Revert "qcacld-3.0: Fix max dwell time for passive scan beacon report"

This reverts Change-Id Idc0b4f15f2b7464507aacfaefb99e1ba48ad1eca.

"qcacld-3.0: Fix max dwell time for passive scan beacon report"
introduced a change to allow some of the RRM parameters to be
controlled by the existing gRrmOperChanMax & gRrmNonOperChanMax INI
items.  However those INI items are obsolete, having been replaced
with rm_capability.  So revert the change, and a subsequent change
will update the default value of rm_capability to correctly solve the
original issue.

Change-Id: Ie67f9f95ea6832a5aec706a8ec0a42ee49b4844c
CRs-Fixed: 1060775

core/hdd/inc/wlan_hdd_cfg.h

@@ -827,13 +827,13 @@ typedef enum {
 
 #define CFG_RRM_OPERATING_CHAN_MAX_DURATION_NAME         "gRrmOperChanMax"      /* section 11.10.3 IEEE std. 802.11k-2008 */
 #define CFG_RRM_OPERATING_CHAN_MAX_DURATION_MIN          (0)    /* Maxduration = 2^(maxDuration - 4) * bcnIntvl. */
-#define CFG_RRM_OPERATING_CHAN_MAX_DURATION_MAX          (7)
-#define CFG_RRM_OPERATING_CHAN_MAX_DURATION_DEFAULT      (4)    /* max duration = 2^0 * bcnIntvl (100% of bcn intvl) */
+#define CFG_RRM_OPERATING_CHAN_MAX_DURATION_MAX          (8)
+#define CFG_RRM_OPERATING_CHAN_MAX_DURATION_DEFAULT      (3)    /* max duration = 2^-1 * bcnIntvl (50% of bcn intvl) */
 
 #define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_NAME     "gRrmNonOperChanMax"   /* Same as above. */
 #define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_MIN      (0)
-#define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_MAX      (7)
-#define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_DEFAULT  (4)
+#define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_MAX      (8)
+#define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_DEFAULT  (3)
 
 #define CFG_RRM_MEAS_RANDOMIZATION_INTVL_NAME            "gRrmRandnIntvl"
 #define CFG_RRM_MEAS_RANDOMIZATION_INTVL_MIN             (10)
@@ -850,7 +850,7 @@ typedef enum {
  * Comma is used as a separator for each byte.
  */
 #define CFG_RM_CAPABILITY_NAME            "rm_capability"
-#define CFG_RM_CAPABILITY_DEFAULT         "73,10,91,00,04"
+#define CFG_RM_CAPABILITY_DEFAULT         "73,10,6D,00,04"
 
 #define CFG_QOS_IMPLICIT_SETUP_ENABLED_NAME                 "ImplicitQosIsEnabled"
 #define CFG_QOS_IMPLICIT_SETUP_ENABLED_MIN                  (0)

core/hdd/src/wlan_hdd_cfg.c

@@ -6937,18 +6937,6 @@ QDF_STATUS hdd_set_sme_config(hdd_context_t *pHddCtx)
 	hdd_hex_string_to_u8_array(pConfig->rm_capability,
 			smeConfig->rrmConfig.rm_capability, &rrm_capab_len,
 			DOT11F_IE_RRMENABLEDCAP_MAX_LEN);
-	/*
-	 * Update the INI values gRrmOperChanMax and gRrmNonOperChanMax
-	 * appropriately
-	 */
-	smeConfig->rrmConfig.rm_capability[2] =
-		((pConfig->nOutChanMeasMaxDuration <<
-		  CAP_NONOPER_CHAN_MAX_DURATION_OFFSET) |
-		 (pConfig->nOutChanMeasMaxDuration <<
-		  CAP_OPER_CHAN_MAX_DURATION_OFFSET) |
-		 (smeConfig->rrmConfig.rm_capability[2] &
-		  (RM_CAP_RM_MIB | RM_CAP_AP_CHAN_REPORT)));
-
 	/* Remaining config params not obtained from registry
 	 * On RF EVB beacon using channel 1.
 	 */

core/mac/src/pe/include/rrm_global.h

@@ -225,8 +225,6 @@ typedef struct sRrmPEContext {
 #define RCPI_MAX_VALUE        (220)
 #define CALCULATE_RCPI(rssi)  (((rssi) + 110) * 2)
 
-#define CAP_OPER_CHAN_MAX_DURATION_OFFSET 2
-#define CAP_NONOPER_CHAN_MAX_DURATION_OFFSET 5
 /* Bit mask are defined as per Draft P802.11REVmc_D4.2 */
 
 /**

core/mac/src/pe/rrm/rrm_api.c

@@ -1301,8 +1301,8 @@ tSirRetStatus rrm_initialize(tpAniSirGlobal pMac)
 	pRRMCaps->fine_time_meas_rpt = 1;
 	pRRMCaps->lci_capability = 1;
 
-	pRRMCaps->operatingChanMax = 4;
-	pRRMCaps->nonOperatingChanMax = 4;
+	pRRMCaps->operatingChanMax = 3;
+	pRRMCaps->nonOperatingChanMax = 3;
 
 	return eSIR_SUCCESS;
 }