samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

qcacmn: Add additional roam triggers to qca_vendor_roam_triggers

Browse Source 
Introduce QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS
that represents the triggers for which the scan scheme from
enum qca_roam_scan_scheme has to be applied.

Change-Id: I9d620a0ada16093042befaf8ae2e80437369c256
CRs-Fixed: 2785260
This commit is contained in:
Pragaspathi Thilagaraj
2020-09-25 01:30:29 +05:30
committed by snandini
parent a438cb3a4a
commit 3ffa89227c
1 changed files with 32 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

33
os_if/linux/qca_vendor.h
View File

@@ -2775,6 +2775,19 @@ enum qca_vendor_attr_scan_freq_list_scheme {
* when BTM Request frame is received from the connected AP.
* @QCA_ROAM_TRIGGER_REASON_BSS_LOAD: Set if the roam has to be triggered
* when the channel utilization is goes above the configured threshold.
* @QCA_ROAM_TRIGGER_REASON_USER_TRIGGER: Set if the roam has to be triggered
* based on the request from the user (space).
* @QCA_ROAM_TRIGGER_REASON_DEAUTH: Set if the roam has to be triggered when
* device receives Deauthentication/Disassociation frame from connected
* AP.
* @QCA_ROAM_TRIGGER_REASON_IDLE: Set if the roam has to be triggered when the
* DUT is in idle state (no tx/rx) and suspend mode, if the current RSSI
* is determined to be a poor one.
* @QCA_ROAM_TRIGGER_REASON_TX_FAILURES: Set if the roam has to be triggered
* based on continuous TX Data Frame failures to the connected AP.
* @QCA_ROAM_TRIGGER_REASON_EXTERNAL_SCAN: Set if the roam has to be triggered
* based on the scan results obtained from an external scan (not
* triggered to aim roaming)
*
* Set the corresponding roam trigger reason bit to consider it for roam
* trigger.
@@ -2790,6 +2803,11 @@ enum qca_vendor_roam_triggers {
QCA_ROAM_TRIGGER_REASON_DENSE = 1 << 5,
QCA_ROAM_TRIGGER_REASON_BTM = 1 << 6,
QCA_ROAM_TRIGGER_REASON_BSS_LOAD = 1 << 7,
QCA_ROAM_TRIGGER_REASON_USER_TRIGGER = 1 << 8,
QCA_ROAM_TRIGGER_REASON_DEAUTH = 1 << 9,
QCA_ROAM_TRIGGER_REASON_IDLE = 1 << 10,
QCA_ROAM_TRIGGER_REASON_TX_FAILURES = 1 << 11,
QCA_ROAM_TRIGGER_REASON_EXTERNAL_SCAN = 1 << 12,
};
/**
@@ -2965,6 +2983,19 @@ enum qca_vendor_attr_roam_candidate_selection_criteria {
* user triggered reason code to be sent to the AP in response to AP's
* request to trigger the roam if the roaming cannot be triggered.
* Applies to all the scenarios of AP assisted roaming (e.g., BTM).
*
* @QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS: Unsigned 32-bit value.
* Carries a bitmap of the roam triggers specified in
* enum qca_vendor_roam_triggers.
* Represents the roam triggers for which the specific scan scheme from
* enum qca_roam_scan_scheme has to be applied.
* It's an optional attribute. If this attribute is not configured, but
* QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME is specified, then the scan scheme
* specified through QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME is applicable for
* all the roams.
* If both QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME and
* QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS are not specified, the
* driver shall proceed with the default behavior.
*/
enum qca_vendor_attr_roam_control {
QCA_ATTR_ROAM_CONTROL_ENABLE = 1,
@@ -2979,7 +3010,7 @@ enum qca_vendor_attr_roam_control {
QCA_ATTR_ROAM_CONTROL_CONNECTED_RSSI_THRESHOLD = 10,
QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD = 11,
QCA_ATTR_ROAM_CONTROL_USER_REASON = 12,
/* 13 - 20 : Reserved for QCA */
QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS = 13,
/* keep last */
QCA_ATTR_ROAM_CONTROL_AFTER_LAST,