fw-api: CL 2794473 - update fw common interface files

WMI interface extension to allow ROAM_INVOKE_CMD without scan/minimum absolute RSSI

Change-Id: I1b54977600b86c8328fe88e69a49fc94007b8b35
CRs-Fixed: 1107600

fw/wmi_tlv_defs.h

@@ -2766,7 +2766,9 @@ WMITLV_CREATE_PARAM_STRUC(WMI_MDNS_GET_STATS_CMDID);
 #define WMITLV_TABLE_WMI_ROAM_INVOKE_CMDID(id,op,buf,len) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_roam_invoke_cmd_fixed_param, wmi_roam_invoke_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, channel_list, WMITLV_SIZE_VAR) \
-    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_mac_addr, bssid_list, WMITLV_SIZE_VAR)
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_mac_addr, bssid_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_FIXED_STRUC, wmi_tlv_buf_len_param, bcn_prb_buf_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_BYTE, A_UINT8, bcn_prb_frm, WMITLV_SIZE_VAR)
 WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_INVOKE_CMDID);
 
 /* SAP Authentication offload param Cmd */

fw/wmi_unified.h

@@ -8272,6 +8272,13 @@ typedef struct {
     A_UINT32 rsn_mcastcipherset;
     /** mcast/group management frames cipher set */
     A_UINT32 rsn_mcastmgmtcipherset;
+    /**
+     * rssi_abs_thresold value: the value of the candidate AP should
+     * higher than this absolute RSSI threshold.
+     * Zero means no absolute minimum RSSI is required.
+     * units are the offset from the noise floor in dB.
+     */
+    A_UINT32 rssi_abs_thresh;
 } wmi_ap_profile;
 
 /** Support early stop roaming scanning when finding a strong candidate AP
@@ -8601,6 +8608,7 @@ typedef struct{
 #define WMI_ROAM_INVOKE_SCAN_MODE_FIXED_CH      0   /* scan given channel only */
 #define WMI_ROAM_INVOKE_SCAN_MODE_CACHE_LIST    1   /* scan cached channel list */
 #define WMI_ROAM_INVOKE_SCAN_MODE_FULL_CH       2   /* scan full channel */
+#define WMI_ROAM_INVOKE_SCAN_MODE_SKIP          3   /* no scan is performed. use beacon/probe resp given by the host */
 
 #define WMI_ROAM_INVOKE_AP_SEL_FIXED_BSSID      0   /* roam to given BSSID only */
 #define WMI_ROAM_INVOKE_AP_SEL_ANY_BSSID        1   /* roam to any BSSID */
@@ -8627,11 +8635,14 @@ typedef struct {
     A_UINT32 roam_delay; /** 0 = immediate roam, 1-2^32 = roam after this delay (msec) */
     A_UINT32 num_chan; /** # if channels to scan. In the TLV channel_list[] */
     A_UINT32 num_bssid;  /** number of bssids. In the TLV bssid_list[] */
+    A_UINT32 num_buf; /** number of buffers In the TLV bcn_prb_buf_list[] */
     /**
      * TLV (tag length value) parameters follows roam_invoke_req
      * The TLV's are:
      *     A_UINT32 channel_list[];
      *     wmi_mac_addr bssid_list[];
+     *     wmi_tlv_buf_len_param bcn_prb_buf_list[];
+     *     A_UINT8 bcn_prb_frm[];
      */
 } wmi_roam_invoke_cmd_fixed_param;
 

fw/wmi_version.h

@@ -36,7 +36,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 333
+#define __WMI_REVISION_ 334
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work