samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Rozštěpit 0
Zdrojový kód Úkoly Pull requesty Akce Balíčky Projekty Vydání Wiki Aktivita

qcacld-3.0: Refactor country change update APIs

Procházet zdrojové kódy 
Iterate through all the link info which are active in adapter
on country change update.
1) hdd_country_change_update_sap()
2) hdd_country_change_update_sta()

Change-Id: I199ca2cd87e114c4a8c64ee356388781b3a53097
CRs-Fixed: 3522443
Tento commit je obsažen v:
Vinod Kumar Pirla
2023-02-26 03:34:48 -08:00
odevzdal Rahul Choudhary
rodič e5462e248b
revize 32502d8e0c
1 změnil soubory, kde provedl 72 přidání a 63 odebrání
Stáhněte soubor záplaty Stáhněte rozdílový soubor Rozbalit všechny soubory Sbalit všechny soubory

135
core/hdd/src/wlan_hdd_regulatory.c
Zobrazit soubor

@@ -1647,62 +1647,67 @@ static void hdd_country_change_update_sta(struct hdd_context *hdd_ctx)
qdf_freq_t oper_freq;
eCsrPhyMode csr_phy_mode;
wlan_net_dev_ref_dbgid dbgid = NET_DEV_HOLD_COUNTRY_CHANGE_UPDATE_STA;
struct wlan_hdd_link_info *link_info;
pdev = hdd_ctx->pdev;
hdd_for_each_adapter_dev_held_safe(hdd_ctx, adapter, next_adapter,
dbgid) {
width_changed = false;
oper_freq = hdd_get_link_info_home_channel(adapter->deflink);
if (oper_freq)
freq_changed = wlan_reg_is_disable_for_pwrmode(
pdev,
oper_freq,
hdd_adapter_for_each_active_link_info(adapter, link_info) {
width_changed = false;
oper_freq = hdd_get_link_info_home_channel(link_info);
if (oper_freq)
freq_changed = wlan_reg_is_disable_for_pwrmode(
pdev, oper_freq,
REG_CURRENT_PWR_MODE);
else
freq_changed = false;
else
freq_changed = false;
switch (adapter->device_mode) {
case QDF_P2P_CLIENT_MODE:
/*
* P2P client is the same as STA
* continue to next statement
*/
case QDF_STA_MODE:
sta_ctx =
WLAN_HDD_GET_STATION_CTX_PTR(adapter->deflink);
new_phy_mode = wlan_reg_get_max_phymode(pdev,
switch (adapter->device_mode) {
case QDF_P2P_CLIENT_MODE:
/*
* P2P client is the same as STA
* continue to next statement
*/
case QDF_STA_MODE:
sta_ctx =
WLAN_HDD_GET_STATION_CTX_PTR(link_info);
new_phy_mode = wlan_reg_get_max_phymode(pdev,
REG_PHYMODE_MAX,
oper_freq);
csr_phy_mode =
csr_convert_from_reg_phy_mode(new_phy_mode);
phy_changed = (sta_ctx->reg_phymode != csr_phy_mode);
csr_phy_mode =
csr_convert_from_reg_phy_mode(new_phy_mode);
phy_changed =
(sta_ctx->reg_phymode != csr_phy_mode);
width_changed = hdd_country_change_bw_check(hdd_ctx,
width_changed =
hdd_country_change_bw_check(hdd_ctx,
adapter,
oper_freq);
if (hdd_is_vdev_in_conn_state(adapter->deflink)) {
if (!hdd_is_vdev_in_conn_state(link_info))
continue;
if (phy_changed || freq_changed ||
width_changed) {
hdd_debug("changed: phy %d, freq %d, width %d",
phy_changed, freq_changed,
width_changed);
wlan_hdd_cm_issue_disconnect(
adapter->deflink,
link_info,
REASON_UNSPEC_FAILURE,
false);
sta_ctx->reg_phymode = csr_phy_mode;
} else {
hdd_debug("Remain on current channel but update tx power");
wlan_reg_update_tx_power_on_ctry_change(
pdev,
adapter->deflink->vdev_id);
pdev,
link_info->vdev_id);
}
break;
default:
break;
}
break;
default:
break;
}
/* dev_put has to be done here */
hdd_adapter_dev_put_debug(adapter, dbgid);
@@ -1797,50 +1802,54 @@ static void hdd_country_change_update_sap(struct hdd_context *hdd_ctx)
qdf_freq_t oper_freq;
eCsrPhyMode csr_phy_mode;
wlan_net_dev_ref_dbgid dbgid = NET_DEV_HOLD_COUNTRY_CHANGE_UPDATE_SAP;
struct wlan_hdd_link_info *link_info;
pdev = hdd_ctx->pdev;
hdd_for_each_adapter_dev_held_safe(hdd_ctx, adapter, next_adapter,
dbgid) {
oper_freq = hdd_get_link_info_home_channel(adapter->deflink);
hdd_adapter_for_each_active_link_info(adapter, link_info) {
oper_freq = hdd_get_link_info_home_channel(link_info);
switch (adapter->device_mode) {
case QDF_P2P_GO_MODE:
policy_mgr_check_sap_restart(hdd_ctx->psoc,
adapter->deflink->vdev_id);
break;
case QDF_SAP_MODE:
if (!test_bit(SOFTAP_INIT_DONE,
&adapter->deflink->link_flags)) {
hdd_info("AP is not started yet");
switch (adapter->device_mode) {
case QDF_P2P_GO_MODE:
policy_mgr_check_sap_restart(hdd_ctx->psoc,
link_info->vdev_id);
break;
}
sap_config = &adapter->deflink->session.ap.sap_config;
reg_phy_mode = csr_convert_to_reg_phy_mode(
sap_config->sap_orig_hw_mode,
oper_freq);
new_phy_mode = wlan_reg_get_max_phymode(pdev,
case QDF_SAP_MODE:
if (!test_bit(SOFTAP_INIT_DONE,
&link_info->link_flags)) {
hdd_info("AP is not started yet");
break;
}
sap_config = &link_info->session.ap.sap_config;
reg_phy_mode = csr_convert_to_reg_phy_mode(
sap_config->sap_orig_hw_mode,
oper_freq);
new_phy_mode = wlan_reg_get_max_phymode(pdev,
reg_phy_mode,
oper_freq);
csr_phy_mode =
csr_convert_from_reg_phy_mode(new_phy_mode);
phy_changed = (csr_phy_mode != sap_config->SapHw_mode);
csr_phy_mode =
csr_convert_from_reg_phy_mode(new_phy_mode);
phy_changed =
(csr_phy_mode != sap_config->SapHw_mode);
if (phy_changed)
hdd_restart_sap_with_new_phymode(hdd_ctx,
adapter,
sap_config,
csr_phy_mode);
else
policy_mgr_check_sap_restart(
hdd_ctx->psoc,
adapter->deflink->vdev_id);
hdd_debug("Update tx power due to ctry change");
wlan_reg_update_tx_power_on_ctry_change(
pdev, adapter->deflink->vdev_id);
break;
default:
break;
if (phy_changed)
hdd_restart_sap_with_new_phymode(hdd_ctx,
adapter,
sap_config,
csr_phy_mode);
else
policy_mgr_check_sap_restart(
hdd_ctx->psoc,
link_info->vdev_id);
hdd_debug("Update tx power due to ctry change");
wlan_reg_update_tx_power_on_ctry_change(
pdev, link_info->vdev_id);
break;
default:
break;
}
}
/* dev_put has to be done here */
hdd_adapter_dev_put_debug(adapter, dbgid);