qcacld-3.0: Drop action frames based on action id

Currently, host driver sets bitmap of allowed action frames to fw.
For a particular action category, there are certain action id
frames which are not processed. This causes host wakeup and leads
to power drain.

Set action id along with action category to fw for action frames
to be allowed to host driver.

Change-Id: Ifa0b40b290fcabb9ce5e48f69bd462aebb9017ac
CRs-Fixed: 2072123

components/pmo/core/src/wlan_pmo_static_config.c

@@ -344,6 +344,19 @@ void pmo_register_wow_default_patterns(struct wlan_objmgr_vdev *vdev)
 
 }
 
+/**
+ * set_action_id_drop_pattern_for_spec_mgmt() - Set action id of action
+ * frames for spectrum mgmt frames to be droppped in fw.
+ *
+ * @action_id_per_category: Pointer to action id bitmaps.
+ */
+static void set_action_id_drop_pattern_for_spec_mgmt(
+					uint32_t *action_id_per_category)
+{
+	action_id_per_category[PMO_MAC_ACTION_SPECTRUM_MGMT]
+				= DROP_SPEC_MGMT_ACTION_FRAME_BITMAP;
+}
+
 void pmo_register_action_frame_patterns(struct wlan_objmgr_vdev *vdev)
 {
 
@@ -363,6 +376,8 @@ void pmo_register_action_frame_patterns(struct wlan_objmgr_vdev *vdev)
 	cmd.action_category_map[i++] = ALLOWED_ACTION_FRAMES_BITMAP6;
 	cmd.action_category_map[i++] = ALLOWED_ACTION_FRAMES_BITMAP7;
 
+	set_action_id_drop_pattern_for_spec_mgmt(cmd.action_per_category);
+
 	for (i = 0; i < PMO_SUPPORTED_ACTION_CATE_ELE_LIST; i++) {
 		if (i < ALLOWED_ACTION_FRAME_MAP_WORDS)
 			pmo_debug("%s: %d action Wakeup pattern 0x%x in fw",
@@ -371,6 +386,9 @@ void pmo_register_action_frame_patterns(struct wlan_objmgr_vdev *vdev)
 			cmd.action_category_map[i] = 0;
 	}
 
+	pmo_debug("Spectrum mgmt action id drop bitmap: 0x%x",
+			cmd.action_per_category[PMO_MAC_ACTION_SPECTRUM_MGMT]);
+
 	/*  config action frame patterns */
 	status = pmo_tgt_send_action_frame_pattern_req(vdev, &cmd);
 	if (status != QDF_STATUS_SUCCESS)

components/pmo/dispatcher/inc/wlan_pmo_wow_public_struct.h

@@ -60,6 +60,8 @@
 #define PMO_MAC_ACTION_VHT            21
 #define PMO_MAC_ACTION_MAX            256
 
+#define PMO_MAC_ACTION_MEASURE_REQUEST_ID      0
+#define PMO_MAC_ACTION_TPC_REQUEST_ID          2
 /*
  * ALLOWED_ACTION_FRAMES_BITMAP
  *
@@ -112,6 +114,30 @@
 
 #define ALLOWED_ACTION_FRAME_MAP_WORDS (PMO_MAC_ACTION_MAX / 32)
 
+#ifndef ANI_SUPPORT_11H
+/*
+ * DROP_SPEC_MGMT_ACTION_FRAME_BITMAP
+ *
+ * Bitmask is based on the below. The frames with 1's
+ * set to their corresponding bit can be dropped in FW.
+ *
+ * ----------------------------------+-----+------+
+ *         Type                      | Bit | Drop |
+ * ----------------------------------+-----+------+
+ * SIR_MAC_ACTION_MEASURE_REQUEST_ID    0     1
+ * SIR_MAC_ACTION_TPC_REQUEST_ID        1     1
+ * ----------------------------------+-----+------+
+ */
+#define DROP_SPEC_MGMT_ACTION_FRAME_BITMAP \
+		((1 << PMO_MAC_ACTION_MEASURE_REQUEST_ID) |\
+		 (1 << PMO_MAC_ACTION_TPC_REQUEST_ID))
+#else
+/*
+ * If 11H support is defined, dont drop the above action category of
+ * spectrum mgmt action frames as host driver is processing them.
+ */
+#define DROP_SPEC_MGMT_ACTION_FRAME_BITMAP 0
+#endif /* ANI_SUPPORT_11H */
 
 #define PMO_SUPPORTED_ACTION_CATE           256
 #define PMO_SUPPORTED_ACTION_CATE_ELE_LIST (PMO_SUPPORTED_ACTION_CATE/32)
@@ -122,11 +148,13 @@
  * @operation: 0 reset to fw default, 1 set the bits,
  *    2 add the setting bits, 3 delete the setting bits
  * @action_category_map: bit mapping.
+ * @action_per_category: bitmap per action category
  */
 struct pmo_action_wakeup_set_params {
 	uint32_t vdev_id;
 	uint32_t operation;
 	uint32_t action_category_map[PMO_SUPPORTED_ACTION_CATE_ELE_LIST];
+	uint32_t action_per_category[PMO_SUPPORTED_ACTION_CATE];
 };
 
 /**