qcacld-3.0: Add ini params for three antenna BTC mode

Add below ini parameters for three antenna BTC mode and send them to firmware using WMI command WMI_COEX_CONFIG_CMDID. 1. gSetBTCMode 2. gSetAntennaIsolation 3. gSetMaxTxPowerForBTC 4. gSetWlanLowRssiThreshold 5. gSetBtLowRssiThreshold 6. gSetBtInterferenceLowLL 7. gSetBtInterferenceLowUL 8. gSetBtInterferenceMediumLL 9. gSetBtInterferenceMediumUL 10. gSetBtInterferenceHighLL 11. gSetBtInterferenceHighUL Change-Id: I69030b6e80ee99912e2f3baced883894d18db0b6 CRs-Fixed: 2298652
2018-09-12 13:42:50 +05:30
commit 3b63709be9
--- a/components/fw_offload/dispatcher/inc/cfg_coex.h
+++ b/components/fw_offload/dispatcher/inc/cfg_coex.h
@@ -0,0 +1,251 @@
+/*
+ * Copyright (c) 2012 - 2018 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/**
+ * DOC: This file contains centralized definitions of converged configuration.
+ */
+
+#ifndef __CFG_COEX_H
+#define __CFG_COEX_H
+
+/*
+ * <ini>
+ * gSetBTCMode - Config BTC mode
+ * @Min: 0
+ * @Max: 2
+ * @Default: 0
+ *
+ * 0 - TDD
+ * 1 - FDD
+ * 2 - Hybrid
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_BTC_MODE CFG_INI_UINT( \
+			"gSetBTCMode", \
+			0, \
+			2, \
+			0, \
+			CFG_VALUE_OR_DEFAULT, \
+			"BTC mode")
+
+/*
+ * <ini>
+ * gSetAntennaIsolation - Set Antenna Isolation
+ * @Min: 0
+ * @Max: 255
+ * @Default: 25
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_ANTENNA_ISOLATION CFG_INI_UINT( \
+			"gSetAntennaIsolation", \
+			0, \
+			255, \
+			25, \
+			CFG_VALUE_OR_DEFAULT, \
+			"Antenna Isolation")
+
+/*
+ * <ini>
+ * gSetMaxTxPowerForBTC - Set Max WLAN Tx power in COEX scenario
+ * @Min: 0
+ * @Max: 100
+ * @Default: 100
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_MAX_TX_POWER_FOR_BTC CFG_INI_UINT( \
+			"gSetMaxTxPowerForBTC", \
+			0, \
+			100, \
+			100, \
+			CFG_VALUE_OR_DEFAULT, \
+			"Max Tx Power for BTC")
+
+/*
+ * <ini>
+ * gSetWlanLowRssiThreshold - Set WLAN low RSSI threshold for BTC mode switching
+ * @Min: -100
+ * @Max: 0
+ * @Default: -80
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_WLAN_LOW_RSSI_THRESHOLD CFG_INI_INT( \
+			"gSetWlanLowRssiThreshold", \
+			-100, \
+			0, \
+			-80, \
+			CFG_VALUE_OR_DEFAULT, \
+			"WLAN Low RSSI Threshold")
+
+/*
+ * <ini>
+ * gSetBtLowRssiThreshold - Set BT low RSSI threshold for BTC mode switching
+ * @Min: -100
+ * @Max: 0
+ * @Default: -80
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_BT_LOW_RSSI_THRESHOLD CFG_INI_INT( \
+			"gSetBtLowRssiThreshold", \
+			-100, \
+			0, \
+			-80, \
+			CFG_VALUE_OR_DEFAULT, \
+			"BT Low RSSI Threshold")
+
+/*
+ * <ini>
+ * gSetBtInterferenceLowLL - Set lower limit of low level BT interference
+ * @Min: -100
+ * @Max: 100
+ * @Default: -25
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_BT_INTERFERENCE_LOW_LL CFG_INI_INT( \
+			"gSetBtInterferenceLowLL", \
+			-100, \
+			100, \
+			-25, \
+			CFG_VALUE_OR_DEFAULT, \
+			"BT Interference Low LL")
+
+/*
+ * <ini>
+ * gSetBtInterferenceLowUL - Set upper limit of low level BT interference
+ * @Min: -100
+ * @Max: 100
+ * @Default: -21
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_BT_INTERFERENCE_LOW_UL CFG_INI_INT( \
+			"gSetBtInterferenceLowUL", \
+			-100, \
+			100, \
+			-21, \
+			CFG_VALUE_OR_DEFAULT, \
+			"BT Interference Low UL")
+
+/*
+ * <ini>
+ * gSetBtInterferenceMediumLL - Set lower limit of medium level BT interference
+ * @Min: -100
+ * @Max: 100
+ * @Default: -20
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_BT_INTERFERENCE_MEDIUM_LL CFG_INI_INT( \
+			"gSetBtInterferenceMediumLL", \
+			-100, \
+			100, \
+			-20, \
+			CFG_VALUE_OR_DEFAULT, \
+			"BT Interference Medium LL")
+
+/*
+ * <ini>
+ * gSetBtInterferenceMediumUL - Set upper limit of medium level BT interference
+ * @Min: -100
+ * @Max: 100
+ * @Default: -16
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_BT_INTERFERENCE_MEDIUM_UL CFG_INI_INT( \
+			"gSetBtInterferenceMediumUL", \
+			-100, \
+			100, \
+			-16, \
+			CFG_VALUE_OR_DEFAULT, \
+			"BT Interference Medium UL")
+
+/*
+ * <ini>
+ * gSetBtInterferenceHighLL - Set lower limit of high level BT interference
+ * @Min: -100
+ * @Max: 100
+ * @Default: -15
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_BT_INTERFERENCE_HIGH_LL CFG_INI_INT( \
+			"gSetBtInterferenceHighLL", \
+			-100, \
+			100, \
+			-15, \
+			CFG_VALUE_OR_DEFAULT, \
+			"BT Interference High LL")
+
+/*
+ * <ini>
+ * gSetBtInterferenceHighUL - Set upper limit of high level BT interference
+ * @Min: -100
+ * @Max: 100
+ * @Default: -11
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_BT_INTERFERENCE_HIGH_UL CFG_INI_INT( \
+			"gSetBtInterferenceHighUL", \
+			-100, \
+			100, \
+			-11, \
+			CFG_VALUE_OR_DEFAULT, \
+			"BT Interference High UL")
+
+#define CFG_COEX_ALL \
+	CFG(CFG_BTC_MODE) \
+	CFG(CFG_ANTENNA_ISOLATION) \
+	CFG(CFG_MAX_TX_POWER_FOR_BTC) \
+	CFG(CFG_WLAN_LOW_RSSI_THRESHOLD) \
+	CFG(CFG_BT_LOW_RSSI_THRESHOLD) \
+	CFG(CFG_BT_INTERFERENCE_LOW_LL) \
+	CFG(CFG_BT_INTERFERENCE_LOW_UL) \
+	CFG(CFG_BT_INTERFERENCE_MEDIUM_LL) \
+	CFG(CFG_BT_INTERFERENCE_MEDIUM_UL) \
+	CFG(CFG_BT_INTERFERENCE_HIGH_LL) \
+	CFG(CFG_BT_INTERFERENCE_HIGH_UL)
+#endif
--- a/components/fw_offload/dispatcher/inc/cfg_fwol.h
+++ b/components/fw_offload/dispatcher/inc/cfg_fwol.h
@@ -23,7 +23,10 @@
 #include "cfg_converged.h"
 #include "qdf_types.h"

-#define CFG_FWOL_ALL
+#include "cfg_coex.h"
+
+#define CFG_FWOL_ALL \
+	CFG_COEX_ALL

 #endif /* __CFG_FWOL_H */

--- a/components/fw_offload/dispatcher/inc/wlan_fwol_ucfg_api.h
+++ b/components/fw_offload/dispatcher/inc/wlan_fwol_ucfg_api.h
@@ -26,6 +26,8 @@
 #include <wlan_objmgr_global_obj.h>
 #include <wlan_cmn.h>

+#include "wlan_fw_offload_main.h"
+
 /**
 * ucfg_fwol_psoc_open() - FWOL component Open
 * @psoc: pointer to psoc object
@@ -64,4 +66,15 @@ QDF_STATUS ucfg_fwol_init(void);
 */
 void ucfg_fwol_deinit(void);

+/**
+ * ucfg_fwol_get_coex_config_params() - Get coex config params
+ * @psoc: Pointer to psoc object
+ * @coex_config: Pointer to struct wlan_fwol_coex_config
+ *
+ * Return: QDF_STATUS
+ */
+QDF_STATUS
+ucfg_fwol_get_coex_config_params(struct wlan_objmgr_psoc *psoc,
+				 struct wlan_fwol_coex_config *coex_config);
+
 #endif /* _WLAN_FWOL_UCFG_API_H_ */
--- a/components/fw_offload/dispatcher/src/wlan_fwol_ucfg_api.c
+++ b/components/fw_offload/dispatcher/src/wlan_fwol_ucfg_api.c
@@ -149,3 +149,19 @@ void ucfg_fwol_deinit(void)
 		fwol_err("unable to unregister psoc create handle");
 }

+QDF_STATUS
+ucfg_fwol_get_coex_config_params(struct wlan_objmgr_psoc *psoc,
+				 struct wlan_fwol_coex_config *coex_config)
+{
+	struct wlan_fwol_psoc_obj *fwol_obj;
+
+	fwol_obj = fwol_get_psoc_obj(psoc);
+	if (!fwol_obj) {
+		fwol_err("Failed to get fwol obj");
+		return QDF_STATUS_E_FAILURE;
+	}
+
+	*coex_config = fwol_obj->cfg.coex_config;
+
+	return QDF_STATUS_SUCCESS;
+}