qcacld-3.0: Refine mlme sta configurations

Define mlme sta configures based on converged cfg component, add APIs to get and set mlme sta configurations. Change-Id: I1a03037081ebe27760d23405adc3cc9042ba7698 CRs-Fixed: 2312002
2018-09-10 13:51:37 +08:00
--- a/components/mlme/dispatcher/inc/cfg_mlme_sta.h
+++ b/components/mlme/dispatcher/inc/cfg_mlme_sta.h
@@ -0,0 +1,395 @@
+/*
+ * Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/**
+ * DOC: This file contains configuration definitions for MLME STA.
+ */
+
+#ifndef CFG_MLME_STA_H__
+#define CFG_MLME_STA_H__
+
+#include "wlan_mlme_public_struct.h"
+
+/*
+ * <ini>
+ * gStaKeepAlivePeriod - Sends NULL frame to AP periodically in
+ * seconds to notify STA's existence
+ * @Min: 0
+ * @Max: 1000
+ * @Default: 60
+ *
+ * This ini is used to send default NULL frame to AP
+ *
+ * Related: None
+ *
+ * Supported Feature: STA
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_INFRA_STA_KEEP_ALIVE_PERIOD CFG_INI_UINT( \
+	"gStaKeepAlivePeriod", \
+	0, \
+	1000, \
+	60, \
+	CFG_VALUE_OR_DEFAULT, \
+	"send default NULL frame to AP")
+
+/*
+ * <ini>
+ * tgt_gtx_usr_cfg - target gtx user config
+ * @Min: 0
+ * @Max: 32
+ * @Default: 32
+ *
+ * This ini is used to set target gtx user config.
+ *
+ * Related: None
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_TGT_GTX_USR_CFG CFG_INI_UINT( \
+	"tgt_gtx_usr_cfg", \
+	0, \
+	32, \
+	32, \
+	CFG_VALUE_OR_DEFAULT, \
+	"target gtx user config")
+
+/*
+ * <ini>
+ * pmkidModes - Enable PMKID modes
+ * This INI is used to enable PMKID feature options
+ * @Min: 0
+ * @Max: 3
+ * @Default: 3
+ *
+ * Related: None
+ *
+ * Supported Feature: Scan
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMKID_MODES CFG_INI_UINT( \
+	"pmkidModes", \
+	0, \
+	3, \
+	3, \
+	CFG_VALUE_OR_DEFAULT, \
+	"PMKID feature options")
+
+/*
+ * <ini>
+ * gIgnorePeerErpInfo - Ignore peer information
+ * @Min: 0
+ * @Max: 1
+ * @Default: 0
+ *
+ * This ini is used to ignore default peer info
+ *
+ * Related: None
+ *
+ * Supported Feature: STA
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_IGNORE_PEER_ERP_INFO CFG_INI_BOOL( \
+	"gIgnorePeerErpInfo", \
+	0, \
+	"ignore default peer info")
+
+/*
+ * <ini>
+ * gStaPrefer80MHzOver160MHz - set sta preference to connect in 80HZ/160HZ
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * This ini is used to set sta preference to connect in 80HZ/160HZ
+ *
+ * 0 - Connects in 160MHz 1x1 when AP is 160MHz 2x2
+ * 1 - Connects in 80MHz 2x2 when AP is 160MHz 2x2
+ *
+ * Related: NA
+ *
+ * Supported Feature: 11AC
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_STA_PREFER_80MHZ_OVER_160MHZ CFG_INI_BOOL( \
+	"gStaPrefer80MHzOver160MHz", \
+	1, \
+	"Sta preference to connect in 80HZ/160HZ")
+
+/*
+ * <ini>
+ * gEnable5gEBT - Enables/disables 5G early beacon termination. When enabled
+ *                 terminate the reception of beacon if the TIM element is
+ *                 clear for the power saving
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * This ini is used to set default 5G early beacon termination
+ *
+ * Related: None
+ *
+ * Supported Feature: STA
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_PPS_ENABLE_5G_EBT CFG_INI_BOOL( \
+	"gEnable5gEBT", \
+	1, \
+	"5G early beacon termination")
+
+/*
+ * <ini>
+ * gSendDeauthBeforeCon - Send deauth before connection or not
+ * @Min: 0
+ * @Max: 1
+ * @Default: 0
+ *
+ * This ini is used to set whether send deauth before connection or
+ * not. If last disconnection was due to HB failure and we reconnect
+ * to same AP next time, send deauth before starting connection.
+ *
+ * Related: None
+ *
+ * Supported Feature: STA
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_ENABLE_DEAUTH_BEFORE_CONNECTION CFG_INI_BOOL( \
+	"gSendDeauthBeforeCon", \
+	0, \
+	"send deauth before connection")
+
+/*
+ * <ini>
+ * CFG_DOT11P_MODE - 802.11p mode
+ * @Min: CFG_11P_DISABLED
+ * @Max: CFG_11P_CONCURRENT
+ * @Default: CFG_11P_DISABLED
+ *
+ * This ini used to set 802.11p mode.
+ *
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_DOT11P_MODE CFG_INI_UINT( \
+	"gDot11PMode", \
+	CFG_11P_DISABLED, \
+	CFG_11P_CONCURRENT, \
+	CFG_11P_DISABLED, \
+	CFG_VALUE_OR_DEFAULT, \
+	"802.11p mode")
+
+/*
+ * <ini>
+ * gEnable_go_cts2self_for_sta - Indicate firmware to stop NOA and
+ * start using cts2self
+ * @Min: 0
+ * @Max: 1
+ * @Default: 0
+ *
+ * When gEnable_go_cts2self_for_sta is enabled then if a legacy
+ * client connects to P2P GO, Host will send a WMI VDEV command
+ * to FW to stop using NOA for P2P GO
+ * and start using CTS2SELF.
+ *
+ *
+ * Supported Feature: P2P
+ *
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_ENABLE_GO_CTS2SELF_FOR_STA CFG_INI_BOOL( \
+	"gEnable_go_cts2self_for_sta", \
+	0, \
+	"firmware to stop NOA and start using cts2self")
+
+/*
+ * <ini>
+ * g_qcn_ie_support - QCN IE support
+ * @Min: 0 (disabled)
+ * @Max: 1 (enabled)
+ * @Default: 1 (enabled)
+ *
+ * This config item is used to support QCN IE in probe/assoc/reassoc request
+ * for STA mode. QCN IE support is not added for SAP mode.
+ *
+ * Related: N/A
+ *
+ * Supported Feature: N/A
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_QCN_IE_SUPPORT CFG_INI_BOOL( \
+	"g_qcn_ie_support", \
+	1, \
+	"QCN IE support")
+
+/*
+ * <ini>
+ * g_fils_max_chan_guard_time - Set maximum channel guard time(ms)
+ * @Min: 0
+ * @Max: 10
+ * @Default: 0
+ *
+ * This ini is used to set maximum channel guard time in milliseconds.
+ *
+ * Related: None
+ *
+ * Supported Feature: FILS
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_FILS_MAX_CHAN_GUARD_TIME CFG_INI_UINT( \
+	"g_fils_max_chan_guard_time", \
+	0, \
+	10, \
+	0, \
+	CFG_VALUE_OR_DEFAULT, \
+	"Set maximum channel guard time")
+
+/*
+ * <ini>
+ * force_rsne_override - force rsnie override from user
+ * @Min: 0
+ * @Max: 1
+ * @Default: 0
+ *
+ * This ini is used to enable/disable test mode to force rsne override used in
+ * security enhancement test cases to pass the RSNIE sent by user in
+ * assoc request.
+ *
+ * Related: None
+ *
+ * Supported Feature: STA
+ *
+ * Usage: internal
+ *
+ * </ini>
+ */
+#define CFG_FORCE_RSNE_OVERRIDE CFG_INI_BOOL( \
+	"force_rsne_override", \
+	0, \
+	"Set obss active dwelltime")
+
+/*
+ * <ini>
+ * SingleTIDRC - Set replay counter for all TID's
+ * @Min: 0       Separate replay counter for all TID
+ * @Max: 1       Single replay counter for all TID
+ * @Default: 1
+ *
+ * This ini is used to set replay counter for all TID's
+ *
+ * Related: None.
+ *
+ * Supported Feature: WMM
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_SINGLE_TID_RC CFG_INI_BOOL( \
+	"SingleTIDRC", \
+	1, \
+	"replay counter for all TID")
+
+/*
+ * wait_cnf_timeout - Wait assoc cnf timeout
+ * @Min: 10
+ * @Max: 3000
+ * @Default: 1000
+ *
+ * This is internal configure for waiting assoc cnf timeout
+ *
+ * Related: None
+ *
+ * Usage: Internal
+ *
+ */
+#define CFG_WT_CNF_TIMEOUT CFG_UINT( \
+	"wait_cnf_timeout", \
+	10, \
+	3000, \
+	1000, \
+	CFG_VALUE_OR_DEFAULT, \
+	"Wait confirm timeout")
+
+/*
+ * current_rssi - current rssi
+ * @Min: 0
+ * @Max: 127
+ * @Default: 0
+ *
+ * This is internal configure for current rssi
+ *
+ * Related: None
+ *
+ * Usage: Internal
+ *
+ */
+#define CFG_CURRENT_RSSI CFG_UINT( \
+	"current_rssi", \
+	0, \
+	127, \
+	0, \
+	CFG_VALUE_OR_DEFAULT, \
+	"Current RSSI")
+
+#define CFG_STA_ALL \
+	CFG(CFG_INFRA_STA_KEEP_ALIVE_PERIOD) \
+	CFG(CFG_TGT_GTX_USR_CFG) \
+	CFG(CFG_PMKID_MODES) \
+	CFG(CFG_IGNORE_PEER_ERP_INFO) \
+	CFG(CFG_STA_PREFER_80MHZ_OVER_160MHZ) \
+	CFG(CFG_PPS_ENABLE_5G_EBT) \
+	CFG(CFG_ENABLE_DEAUTH_BEFORE_CONNECTION) \
+	CFG(CFG_DOT11P_MODE) \
+	CFG(CFG_ENABLE_GO_CTS2SELF_FOR_STA) \
+	CFG(CFG_QCN_IE_SUPPORT) \
+	CFG(CFG_FILS_MAX_CHAN_GUARD_TIME) \
+	CFG(CFG_FORCE_RSNE_OVERRIDE) \
+	CFG(CFG_SINGLE_TID_RC) \
+	CFG(CFG_WT_CNF_TIMEOUT) \
+	CFG(CFG_CURRENT_RSSI)
+
+#endif /* CFG_MLME_STA_H__ */