qcacld-3.0: Add phy regulatory frequency range check

If phy regulatory capability doesn't support high or low
frequency indicated by MACRO such as HIGH_5GHZ_FREQ,
LOW_5GHZ_FREQ, we should not hard code to the MACRO.
The change adds new mlme API wlan_mlme_get_phy_max_freq_range
to get phy regulatory ranges from target info.

Change-Id: I95f48296ca093c20b1391d7657204eecfb418908
CRs-Fixed: 3376402

components/mlme/dispatcher/inc/wlan_mlme_api.h

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for
  * any purpose with or without fee is hereby granted, provided that the
@@ -3661,6 +3661,23 @@ QDF_STATUS mlme_clear_mcs_rate(struct wlan_objmgr_vdev *vdev);
  */
 bool wlan_mlme_is_sta_mon_conc_supported(struct wlan_objmgr_psoc *psoc);
 
+/**
+ * wlan_mlme_get_phy_max_freq_range() - Get phy supported max channel
+ * frequency range
+ * @psoc: psoc for country information
+ * @low_2ghz_chan: 2.4 GHz low channel frequency
+ * @high_2ghz_chan: 2.4 GHz high channel frequency
+ * @low_5ghz_chan: 5 GHz low channel frequency
+ * @high_5ghz_chan: 5 GHz high channel frequency
+ *
+ * Return: QDF status
+ */
+QDF_STATUS wlan_mlme_get_phy_max_freq_range(struct wlan_objmgr_psoc *psoc,
+					    uint32_t *low_2ghz_chan,
+					    uint32_t *high_2ghz_chan,
+					    uint32_t *low_5ghz_chan,
+					    uint32_t *high_5ghz_chan);
+
 #ifdef FEATURE_WDS
 /**
  * wlan_mlme_get_wds_mode() - Check wds mode supported

components/mlme/dispatcher/inc/wlan_mlme_ucfg_api.h

@@ -138,6 +138,31 @@ uint8_t ucfg_get_tx_power(struct wlan_objmgr_psoc *psoc, uint8_t band)
 	return wlan_mlme_get_tx_power(psoc, band);
 }
 
+/**
+ * ucfg_mlme_get_phy_max_freq_range() - Get phy supported max channel
+ * frequency range
+ * @psoc: psoc for country information
+ * @low_2ghz_chan: 2.4 GHz low channel frequency
+ * @high_2ghz_chan: 2.4 GHz high channel frequency
+ * @low_5ghz_chan: 5 GHz low channel frequency
+ * @high_5ghz_chan: 5 GHz high channel frequency
+ *
+ * Return: QDF status
+ */
+static inline
+QDF_STATUS ucfg_mlme_get_phy_max_freq_range(struct wlan_objmgr_psoc *psoc,
+					    uint32_t *low_2ghz_chan,
+					    uint32_t *high_2ghz_chan,
+					    uint32_t *low_5ghz_chan,
+					    uint32_t *high_5ghz_chan)
+{
+	return wlan_mlme_get_phy_max_freq_range(psoc,
+						low_2ghz_chan,
+						high_2ghz_chan,
+						low_5ghz_chan,
+						high_5ghz_chan);
+}
+
 /**
  * ucfg_mlme_get_ht_cap_info() - Get the HT cap info config
  * @psoc: pointer to psoc object

components/mlme/dispatcher/src/wlan_mlme_api.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for
  * any purpose with or without fee is hereby granted, provided that the
@@ -34,6 +34,7 @@
 #include <../../core/src/wlan_cm_vdev_api.h>
 #include "wlan_psoc_mlme_api.h"
 #include "wlan_action_oui_main.h"
+#include "target_if.h"
 
 /* quota in milliseconds */
 #define MCC_DUTY_CYCLE 70
@@ -5948,6 +5949,86 @@ bool mlme_get_user_ps(struct wlan_objmgr_psoc *psoc, uint8_t vdev_id)
 	return usr_ps_enable;
 }
 
+QDF_STATUS wlan_mlme_get_phy_max_freq_range(struct wlan_objmgr_psoc *psoc,
+					    uint32_t *low_2ghz_chan,
+					    uint32_t *high_2ghz_chan,
+					    uint32_t *low_5ghz_chan,
+					    uint32_t *high_5ghz_chan)
+{
+	uint32_t i;
+	uint32_t reg_low_2ghz_chan;
+	uint32_t reg_high_2ghz_chan;
+	uint32_t reg_low_5ghz_chan;
+	uint32_t reg_high_5ghz_chan;
+	struct target_psoc_info *info;
+	struct wlan_psoc_host_mac_phy_caps *mac_phy_cap;
+	struct wlan_psoc_host_hal_reg_cap_ext *reg_cap_ext;
+
+	info = wlan_psoc_get_tgt_if_handle(psoc);
+	if (!info) {
+		mlme_legacy_err("target_psoc_info is null");
+		return QDF_STATUS_E_FAILURE;
+	}
+	mac_phy_cap = info->info.mac_phy_cap;
+	reg_cap_ext = &mac_phy_cap->reg_cap_ext;
+	reg_low_2ghz_chan = reg_cap_ext->low_2ghz_chan;
+	reg_high_2ghz_chan = reg_cap_ext->high_2ghz_chan;
+	reg_low_5ghz_chan = reg_cap_ext->low_5ghz_chan;
+	reg_high_5ghz_chan = reg_cap_ext->high_5ghz_chan;
+	for (i = 1; i < PSOC_MAX_MAC_PHY_CAP; i++) {
+		mac_phy_cap = &info->info.mac_phy_cap[i];
+		reg_cap_ext = &mac_phy_cap->reg_cap_ext;
+
+		if (reg_cap_ext->low_2ghz_chan) {
+			reg_low_2ghz_chan = reg_low_2ghz_chan ?
+				QDF_MIN(reg_cap_ext->low_2ghz_chan,
+					reg_low_2ghz_chan) :
+				reg_cap_ext->low_2ghz_chan;
+		}
+		if (reg_cap_ext->high_2ghz_chan) {
+			reg_high_2ghz_chan = reg_high_2ghz_chan ?
+				QDF_MAX(reg_cap_ext->high_2ghz_chan,
+					reg_high_2ghz_chan) :
+				reg_cap_ext->high_2ghz_chan;
+		}
+		if (reg_cap_ext->low_5ghz_chan) {
+			reg_low_5ghz_chan = reg_low_5ghz_chan ?
+				QDF_MIN(reg_cap_ext->low_5ghz_chan,
+					reg_low_5ghz_chan) :
+				reg_cap_ext->low_5ghz_chan;
+		}
+		if (reg_cap_ext->high_5ghz_chan) {
+			reg_high_5ghz_chan = reg_high_5ghz_chan ?
+				QDF_MAX(reg_cap_ext->high_5ghz_chan,
+					reg_high_5ghz_chan) :
+				reg_cap_ext->high_5ghz_chan;
+		}
+	}
+	/* For old hw, no reg_cap_ext reported from service ready ext,
+	 * fill the low/high with default of regulatory.
+	 */
+	if (!reg_low_2ghz_chan && !reg_high_2ghz_chan &&
+	    !reg_low_5ghz_chan && !reg_high_5ghz_chan) {
+		mlme_legacy_debug("no reg_cap_ext in mac_phy_cap");
+		reg_low_2ghz_chan = TWOG_STARTING_FREQ - 10;
+		reg_high_2ghz_chan = TWOG_CHAN_14_IN_MHZ + 10;
+		reg_low_5ghz_chan = FIVEG_STARTING_FREQ - 10;
+		reg_high_5ghz_chan = SIXG_CHAN_233_IN_MHZ + 10;
+	}
+	if (!wlan_reg_is_6ghz_supported(psoc)) {
+		mlme_legacy_debug("disabling 6ghz channels");
+		reg_high_5ghz_chan = FIVEG_CHAN_177_IN_MHZ + 10;
+	}
+	mlme_legacy_debug("%d %d %d %d", reg_low_2ghz_chan, reg_high_2ghz_chan,
+			  reg_low_5ghz_chan, reg_high_5ghz_chan);
+	*low_2ghz_chan = reg_low_2ghz_chan;
+	*high_2ghz_chan = reg_high_2ghz_chan;
+	*low_5ghz_chan = reg_low_5ghz_chan;
+	*high_5ghz_chan = reg_high_5ghz_chan;
+
+	return QDF_STATUS_SUCCESS;
+}
+
 #ifdef WLAN_FEATURE_P2P_P2P_STA
 bool
 wlan_mlme_get_p2p_p2p_conc_support(struct wlan_objmgr_psoc *psoc)

core/hdd/src/wlan_hdd_object_manager.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2017-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for
  * any purpose with or without fee is hereby granted, provided that the
@@ -28,18 +28,6 @@
 #include <target_if.h>
 #include <os_if_spectral_netlink.h>
 
-#define LOW_2GHZ_FREQ 2312
-#define HIGH_2GHZ_FREQ 2732
-#define LOW_5GHZ_FREQ  4912
-
-#ifdef CONFIG_BAND_6GHZ
-#define HIGH_5GHZ_FREQ 7200
-#else
-#define HIGH_5GHZ_FREQ 5920
-#endif
-
-#define HIGH_5GHZ_FREQ_NO_6GHZ 5920
-
 static void hdd_init_pdev_os_priv(struct hdd_context *hdd_ctx,
 	struct pdev_osif_priv *os_priv)
 {
@@ -153,6 +141,10 @@ int hdd_objmgr_create_and_store_pdev(struct hdd_context *hdd_ctx)
 	struct wlan_objmgr_pdev *pdev;
 	struct pdev_osif_priv *priv;
 	struct wlan_psoc_host_hal_reg_capabilities_ext *reg_cap_ptr;
+	uint32_t low_2ghz_chan = 0;
+	uint32_t high_2ghz_chan = 0;
+	uint32_t low_5ghz_chan = 0;
+	uint32_t high_5ghz_chan = 0;
 
 	if (!psoc) {
 		hdd_err("Psoc NULL");
@@ -169,17 +161,17 @@ int hdd_objmgr_create_and_store_pdev(struct hdd_context *hdd_ctx)
 		status = QDF_STATUS_E_INVAL;
 		goto free_priv;
 	}
+	ucfg_mlme_get_phy_max_freq_range(psoc, &low_2ghz_chan,
+					 &high_2ghz_chan, &low_5ghz_chan,
+					 &high_5ghz_chan);
 	reg_cap_ptr->phy_id = 0;
-	reg_cap_ptr->low_2ghz_chan = LOW_2GHZ_FREQ;
+	reg_cap_ptr->low_2ghz_chan = low_2ghz_chan;
-	reg_cap_ptr->high_2ghz_chan = HIGH_2GHZ_FREQ;
+	reg_cap_ptr->high_2ghz_chan = high_2ghz_chan;
-	reg_cap_ptr->low_5ghz_chan = LOW_5GHZ_FREQ;
+	reg_cap_ptr->low_5ghz_chan = low_5ghz_chan;
-	reg_cap_ptr->high_5ghz_chan = HIGH_5GHZ_FREQ;
+	reg_cap_ptr->high_5ghz_chan = high_5ghz_chan;
-
+	hdd_debug("pdev freq range %d %d %d %d", reg_cap_ptr->low_2ghz_chan,
-	if (!wlan_reg_is_6ghz_supported(psoc)) {
+		  reg_cap_ptr->high_2ghz_chan, reg_cap_ptr->low_5ghz_chan,
-		hdd_debug("disabling 6ghz channels");
+		  reg_cap_ptr->high_5ghz_chan);
-		reg_cap_ptr->high_5ghz_chan = HIGH_5GHZ_FREQ_NO_6GHZ;
-	}
-
 	priv->osif_check_netdev_state = hdd_check_internal_netdev_state;
 	pdev = wlan_objmgr_pdev_obj_create(psoc, priv);
 	if (!pdev) {