qcacmn: Add hang reason codes to QCA_NL80211_VENDOR_SUBCMD_HANG

Add more hang reason codes for the hang reason in the
QCA_NL80211_VENDOR_SUBCMD_HANG events. This also introduces the
attribute QCA_WLAN_VENDOR_ATTR_HANG_REASON_DATA to carry the required
data for the respective hang reason. This data is expected to contain
the required dump to analyze the reason for the hang

Change-Id: I4912f896d394667055937faf68c9ceb32a469978
CRs-Fixed: 2650292

os_if/linux/qca_vendor.h

@@ -668,6 +668,39 @@ enum qca_wlan_vendor_hang_reason {
 	QCA_WLAN_HANG_DXE_FAILURE = 12,
 	/* WMI pending commands exceed the maximum count */
 	QCA_WLAN_HANG_WMI_EXCEED_MAX_PENDING_CMDS = 13,
+	/* Timeout for peer STA connection accept command's response from the
+	 * FW in AP mode. This command is triggered when a STA (peer) connects
+	 * to AP (DUT).
+	 */
+	QCA_WLAN_HANG_AP_STA_CONNECT_REQ_TIMEOUT = 14,
+	/* Timeout for the AP connection accept command's response from the FW
+	 * in STA mode. This command is triggered when the STA (DUT) connects
+	 * to an AP (peer).
+	 */
+	QCA_WLAN_HANG_STA_AP_CONNECT_REQ_TIMEOUT = 15,
+	/* Timeout waiting for the response to the MAC HW mode change command
+	 * sent to FW as a part of MAC mode switch among DBS (Dual Band
+	 * Simultaneous), SCC (Single Channel Concurrency), and MCC (Multi
+	 * Channel Concurrency) mode.
+	 */
+	QCA_WLAN_HANG_MAC_HW_MODE_CHANGE_TIMEOUT = 16,
+	/* Timeout waiting for the response from FW to configure the MAC HW's
+	 * mode. This operation is to configure the single/two MACs in either
+	 * SCC/MCC/DBS mode.
+	 */
+	QCA_WLAN_HANG_MAC_HW_MODE_CONFIG_TIMEOUT = 17,
+	/* Timeout waiting for response of VDEV start command from the FW */
+	QCA_WLAN_HANG_VDEV_START_RESPONSE_TIMED_OUT = 18,
+	/* Timeout waiting for response of VDEV restart command from the FW */
+	QCA_WLAN_HANG_VDEV_RESTART_RESPONSE_TIMED_OUT = 19,
+	/* Timeout waiting for response of VDEV stop command from the FW */
+	QCA_WLAN_HANG_VDEV_STOP_RESPONSE_TIMED_OUT = 20,
+	/* Timeout waiting for response of VDEV delete command from the FW */
+	QCA_WLAN_HANG_VDEV_DELETE_RESPONSE_TIMED_OUT = 21,
+	/* Timeout waiting for response of peer all delete request command to
+	 * the FW on a specific VDEV.
+	 */
+	QCA_WLAN_HANG_VDEV_PEER_DELETE_ALL_RESPONSE_TIMED_OUT = 22,
 };
 
 /**
@@ -681,7 +714,12 @@ enum qca_wlan_vendor_attr_hang {
 	 * qca_wlan_vendor_hang_reason.
 	 */
 	QCA_WLAN_VENDOR_ATTR_HANG_REASON = 1,
-
+	/* The binary blob data associated with the hang reason specified by
+	 * QCA_WLAN_VENDOR_ATTR_HANG_REASON. This binary data is expected to
+	 * contain the required dump to analyze the reason for the hang.
+	 * NLA_BINARY attribute, the max size is 1024 bytes.
+	 */
+	QCA_WLAN_VENDOR_ATTR_HANG_REASON_DATA = 2,
 	QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST,
 	QCA_WLAN_VENDOR_ATTR_HANG_MAX =
 		QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST - 1,