qcacmn: Vendor attributes for configuring LDPC, TX STBC, RX STBC

Defines the attributes in SET(GET)_WIFI_CONFIGURATION to dynamically
configure capabilities: LDPC, TX STBC, RX STBC.

Change-Id: I9d38f436cb6a8ee5a0cf074c22bccb98ffd46df4
CRs-Fixed: 2689416

os_if/linux/qca_vendor.h

@@ -4318,6 +4318,42 @@ enum qca_wlan_vendor_attr_config {
 	 */
 	QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MSDU_AGGREGATION = 66,
 
+	/* 8-bit unsigned value. This attribute is used to dynamically
+	 * enable/disable the LDPC capability of the device. When configured in
+	 * the disconnected state, the updated configuration will be considered
+	 * for the immediately following connection attempt. If this
+	 * configuration is modified while the device is in the connected state,
+	 * the LDPC TX will be updated with this configuration immediately,
+	 * while the LDPC RX configuration update will take place starting from
+	 * the subsequent association attempt.
+	 * 1-Enable, 0-Disable.
+	 */
+	QCA_WLAN_VENDOR_ATTR_CONFIG_LDPC = 67,
+
+	/* 8-bit unsigned value. This attribute is used to dynamically
+	 * enable/disable the TX STBC capability of the device. When configured
+	 * in the disconnected state, the updated configuration will be
+	 * considered for the immediately following connection attempt. If the
+	 * connection is formed with TX STBC enabled and if this configuration
+	 * is disabled during that association, the TX will be impacted
+	 * immediately. Further connection attempts will disable TX STBC.
+	 * However, enabling the TX STBC for a connected session with disabled
+	 * capability is not allowed and will fail.
+	 * 1-Enable, 0-Disable.
+	 */
+	QCA_WLAN_VENDOR_ATTR_CONFIG_TX_STBC = 68,
+
+	/* 8-bit unsigned value. This attribute is used to dynamically
+	 * enable/disable the RX STBC capability of the device. When configured
+	 * in the disconnected state, the updated configuration will be
+	 * considered for the immediately following connection attempt. If the
+	 * configuration is modified in the connected state, there will be no
+	 * impact for the current association, but further connection attempts
+	 * will use the updated configuration.
+	 * 1-Enable, 0-Disable.
+	 */
+	QCA_WLAN_VENDOR_ATTR_CONFIG_RX_STBC = 69,
+
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
 	QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =