disp: msm: sde: remove inline prefill properties

Don't expose the prefill requirements for inline rotation.
These values are not used within the driver, so move these
settings to user-space.

Change-Id: Ie1038c5804047fafe0ee3129b993d83d4d31b386
Signed-off-by: Steve Cohen <[email protected]>

msm/sde/sde_hw_catalog.c

@@ -1271,12 +1271,6 @@ static void _sde_sspp_setup_vig(struct sde_mdss_cfg *sde_cfg,
 			sde_cfg->true_inline_dwnscale_nrt;
 		sblk->in_rot_maxheight =
 			MAX_PRE_ROT_HEIGHT_INLINE_ROT_DEFAULT;
-		sblk->in_rot_prefill_fudge_lines =
-			sde_cfg->true_inline_prefill_fudge_lines;
-		sblk->in_rot_prefill_lines_nv12 =
-			sde_cfg->true_inline_prefill_lines_nv12;
-		sblk->in_rot_prefill_lines =
-			sde_cfg->true_inline_prefill_lines;
 	}
 
 	if (IS_SDE_INLINE_ROT_REV_200(sde_cfg->true_inline_rot_rev)) {
@@ -4327,9 +4321,6 @@ static int _sde_hardware_pre_caps(struct sde_mdss_cfg *sde_cfg, uint32_t hw_rev)
 			MAX_DOWNSCALE_RATIO_INROT_NOPD_RT_DENOMINATOR;
 		sde_cfg->true_inline_dwnscale_nrt =
 			MAX_DOWNSCALE_RATIO_INROT_NRT_DEFAULT;
-		sde_cfg->true_inline_prefill_fudge_lines = 2;
-		sde_cfg->true_inline_prefill_lines_nv12 = 32;
-		sde_cfg->true_inline_prefill_lines = 48;
 		sde_cfg->uidle_cfg.uidle_rev = SDE_UIDLE_VERSION_1_0_0;
 		sde_cfg->inline_disable_const_clr = true;
 	} else if (IS_SAIPAN_TARGET(hw_rev)) {
@@ -4358,9 +4349,6 @@ static int _sde_hardware_pre_caps(struct sde_mdss_cfg *sde_cfg, uint32_t hw_rev)
 			MAX_DOWNSCALE_RATIO_INROT_NOPD_RT_DENOMINATOR;
 		sde_cfg->true_inline_dwnscale_nrt =
 			MAX_DOWNSCALE_RATIO_INROT_NRT_DEFAULT;
-		sde_cfg->true_inline_prefill_fudge_lines = 2;
-		sde_cfg->true_inline_prefill_lines_nv12 = 32;
-		sde_cfg->true_inline_prefill_lines = 48;
 		sde_cfg->inline_disable_const_clr = true;
 	} else if (IS_SDMTRINKET_TARGET(hw_rev)) {
 		sde_cfg->has_cwb_support = true;
@@ -4414,9 +4402,6 @@ static int _sde_hardware_pre_caps(struct sde_mdss_cfg *sde_cfg, uint32_t hw_rev)
 				MAX_DOWNSCALE_RATIO_INROT_PD_RT_DENOMINATOR;
 		sde_cfg->true_inline_dwnscale_nrt =
 				MAX_DOWNSCALE_RATIO_INROT_NRT_DEFAULT;
-		sde_cfg->true_inline_prefill_fudge_lines = 2;
-		sde_cfg->true_inline_prefill_lines_nv12 = 32;
-		sde_cfg->true_inline_prefill_lines = 48;
 		sde_cfg->uidle_cfg.uidle_rev = SDE_UIDLE_VERSION_1_0_0;
 		sde_cfg->vbif_disable_inner_outer_shareable = true;
 	} else {

msm/sde/sde_hw_catalog.h

@@ -627,9 +627,6 @@ struct sde_qos_lut_tbl {
  * @in_rot_minpredwnscale_num: min downscale ratio to enable pre-downscale
  * @in_rot_minpredwnscale_denom: min downscale ratio to enable pre-downscale
  * @in_rot_maxheight: max pre rotated height for inline rotation
- * @in_rot_prefill_fudge_lines: prefill fudge lines for inline rotation
- * @in_rot_prefill_lines_mv12: prefill lines for nv12 format inline rotation
- * @in_rot_prefill_lines: prefill lines for inline rotation
  * @llcc_scid: scid for the system cache
  * @llcc_slice size: slice size of the system cache
  */
@@ -668,9 +665,6 @@ struct sde_sspp_sub_blks {
 	u32 in_rot_minpredwnscale_num;
 	u32 in_rot_minpredwnscale_denom;
 	u32 in_rot_maxheight;
-	u32 in_rot_prefill_fudge_lines;
-	u32 in_rot_prefill_lines_nv12;
-	u32 in_rot_prefill_lines;
 	int llcc_scid;
 	size_t llcc_slice_size;
 };
@@ -1282,9 +1276,6 @@ struct sde_limit_cfg {
  * @true_inline_dwnscale_rt_denom    true inline rot downscale ratio for rt
  *                                       - denominator
  * @true_inline_dwnscale_nrt    true inline rotator downscale ratio for nrt
- * @true_inline_prefill_fudge_lines    true inline rotator prefill fudge lines
- * @true_inline_prefill_lines_nv12    true inline prefill lines for nv12 format
- * @true_inline_prefill_lines    true inline prefill lines
  * @macrotile_mode     UBWC parameter for macro tile channel distribution
  * @pipe_order_type    indicate if it is required to specify pipe order
  * @delay_prg_fetch_start indicates if throttling the fetch start is required
@@ -1345,9 +1336,6 @@ struct sde_mdss_cfg {
 	u32 true_inline_dwnscale_rt_num;
 	u32 true_inline_dwnscale_rt_denom;
 	u32 true_inline_dwnscale_nrt;
-	u32 true_inline_prefill_fudge_lines;
-	u32 true_inline_prefill_lines_nv12;
-	u32 true_inline_prefill_lines;
 	u32 macrotile_mode;
 	u32 pipe_order_type;
 	bool delay_prg_fetch_start;

msm/sde/sde_plane.c

@@ -3668,12 +3668,6 @@ static void _sde_plane_install_properties(struct drm_plane *plane,
 			psde->pipe_sblk->in_rot_maxdwnscale_nrt);
 		sde_kms_info_add_keyint(info, "true_inline_max_height",
 			psde->pipe_sblk->in_rot_maxheight);
-		sde_kms_info_add_keyint(info, "true_inline_prefill_fudge_lines",
-			psde->pipe_sblk->in_rot_prefill_fudge_lines);
-		sde_kms_info_add_keyint(info, "true_inline_prefill_lines_nv12",
-			psde->pipe_sblk->in_rot_prefill_lines_nv12);
-		sde_kms_info_add_keyint(info, "true_inline_prefill_lines",
-			psde->pipe_sblk->in_rot_prefill_lines);
 
 		inline_rot_fmt_list = psde->pipe_sblk->in_rot_format_list;