samsung-sm8650/android_kernel_samsung_sm8650-modules
1
0
Bifurcation 0
Code Tickets Demandes d'ajout Actions Paquets Projets Publications Wiki Activité

qcacmn: Assign enum value to qca_wlan_vendor_config

Parcourir la source 
Due to propagation misses, the enum values are not properly aligned
with the corresponding counterparts in supplicant.

Assign the enum values so as to avoid value mismatch.

Change-Id: I12be6c8a08026797cff507a69d01a4d1df2c44e0
CRs-Fixed: 2015066
Cette révision appartient à :
Selvaraj, Sridhar
2017-03-07 11:02:26 +05:30
révisé par Sandeep Puligilla
Parent 4952a4b326
révision 2a0301a389
1 fichiers modifiés avec 54 ajouts et 42 suppressions
Télécharger le Fichier Patch Télécharger le Fichier des Différences Développer tous les fichiers Réduire tous les fichiers

96
os_if/linux/qca_vendor.h
Voir le fichier

@@ -2256,77 +2256,90 @@ enum qca_ignore_assoc_disallowed {
* @QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR: stats avg. factor
* @QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME: guard time
* @QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT: fine time measurement
* @QCA_WLAN_VENDOR_ATTR_CONF_TX_RATE: Configure maximum TX rate dynamically
* @QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS:
* Configure the number of continuous Beacon Miss
* @QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND:
* Configure the channel avoidance indication
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION:
* Tx aggregation size (8-bit unsigned value)
* Tx aggregation size (8-bit unsigned value)
* @QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION:
* Rx aggregation size (8-bit unsigned value)
* Rx aggregation size (8-bit unsigned value)
* @QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY:
* Non aggregrate/11g sw retry threshold
* Non aggregrate/11g sw retry threshold
* @QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY: aggregrate sw retry threshold
* @QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY: management frame sw retry threshold
* @QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY: control frame sw retry threshold
* @QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY:
* propagation delay for 2G/5G band (units in us)
* Propagation delay for 2G/5G band (units in us)
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT:
* Configure the number of unicast TX fail packet count
* @QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES: Update the default scan IEs
* @QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND:
* Unsigned 32-bit value attribute for generic commands
* Unsigned 32-bit value attribute for generic commands
* @QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE:
* Unsigned 32-bit data attribute for generic command response
* @QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA:
* Unsigned 32-bit data attribute for generic command response
* @QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH:
* Unsigned 32-bit length attribute for
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
* Unsigned 32-bit length attribute for
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
* @QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS:
* Unsigned 32-bit flags attribute for QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
* Unsigned 32-bit flags attribute for
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
* @QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY: Vendor IE access policy
* @QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST: Vendor IE to be used
* with access policy
* @QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX: interface index for vdev specific
* parameters
* @QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER: Unsigned 8bit length attribute to update
* power save config to turn off/on qpower
* @QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED: Ignore Assoc Disallowed
* [MBO]
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT: Unsigned 32-bit value to
* configure the number of unicast TX fail packet count.
* The peer is disconnected once this threshold is reached.
* @QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST:
* Vendor IE to be used with access policy
* @QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX:
* interface index for vdev specific parameters
* @QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER:
* Unsigned 8bit length attribute to update power save config
* to turn off/on qpower
* @QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED:
* Ignore Assoc Disallowed[MBO]
* @QCA_WLAN_VENDOR_ATTR_CONFIG_LAST: last config
* @QCA_WLAN_VENDOR_ATTR_CONFIG_MAX: max config
*/
enum qca_wlan_vendor_config {
QCA_WLAN_VENDOR_ATTR_CONFIG_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_CONFIG_MODULATED_DTIM,
QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR,
QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME,
QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT,
QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS,
QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND,
QCA_WLAN_VENDOR_ATTR_CONFIG_MODULATED_DTIM = 1,
QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR = 2,
QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME = 3,
QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT = 4,
/* Unsigned 16-bit value to configure maximum TX rate dynamically */
QCA_WLAN_VENDOR_ATTR_CONF_TX_RATE = 5,
QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS = 6,
QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND = 7,
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION,
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION,
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION = 8,
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION = 9,
/* 8-bit unsigned value to configure the Non aggregrate/11g sw
* retry threshold (0 disable, 31 max).
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY,
QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY = 10,
/* 8-bit unsigned value to configure the aggregrate sw
* retry threshold (0 disable, 31 max).
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY,
QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY = 11,
/* 8-bit unsigned value to configure the MGMT frame
* retry threshold (0 disable, 31 max).
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY,
QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY = 12,
/* 8-bit unsigned value to configure the CTRL frame
* retry threshold (0 disable, 31 max).
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY,
QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY = 13,
/* 8-bit unsigned value to configure the propagation delay for
* 2G/5G band (0~63, units in us)
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY,
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY = 14,
/* Unsigned 32-bit value to configure the number of unicast TX fail
* packet count. The peer is disconnected once this threshold is
* reached.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT = 15,
/* Attribute used to set scan default IEs to the driver.
*
* These IEs can be used by scan operations that will be initiated by
@@ -2338,42 +2351,41 @@ enum qca_wlan_vendor_config {
* present in the scan request, then that IE should be added to the IEs
* sent in the Probe Request frames for that scan request.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES,
QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES = 16,
/* Unsigned 32-bit attribute for generic commands */
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND,
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND = 17,
/* Unsigned 32-bit value attribute for generic commands */
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE,
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE = 18,
/* Unsigned 32-bit data attribute for generic command response */
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA,
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA = 19,
/* Unsigned 32-bit length attribute for
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH,
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH = 20,
/* Unsigned 32-bit flags attribute for
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS,
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS = 21,
/* Unsigned 32-bit, defining the access policy.
* See enum qca_access_policy. Used with
* QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY,
QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY = 22,
/* Sets the list of full set of IEs for which a specific access policy
* has to be applied. Used along with
* QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY to control the access.
* Zero length payload can be used to clear this access constraint.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST,
QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST = 23,
/* Unsigned 32-bit, specifies the interface index (netdev) for which the
* corresponding configurations are applied. If the interface index is
* not specified, the configurations are attributed to the respective
* wiphy.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX,
QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX = 24,
/* Unsigned 8-bit, for setting qpower dynamically */
QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER = 25,
QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED = 26,
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT,
/* keep last */
QCA_WLAN_VENDOR_ATTR_CONFIG_LAST,
QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =