samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

qcacld-3.0: CL 1445182 update fw common interface files

Browse Source 
Fix QTF build errors
Merge remaining common commands and events of WIN and MCL

Change-Id: If534f7960d39d40fc6cb2ed18c37ecd7e4c6db97
CRs-fixed: 865207
This commit is contained in:
Govind Singh
2016-02-01 13:33:09 +05:30
parent c7d519439b
commit 32cced3b75
3 changed files with 246 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
target/inc/wmi_services.h
View File

@@ -141,6 +141,8 @@ typedef enum {
WMI_SERVICE_RESTRT_CHNL_SUPPORT, /* Restricted Channel Support */
WMI_SERVICE_BPF_OFFLOAD, /* FW supports bpf offload */
WMI_SERVICE_SYNC_DELETE_CMDS, /* FW sends response event for Peer, Vdev delete commands */
WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
WMI_MAX_SERVICE = 128 /* max service */
} WMI_SERVICE;

244
target/inc/wmi_unified.h
View File

@@ -1354,6 +1354,8 @@ typedef enum {
#define WMI_CHANNEL_CHANGE_CAUSE_CSA 13 /*Indicate reason for channel switch */
#define WMI_CHAN_FLAG_HALF_RATE 14 /* Indicates half rate channel */
#define WMI_CHAN_FLAG_QUARTER_RATE 15 /* Indicates quarter rate channel */
/* Enable radar event reporting for sec80 in VHT80p80 */
#define WMI_CHAN_FLAG_DFS_CFREQ2 16
#define WMI_SET_CHANNEL_FLAG(pwmi_channel, flag) do { \
(pwmi_channel)->info |= (1 << flag); \
@@ -2365,6 +2367,12 @@ typedef struct {
* oui specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the probe req frame.
* if oui is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored*/
#define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000
/** allow mgmt transmission during off channel scan */
#define WMI_SCAN_OFFCHAN_MGMT_TX 0x2000
/** allow data transmission during off channel scan */
#define WMI_SCAN_OFFCHAN_DATA_TX 0x4000
/** allow capture ppdu with phy errrors */
#define WMI_SCAN_CAPTURE_PHY_ERROR 0x8000
/** WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
#define WMI_SCAN_CLASS_MASK 0xFF000000
@@ -2885,6 +2893,7 @@ typedef struct {
A_UINT32 reg_domain_5G;
A_UINT32 conformance_test_limit_2G;
A_UINT32 conformance_test_limit_5G;
A_UINT32 dfs_domain;
} wmi_pdev_set_regdomain_cmd_fixed_param;
typedef struct {
@@ -3082,6 +3091,14 @@ typedef struct {
A_UINT32 ies_present_flag; /* WMI_CSA_EVENT_IES_PRESENT_FLAG */
} wmi_csa_event_fixed_param;
typedef enum {
WAL_PEER_MCAST2UCAST_DISABLED = 0,
/* Drop the frames if match is not found */
WAL_PEER_MCAST2UCAST_DROP_EMPTY = 1,
/* Send as mcast if match is not found */
WAL_PEER_MCAST2UCAST_MCAST_EMPTY = 2,
} WMI_PEER_MCAST2UCAST_MODE;
typedef enum {
/** TX chain mask */
WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
@@ -3257,6 +3274,111 @@ typedef enum {
* the values. Safety check will happen in Halphy
*/
WMI_PDEV_PARAM_TXPOWER_DECR_DB,
/** enable and disable aggregate burst along with duration */
WMI_PDEV_PARAM_AGGR_BURST,
/** Set the global RX decap mode */
WMI_PDEV_PARAM_RX_DECAP_MODE,
/** Enable/Disable Fast channel reset */
WMI_PDEV_PARAM_FAST_CHANNEL_RESET,
/** Default antenna for Smart antenna */
WMI_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
/** Set the user-specified antenna gain */
WMI_PDEV_PARAM_ANTENNA_GAIN,
/** Set the user-specified RX filter */
WMI_PDEV_PARAM_RX_FILTER,
/*
* configure the user-specified MCAST tid for managed mcast feature
* 0-15 is the valid range. 0xff will clear the tid setting
*/
WMI_PDEV_SET_MCAST_TO_UCAST_TID,
/** Enable/Disable Proxy sta mode */
WMI_PDEV_PARAM_PROXY_STA_MODE,
/*
* configure the mcast2ucast mode for the pdev->peer_mcast.
* See WMI_PEER_MCAST2UCAST_MODE for possible values
*/
WMI_PDEV_PARAM_SET_MCAST2UCAST_MODE,
/** Sets the Mcast buffers for cloning, to support Mcast enhancement */
WMI_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
/** Remove the Mcast buffers added by host */
WMI_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
/** En/disable station power save state indication */
WMI_PDEV_PEER_STA_PS_STATECHG_ENABLE,
/** Access category on which ARP frames are sent */
WMI_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
/** allow or disallow interbss frame forwarding */
WMI_PDEV_PARAM_BLOCK_INTERBSS,
/** Enable/Disable reset */
WMI_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
/** Enable/Disable/Set MSDU_TTL in milliseconds. */
WMI_PDEV_PARAM_SET_MSDU_TTL_CMDID,
/** Set global PPDU duration limit (usec). */
WMI_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
/** set txbf sounding period of vap in milliseconds */
WMI_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
/** Set promiscuous mode */
WMI_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
/** Set burst mode */
WMI_PDEV_PARAM_SET_BURST_MODE_CMDID,
/** enable enhanced stats */
WMI_PDEV_PARAM_EN_STATS,
/** Set mu-grouping policy */
WMI_PDEV_PARAM_MU_GROUP_POLICY,
/** Channel Hopping Enable */
WMI_PDEV_PARAM_NOISE_DETECTION,
/** Set Channel Hopping NF threshold in dBm */
WMI_PDEV_PARAM_NOISE_THRESHOLD,
/** Set PAPRD policy */
WMI_PDEV_PARAM_DPD_ENABLE,
/** Enable/disable mcast/bcast echo, used by ProxySTA */
WMI_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
/** ATF enable/disable strict schedule */
WMI_PDEV_PARAM_ATF_STRICT_SCH,
/** ATF set access category duration, B0-B29 duration, B30-B31: AC */
WMI_PDEV_PARAM_ATF_SCHED_DURATION,
/** Default antenna polarization */
WMI_PDEV_PARAM_ANT_PLZN,
/** Set mgmt retry limit */
WMI_PDEV_PARAM_MGMT_RETRY_LIMIT,
/** Set CCA sensitivity level in dBm */
WMI_PDEV_PARAM_SENSITIVITY_LEVEL,
/** Set 2G positive and negative Tx power in 0.5dBm units */
WMI_PDEV_PARAM_SIGNED_TXPOWER_2G,
/** Set 5G positive and negative Tx power in 0.5dBm units */
WMI_PDEV_PARAM_SIGNED_TXPOWER_5G,
/** Enable/disble AMSDU for tids */
WMI_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
/** Enable/disable AMPDU for tids */
WMI_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
/** Set CCA threshold in dBm */
WMI_PDEV_PARAM_CCA_THRESHOLD,
/** RTS Fixed rate setting */
WMI_PDEV_PARAM_RTS_FIXED_RATE,
/** Pdev reset */
WMI_PDEV_PARAM_PDEV_RESET,
/** wapi mbssid offset **/
WMI_PDEV_PARAM_WAPI_MBSSID_OFFSET,
/** ARP DEBUG source address*/
WMI_PDEV_PARAM_ARP_DBG_SRCADDR,
/** ARP DEBUG destination address*/
WMI_PDEV_PARAM_ARP_DBG_DSTADDR,
/** ATF enable/disable obss noise scheduling */
WMI_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
/** ATF obss noise scaling factor */
WMI_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
/**
* TX power reduction scaling exponent - final tx power is the
* nominal tx power (A_MIN(reg_pow,ctl,etc..)) divided by
* 2^(scale exponent). For example:
* If this scale exponent is 0, the power is unchanged (divided by 2^0)
* If this factor is 1, the power is scaled down by 2^1, i.e. 3 dB
* If this factor is 2, the power is scaled down by 2^2, i.e. 6 dB
* If this factor is 3, the power is scaled down by 2^3, i.e. 9 dB
*/
WMI_PDEV_PARAM_CUST_TXPOWER_SCALE,
/** ATF enabe/disabe dynamically */
WMI_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
} WMI_PDEV_PARAM;
typedef enum {
@@ -3698,6 +3820,7 @@ typedef enum {
WMI_REQUEST_VDEV_STAT = 0x08,
WMI_REQUEST_BCNFLT_STAT = 0x10,
WMI_REQUEST_VDEV_RATE_STAT = 0x20,
WMI_REQUEST_INST_STAT = 0x40,
} wmi_stats_id;
typedef struct {
@@ -4366,6 +4489,8 @@ typedef struct {
#define WMI_UNIFIED_VDEV_SUBTYPE_P2P_DEVICE 0x1
#define WMI_UNIFIED_VDEV_SUBTYPE_P2P_CLIENT 0x2
#define WMI_UNIFIED_VDEV_SUBTYPE_P2P_GO 0x3
#define WMI_UNIFIED_VDEV_SUBTYPE_PROXY_STA 0x4
#define WMI_UNIFIED_VDEV_SUBTYPE_MESH 0x5
/** values for vdev_start_request flags */
/** Indicates that AP VDEV uses hidden ssid. only valid for
@@ -4817,6 +4942,50 @@ typedef enum {
* by the values. Safety check will happen in Halphy.
*/
WMI_VDEV_PARAM_TXPOWER_SCALE_DECR_DB,
/** Multicast to Unicast conversion setting */
WMI_VDEV_PARAM_MCAST2UCAST_SET,
/** Total number of HW retries */
WMI_VDEV_PARAM_RC_NUM_RETRIES,
/** Max tx percentage for cabq */
WMI_VDEV_PARAM_CABQ_MAXDUR,
/** MFPTEST settings */
WMI_VDEV_PARAM_MFPTEST_SET,
/** RTS Fixed rate setting */
WMI_VDEV_PARAM_RTS_FIXED_RATE,
/** VHT SGI MASK */
WMI_VDEV_PARAM_VHT_SGIMASK,
/** VHT80 Auto Rate MASK */
WMI_VDEV_PARAM_VHT80_RATEMASK,
/** set Proxy STA features for this vap */
WMI_VDEV_PARAM_PROXY_STA,
/** set virtual cell mode - enable/disable */
WMI_VDEV_PARAM_VIRTUAL_CELL_MODE,
/** Set receive packet type */
WMI_VDEV_PARAM_RX_DECAP_TYPE,
/** Set ratemask with specific Bandwidth and NSS */
WMI_VDEV_PARAM_BW_NSS_RATEMASK,
/** Set SENSOR Support */
WMI_VDEV_PARAM_SENSOR_AP,
/** Set beacon rate */
WMI_VDEV_PARAM_BEACON_RATE,
/** Enable CTS to self for DTIM beacon */
WMI_VDEV_PARAM_DTIM_ENABLE_CTS,
/** Disable station kickout at Vap level */
WMI_VDEV_PARAM_STA_KICKOUT,
} WMI_VDEV_PARAM;
@@ -5257,6 +5426,17 @@ enum wmi_ap_ps_peer_param {
/** Time in seconds for aging out buffered frames for STA in power save */
WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
/** Specify frame types that are considered SIFS RESP trigger frame */
WMI_AP_PS_PEER_PARAM_SIFS_RESP_FRMTYPE = 3,
/*
* Specifies the trigger state of TID.
* Valid only for UAPSD frame type
*/
WMI_AP_PS_PEER_PARAM_SIFS_RESP_UAPSD = 4,
/** Specifies the WNM sleep state of a STA */
WMI_AP_PS_PEER_PARAM_WNM_SLEEP = 5,
};
typedef struct {
@@ -5840,6 +6020,12 @@ typedef struct {
/** peer phy mode */
#define WMI_PEER_PHYMODE 0xD
/** Use FIXED Pwr */
#define WMI_PEER_USE_FIXED_PWR 0xE
/** Set peer fixed rate */
#define WMI_PEER_PARAM_FIXED_RATE 0xF
/** Whitelist peer TIDs */
#define WMI_PEER_SET_MU_WHITELIST 0x10
/** mimo ps values for the parameter WMI_PEER_MIMO_PS_STATE */
#define WMI_PEER_MIMO_PS_NONE 0x0
@@ -5883,6 +6069,7 @@ typedef struct {
A_UINT32 rx_mcs_set; /* Negotiated RX VHT rates */
A_UINT32 tx_max_rate; /* Max Tx data rate */
A_UINT32 tx_mcs_set; /* Negotiated TX VHT rates */
A_UINT32 tx_max_mcs_nss; /* b0-b3: max mcs idx; b4-b7: max nss */
} wmi_vht_rate_set;
/*
@@ -5975,6 +6162,21 @@ typedef struct {
/** total number of negotiated ht rate set. Also the sizeof
* peer_ht_rates[] */
A_UINT32 num_peer_ht_rates;
/**
* Bitmap providing QCA proprietary mapping of bandwidths to max Rx NSS
* for this peer.
* This is required since 802.11 standard currently facilitates peer to
* be able to advertise only a single max Rx NSS value across all
* bandwidths.
* Some QCA chipsets might need to be able to advertise a different max
* Rx NSS value for 160 MHz, than that for 80 MHz and lower.
*
* bit[2:0] : Represents value of Rx NSS for VHT 160 MHz
* bit[30:3]: Reserved
* bit[31] : MSB(0/1): 1 in case of valid data else all bits will be
* set to 0 by host
*/
A_UINT32 peer_bw_rxnss_override;
/* Following this struc are the TLV's:
* A_UINT8 peer_legacy_rates[];
* A_UINT8 peer_ht_rates[];
@@ -5982,12 +6184,17 @@ typedef struct {
*/
} wmi_peer_assoc_complete_cmd_fixed_param;
/* WDS Entry Flags */
#define WMI_WDS_FLAG_STATIC 0x1 /* Disable aging & learning */
typedef struct {
A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_add_wds_entry_cmd_fixed_param */
/** peer MAC address */
wmi_mac_addr peer_macaddr;
/** wds MAC addr */
wmi_mac_addr wds_macaddr;
/* Flags associated with WDS entry - see WMI_WDS_FLAG defs */
A_UINT32 flags;
} wmi_peer_add_wds_entry_cmd_fixed_param;
typedef struct {
@@ -6042,6 +6249,12 @@ typedef struct {
A_UINT32 rx_clear_count;
/** cycle count */
A_UINT32 cycle_count;
/** channel tx power per range in 0.5dBm steps */
A_UINT32 chan_tx_pwr_range;
/** channel tx power per throughput */
A_UINT32 chan_tx_pwr_tp;
/** rx frame count (cumulative) */
A_UINT32 rx_frame_count;
} wmi_chan_info_event_fixed_param;
/**
@@ -6148,6 +6361,16 @@ enum wmi_peer_mcast_group_action {
#define WMI_PEER_MCAST_GROUP_FLAG_ACTION_S 0
#define WMI_PEER_MCAST_GROUP_FLAG_WILDCARD_M 0x2
#define WMI_PEER_MCAST_GROUP_FLAG_WILDCARD_S 1
/* flag to exclude an ip while filtering.set to exclude */
#define WMI_PEER_MCAST_GROUP_FLAG_SRC_FILTER_EXCLUDE_M 0x4
#define WMI_PEER_MCAST_GROUP_FLAG_SRC_FILTER_EXCLUDE_S 2
/* flag to say ipv4/ipv6. Will be set for ipv6 */
#define WMI_PEER_MCAST_GROUP_FLAG_IPV6_M 0x8
#define WMI_PEER_MCAST_GROUP_FLAG_IPV6_S 3
/* delete all mcast table entries. */
#define WMI_PEER_MCAST_GROUP_FLAG_DELETEALL_M 0x10
#define WMI_PEER_MCAST_GROUP_FLAG_DELETEALL_S 4
/* multicast group membership commands */
/* TODO: Converting this will be tricky since it uses an union.
Also, the mac_addr is not aligned. We will convert to the wmi_mac_addr */
@@ -6156,7 +6379,25 @@ typedef struct {
/** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_mcast_group_cmd_fixed_param */
A_UINT32 flags;
wmi_mac_addr ucast_mac_addr;
A_UINT8 mcast_ip_addr[16]; /* in network byte order */
/*
* for ipv4, bytes (12-15) should contain ip address and
* other lower bytes 0. ipv6 should have all bytes valid
*/
A_UINT8 mcast_ip_addr[16]; /* in network byte order */
/*
* for ipv6, all 16 bytes has to be valid;
* for ipv4 last 4 bytes(12-15) has to be valid, rest all 0s
*/
A_UINT8 mcast_ip_mask[16]; /* zero out lower bytes if ipv4 */
/* number of address filters - irrespective of ipv4/ipv6 addresses */
A_UINT32 num_filter_addr;
/*
* this array should contain the src IPs that are to be filtered
* during find. The array should be packed. If there are 2 ipv4
* addresses, there should be 8 bytes and rest all 0s
*/
A_UINT8 filter_addr[64]; /* 16 ipv4 addresses or 4 ipv6 addresses */
A_UINT8 vdev_id; /* vdev of this mcast group */
} wmi_peer_mcast_group_cmd_fixed_param;
/** Offload Scan and Roaming related commands */
@@ -6458,6 +6699,7 @@ typedef struct wmi_bcn_send_from_host {
A_UINT32 frag_ptr; /* Physical address of the frame */
A_UINT32 frame_ctrl; /* farme ctrl to setup PPDU desc */
A_UINT32 dtim_flag; /* to control CABQ traffic */
A_UINT32 bcn_antenna; /* Antenna for beacon transmission */
} wmi_bcn_send_from_host_cmd_fixed_param;
/* cmd to support bcn snd for all vaps at once */

2
target/inc/wmi_version.h
View File

@@ -36,7 +36,7 @@
#define __WMI_VER_MINOR_ 0
/** WMI revision number has to be incremented when there is a
* change that may or may not break compatibility */
#define __WMI_REVISION_ 197
#define __WMI_REVISION_ 198
/** The Version Namespace should not be normally changed. Only
* host and firmware of the same WMI namespace will work