cnss2: Add CONFIG_DISABLE_CNSS_SRAM_DUMP

It costs 4M when loading cnss2, if device id is QCA6490 and enabled
CONFIG_CNSS2_DEBUG. Which is big memory consumption for low rate issue
debugging. So add CONFIG_DISABLE_CNSS_SRAM_DUMP to disable sram_dump.

Change-Id: Iacf338a3cc8f1583e16034a9873029a450fd254a
CRs-Fixed: 3441274

Kbuild

@@ -56,6 +56,10 @@ ifeq ($(CONFIG_FREE_M3_BLOB_MEM),y)
 KBUILD_CPPFLAGS += -DCONFIG_FREE_M3_BLOB_MEM
 endif
 
+ifeq ($(CONFIG_DISABLE_CNSS_SRAM_DUMP),y)
+KBUILD_CPPFLAGS += -DCONFIG_DISABLE_CNSS_SRAM_DUMP
+endif
+
 obj-$(CONFIG_CNSS2) += cnss2/
 obj-$(CONFIG_ICNSS2) += icnss2/
 obj-$(CONFIG_CNSS_GENL) += cnss_genl/

cnss2/Kconfig

@@ -117,3 +117,12 @@ config CNSS2_CONDITIONAL_POWEROFF
 	  for the first time to avoid potential subsequent failures during
 	  device re-probe(after wlan function driver loaded) under very bad
 	  thermal conditions.
+
+config DISABLE_CNSS_SRAM_DUMP
+	bool "Disable sram_dump"
+	depends on CNSS2
+	depends on CNSS2_DEBUG
+	help
+	  If enabled, CNSS plafrom driver will not dump sram when MHI power on
+	  timeout for CNSS QCA6490 chipset only. Since this feature about
+	  sram dump costs 4M memory.

cnss2/main.c

@@ -4235,6 +4235,19 @@ int cnss_wlan_hw_disable_check(struct cnss_plat_data *plat_priv)
 }
 #endif
 
+#ifdef CONFIG_DISABLE_CNSS_SRAM_DUMP
+static void cnss_sram_dump_init(struct cnss_plat_data *plat_priv)
+{
+}
+#else
+static void cnss_sram_dump_init(struct cnss_plat_data *plat_priv)
+{
+	if (plat_priv->device_id == QCA6490_DEVICE_ID &&
+	    cnss_get_host_build_type() == QMI_HOST_BUILD_TYPE_PRIMARY_V01)
+		plat_priv->sram_dump = kcalloc(SRAM_DUMP_SIZE, 1, GFP_KERNEL);
+}
+#endif
+
 static int cnss_misc_init(struct cnss_plat_data *plat_priv)
 {
 	int ret;
@@ -4278,9 +4291,7 @@ static int cnss_misc_init(struct cnss_plat_data *plat_priv)
 		cnss_pr_err("QMI IPC connection call back register failed, err = %d\n",
 			    ret);
 
-	if (plat_priv->device_id == QCA6490_DEVICE_ID &&
-	    cnss_get_host_build_type() == QMI_HOST_BUILD_TYPE_PRIMARY_V01)
-		plat_priv->sram_dump = kcalloc(SRAM_DUMP_SIZE, 1, GFP_KERNEL);
+	cnss_sram_dump_init(plat_priv);
 
 	if (of_property_read_bool(plat_priv->plat_dev->dev.of_node,
 				  "qcom,rc-ep-short-channel"))
@@ -4289,6 +4300,19 @@ static int cnss_misc_init(struct cnss_plat_data *plat_priv)
 	return 0;
 }
 
+#ifdef CONFIG_DISABLE_CNSS_SRAM_DUMP
+static void cnss_sram_dump_deinit(struct cnss_plat_data *plat_priv)
+{
+}
+#else
+static void cnss_sram_dump_deinit(struct cnss_plat_data *plat_priv)
+{
+	if (plat_priv->device_id == QCA6490_DEVICE_ID &&
+	    cnss_get_host_build_type() == QMI_HOST_BUILD_TYPE_PRIMARY_V01)
+		kfree(plat_priv->sram_dump);
+}
+#endif
+
 static void cnss_misc_deinit(struct cnss_plat_data *plat_priv)
 {
 	cnss_plat_ipc_unregister(CNSS_PLAT_IPC_DAEMON_QMI_CLIENT_V01,
@@ -4303,7 +4327,7 @@ static void cnss_misc_deinit(struct cnss_plat_data *plat_priv)
 	del_timer(&plat_priv->fw_boot_timer);
 	wakeup_source_unregister(plat_priv->recovery_ws);
 	cnss_deinit_sol_gpio(plat_priv);
-	kfree(plat_priv->sram_dump);
+	cnss_sram_dump_deinit(plat_priv);
 	kfree(plat_priv->on_chip_pmic_board_ids);
 }
 

cnss2/main.h

@@ -555,7 +555,9 @@ struct cnss_plat_data {
 	u8 use_fw_path_with_prefix;
 	char firmware_name[MAX_FIRMWARE_NAME_LEN];
 	char fw_fallback_name[MAX_FIRMWARE_NAME_LEN];
+#ifndef CONFIG_DISABLE_CNSS_SRAM_DUMP
 	u8 *sram_dump;
+#endif
 	struct completion rddm_complete;
 	struct completion recovery_complete;
 	struct cnss_control_params ctrl_params;

cnss2/pci.c

@@ -1693,6 +1693,11 @@ static void cnss_pci_dump_bl_sram_mem(struct cnss_pci_data *pci_priv)
 	}
 }
 
+#ifdef CONFIG_DISABLE_CNSS_SRAM_DUMP
+static void cnss_pci_dump_sram(struct cnss_pci_data *pci_priv)
+{
+}
+#else
 static void cnss_pci_dump_sram(struct cnss_pci_data *pci_priv)
 {
 	struct cnss_plat_data *plat_priv;
@@ -1727,6 +1732,7 @@ static void cnss_pci_dump_sram(struct cnss_pci_data *pci_priv)
 			cond_resched();
 	}
 }
+#endif
 
 static int cnss_pci_handle_mhi_poweron_timeout(struct cnss_pci_data *pci_priv)
 {