qcacmn: Add QCA vendor attributes for NDP setup

QCA vendor extension is used for NDP setup. This defines the new
attributes QCA_WLAN_VENDOR_ATTR_NDP_CSIA_CAPABILITIES and
QCA_WLAN_VENDOR_ATTR_NDP_GTK_REQUIRED to support GTKSA, IGTKSA,
and BIGTKSA for NDP setup.

Change-Id: Iddd9d0f88d1d5d66fd72dc158801ad16c14f39e2
CRs-Fixed: 3583158

os_if/linux/qca_vendor.h

@@ -5947,22 +5947,41 @@ enum qca_wlan_vendor_attr_rssi_monitoring {
  *     2:80 MHz,
  *     3:160 MHz
  * @QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_INFO: Array of channel/band width
- * @QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST: id after last valid attribute
- * @QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_MAX: max value of this enum type
  * @QCA_WLAN_VENDOR_ATTR_NDP_IPV6_ADDR: IPv6 address used by NDP, 16 bytes array
  * @QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PORT: Unsigned 16-bit value indicating
  * transport port used by NDP.
- * QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PROTOCOL: Unsigned 8-bit value indicating
+ * @QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PROTOCOL: Unsigned 8-bit value indicating
  * protocol used by NDP and assigned by the Internet Assigned Numbers Authority
  * as per: www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
- * QCA_WLAN_VENDOR_ATTR_PEER_NDPE_SUPPORT: Unsigned 8-bit value indicating if
+ * @QCA_WLAN_VENDOR_ATTR_PEER_NDPE_SUPPORT: Unsigned 8-bit value indicating if
  * NDP remote peer supports NAN NDPE. 1:support 0:not support
- * QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_ID: As per Wi-Fi Aware Specification v3.2
+ * @QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_ID: As per Wi-Fi Aware Specification v3.2
  * Service Id is the first 48 bits of the SHA-256 hash of the Service Name.
  * A lower-case representation of the Service Name shall be used to
  * calculate the Service ID.
  * Array of u8: length is 6 bytes
  * This attribute is used and optional for ndp indication.
+ * @QCA_WLAN_VENDOR_ATTR_NDP_CSIA_CAPABILITIES: Unsigned 8-bit value for Cipher
+ * Suite
+ * This attribute is used and optional in ndp request, ndp response, ndp
+ * indication, and ndp confirm.
+ * This attribute is used to indicate the Capabilities field of Cipher Suite
+ * Information attribute (CSIA) of NDP frames as defined in Wi-Fi Aware
+ * Specification v4.0, 9.5.21.2, Table 122.
+ * Firmware can accept or ignore any of the capability bits.
+ * @QCA_WLAN_VENDOR_ATTR_NDP_GTK_REQUIRED: Indicate if the GTK protection is
+ * required for NDP. NLA_FLAG attribute.
+ * This attribute can be used in ndp request, ndp response, ndp indication, and
+ * ndp confirm.
+ * GTK protection required is indicated in the NDPE attribute of NAN action
+ * frame (NAF) during NDP negotiation as defined in Wi-Fi Aware Specification
+ * v4.0, 9.5.16.2.
+ * If the device and peer supports GTKSA and if GTK protection required bit is
+ * set in NDPE IE, devices will share GTK to each other in SKDA of Data Path
+ * Security Confirm and Data Path Security Install frames of NDP negotiation to
+ * send and receive protected group addressed data frames from each other.
+ * @QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST: id after last valid attribute
+ * @QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_MAX: max value of this enum type
 */
 enum qca_wlan_vendor_attr_ndp_params {
 	QCA_WLAN_VENDOR_ATTR_NDP_PARAM_INVALID = 0,
@@ -5997,6 +6016,8 @@ enum qca_wlan_vendor_attr_ndp_params {
 	QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PROTOCOL = 29,
 	QCA_WLAN_VENDOR_ATTR_PEER_NDPE_SUPPORT = 30,
 	QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_ID = 31,
+	QCA_WLAN_VENDOR_ATTR_NDP_CSIA_CAPABILITIES = 32,
+	QCA_WLAN_VENDOR_ATTR_NDP_GTK_REQUIRED = 33,
 
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST,