMI_PDEV_DIV_GET_RSSI_ANTID_CMDID,
+    /* get bss chan info */
+    WMI_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
 
     /* VDEV (virtual device) specific commands */
     /** vdev create */
@@ -1129,6 +1131,9 @@ typedef enum {
     /** Report chain RSSI and antenna index to host */
     WMI_PDEV_DIV_RSSI_ANTID_EVENTID,
 
+    /** provide noise floor and cycle counts for a channel */
+    WMI_PDEV_BSS_CHAN_INFO_EVENTID,
+
     /* VDEV specific events */
     /** VDEV started event in response to VDEV_START request */
     WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
@@ -4342,6 +4347,11 @@ typedef struct {
     wmi_mac_addr macaddr;
 } wmi_pdev_div_get_rssi_antid_fixed_param;
 
+typedef struct {
+    A_UINT32 tlv_header; /* WMITLV_TAG_STRUC_wmi_pdev_bss_chan_info_request_fixed_param */
+    A_UINT32 param;   /* 1 = read only, 2= read and clear */
+} wmi_pdev_bss_chan_info_request_fixed_param;
+
 #define WMI_FAST_DIVERSITY_BIT_OFFSET 0
 #define WMI_SLOW_DIVERSITY_BIT_OFFSET 1
 
@@ -4525,6 +4535,31 @@ typedef struct {
     wmi_mac_addr macaddr;
 } wmi_pdev_div_rssi_antid_event_fixed_param;
 
+typedef struct {
+    A_UINT32 tlv_header;                /* WMITLV_TAG_STRUC_wmi_pdev_bss_chan_info_event_fixed_param */
+    A_UINT32 freq;                      /* Units in MHz */
+    A_INT32 noise_floor;                /* units are dBm */
+
+    /* rx clear - how often the channel was unused */
+    A_UINT32 rx_clear_count_low;        /* low 31 bits of rx_clear cnt in 64bits format */
+    A_UINT32 rx_clear_count_high;       /* high 31 bits of rx_clear cnt in 64bits format */
+
+    /* cycle count - elapsed time during the measured period, in clock ticks */
+    A_UINT32 cycle_count_low;           /* low 31 bits of cycle cnt in 64bits format */
+    A_UINT32 cycle_count_high;          /* high 31 bits of cycle cnt in 64bits format */
+
+    /* tx cycle count - elapsed time spent in tx, in clock ticks */
+    A_UINT32 tx_cycle_count_low;        /* low 31 bits of tx_cycle cnt in 64bits format */
+    A_UINT32 tx_cycle_count_high;       /* high 31 bits of tx_cycle cnt in 64bits format */
+
+    /* rx cycle count - elapsed time spent in rx, in clock ticks */
+    A_UINT32 rx_cycle_count_low;        /* low 31 bits of rx_cycle cnt in 64bits format */
+    A_UINT32 rx_cycle_count_high;       /* high 31 bits of rx_cycle cnt in 64bits format */
+
+    A_UINT32 rx_bss_cycle_count_low;    /* low 31 bits of rx cycle cnt for my bss in 64bits format */
+    A_UINT32 rx_bss_cycle_count_high;   /* high 31 bits of rx_cycle cnt for my bss in 64bits format */
+} wmi_pdev_bss_chan_info_event_fixed_param;
+
 typedef struct {
     A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_pdev_l1ss_track_event_fixed_param  */
     A_UINT32 periodCnt;
@@ -19211,6 +19246,7 @@ static INLINE A_UINT8 *wmi_id_to_name(A_UINT32 wmi_command)
         WMI_RETURN_STRING(WMI_SET_SCAN_DBS_DUTY_CYCLE_CMDID);
         WMI_RETURN_STRING(WMI_THERM_THROT_SET_CONF_CMDID);
         WMI_RETURN_STRING(WMI_OEM_DMA_RING_CFG_REQ_CMDID);
+        WMI_RETURN_STRING(WMI_PDEV_BSS_CHAN_INFO_REQUEST_CMDID);
     }
 
     return "Invalid WMI cmd";

fw/wmi_version.h

@@ -36,7 +36,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 393
+#define __WMI_REVISION_ 394
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work