qcacmn: Fix wmi extended service ready handling APIs

Add hw_mode_id. HW mode is received in extended service ready.
This will be used to determine FW capability to support multiple radio.
This is used on host to create multiple instantces of pdev on host.
Change mac_phy_cap extract API to get mac_phy_cap based on hw_mode_id
and phy_id

Change-Id: I9a6abdac8799d167828f13bef61b1a1d8c3e9769
CRs-Fixed: 1113888
This commit is contained in:
Kiran Venkatappa
2016-12-26 15:38:06 +05:30
کامیت شده توسط qcabuildsw
والد c8d1c4bccf
کامیت 2b1b0d2492
2فایلهای تغییر یافته به همراه44 افزوده شده و 14 حذف شده

مشاهده پرونده

@@ -12861,6 +12861,9 @@ static QDF_STATUS extract_hw_mode_cap_service_ready_ext_tlv(
param->hw_mode_id = param_buf->hw_mode_caps[hw_mode_idx].hw_mode_id;
param->phy_id_map = param_buf->hw_mode_caps[hw_mode_idx].phy_id_map;
param->hw_mode_config_type =
param_buf->hw_mode_caps[hw_mode_idx].hw_mode_config_type;
return QDF_STATUS_SUCCESS;
}
@@ -12871,37 +12874,61 @@ static QDF_STATUS extract_hw_mode_cap_service_ready_ext_tlv(
* @param evt_buf: pointer to event buffer
* @param param: Pointer to hold evt buf
* @param hw_mode_idx: hw mode idx should be less than num_mode
* @param phy_id: phy id within hw_mode
*
* Return: QDF_STATUS_SUCCESS for success or error code
*/
static QDF_STATUS extract_mac_phy_cap_service_ready_ext_tlv(
wmi_unified_t wmi_handle,
uint8_t *event, uint8_t hw_mode_idx,
uint8_t *event, uint8_t hw_mode_id, uint8_t phy_id,
struct wmi_host_mac_phy_caps *param)
{
WMI_SERVICE_READY_EXT_EVENTID_param_tlvs *param_buf;
WMI_SOC_MAC_PHY_HW_MODE_CAPS *hw_caps;
WMI_MAC_PHY_CAPABILITIES *mac_phy_caps;
WMI_SOC_MAC_PHY_HW_MODE_CAPS *hw_caps;
uint32_t phy_map;
uint8_t hw_idx, phy_idx = 0;
param_buf = (WMI_SERVICE_READY_EXT_EVENTID_param_tlvs *) event;
if (!param_buf)
return -EINVAL;
hw_caps = param_buf->soc_hw_mode_caps;
if (hw_mode_idx >= hw_caps->num_hw_modes)
for (hw_idx = 0; hw_idx < hw_caps->num_hw_modes; hw_idx++) {
if (hw_mode_id == param_buf->hw_mode_caps[hw_idx].hw_mode_id)
break;
phy_map = param_buf->hw_mode_caps[hw_idx].phy_id_map;
while (phy_map) {
phy_map >>= 1;
phy_idx++;
}
}
if (hw_idx == hw_caps->num_hw_modes)
return -EINVAL;
mac_phy_caps = &param_buf->mac_phy_caps[hw_mode_idx];
phy_idx += phy_id;
if (phy_idx >= param_buf->num_mac_phy_caps)
return -EINVAL;
mac_phy_caps = &param_buf->mac_phy_caps[phy_idx];
param->hw_mode_id = mac_phy_caps->hw_mode_id;
param->pdev_id = mac_phy_caps->pdev_id;
param->phy_id = mac_phy_caps->phy_id;
param->supports_11b = mac_phy_caps->supports_11b;
param->supports_11g = mac_phy_caps->supports_11g;
param->supports_11a = mac_phy_caps->supports_11a;
param->supports_11n = mac_phy_caps->supports_11n;
param->supports_11ac = mac_phy_caps->supports_11ac;
param->supports_11ax = mac_phy_caps->supports_11ax;
param->supports_11b =
WMI_SUPPORT_11B_GET(mac_phy_caps->supported_flags);
param->supports_11g =
WMI_SUPPORT_11G_GET(mac_phy_caps->supported_flags);
param->supports_11a =
WMI_SUPPORT_11A_GET(mac_phy_caps->supported_flags);
param->supports_11n =
WMI_SUPPORT_11N_GET(mac_phy_caps->supported_flags);
param->supports_11ac =
WMI_SUPPORT_11AC_GET(mac_phy_caps->supported_flags);
param->supports_11ax =
WMI_SUPPORT_11AX_GET(mac_phy_caps->supported_flags);
param->supported_bands = mac_phy_caps->supported_bands;
param->ampdu_density = mac_phy_caps->ampdu_density;