fw-api: CL 4503586 - update fw common interface files

Change-Id: I78be8874ac31e86d3e72f25e074b063ce2e8eca2
WMI: add GRP_MOTION_DET message defs
CRs-Fixed: 1107600

fw/wmi_services.h

@@ -253,6 +253,7 @@ typedef  enum  {
     WMI_SERVICE_VDEV_SWRETRY_PER_AC_CONFIG_SUPPORT=157,  /* Support vdev software retries configuration per AC (non aggr retry/aggr retry) */
     WMI_SERVICE_DUAL_BEACON_ON_SINGLE_MAC_SCC_SUPPORT=158, /* Support dual beacon on same channel on single MAC */
     WMI_SERVICE_DUAL_BEACON_ON_SINGLE_MAC_MCC_SUPPORT=159, /* Support dual beacon on different channel on single MAC */
+    WMI_SERVICE_MOTION_DET=160, /* support for motion detection config */
 
 
     /******* ADD NEW SERVICES HERE *******/

fw/wmi_tlv_defs.h

@@ -916,6 +916,12 @@ typedef enum {
     WMITLV_TAG_STRUC_wmi_get_tpc_power_cmd_fixed_param,
     WMITLV_TAG_STRUC_wmi_get_tpc_power_evt_fixed_param,
     WMITLV_TAG_STRUC_wmi_dma_buf_release_spectral_meta_data,
+    WMITLV_TAG_STRUC_wmi_motion_det_config_params_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_motion_det_base_line_config_params_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_motion_det_start_stop_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_motion_det_base_line_start_stop_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_motion_det_event,
+    WMITLV_TAG_STRUC_wmi_motion_det_base_line_event,
 } WMITLV_TAG_ID;
 
 /*
@@ -1289,6 +1295,10 @@ typedef enum {
     OP(WMI_PEER_TID_CONFIGURATIONS_CMDID) \
     OP(WMI_VDEV_SET_CUSTOM_SW_RETRY_TH_CMDID) \
     OP(WMI_GET_TPC_POWER_CMDID) \
+    OP(WMI_MOTION_DET_CONFIG_PARAM_CMDID) \
+    OP(WMI_MOTION_DET_BASE_LINE_CONFIG_PARAM_CMDID) \
+    OP(WMI_MOTION_DET_START_STOP_CMDID) \
+    OP(WMI_MOTION_DET_BASE_LINE_START_STOP_CMDID) \
     /* add new CMD_LIST elements above this line */
 
 
@@ -1496,6 +1506,8 @@ typedef enum {
     OP(WMI_TWT_RESUME_DIALOG_COMPLETE_EVENTID) \
     OP(WMI_ROAM_SCAN_STATS_EVENTID) \
     OP(WMI_GET_TPC_POWER_EVENTID) \
+    OP(WMI_MOTION_DET_HOST_EVENTID) \
+    OP(WMI_MOTION_DET_BASE_LINE_HOST_EVENTID) \
     /* add new EVT_LIST elements above this line */
 
 
@@ -3649,6 +3661,23 @@ WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_BTM_CONFIG_CMDID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_wlm_config_cmd_fixed_param, wmi_wlm_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
 WMITLV_CREATE_PARAM_STRUC(WMI_WLM_CONFIG_CMDID);
 
+/* Motion detection cmd */
+#define WMITLV_TABLE_WMI_MOTION_DET_CONFIG_PARAM_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_motion_det_config_params_cmd_fixed_param, wmi_motion_det_config_params_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MOTION_DET_CONFIG_PARAM_CMDID);
+
+#define WMITLV_TABLE_WMI_MOTION_DET_BASE_LINE_CONFIG_PARAM_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_motion_det_base_line_config_params_cmd_fixed_param, wmi_motion_det_base_line_config_params_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MOTION_DET_BASE_LINE_CONFIG_PARAM_CMDID);
+
+#define WMITLV_TABLE_WMI_MOTION_DET_START_STOP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_motion_det_start_stop_cmd_fixed_param, wmi_motion_det_start_stop_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MOTION_DET_START_STOP_CMDID);
+
+#define WMITLV_TABLE_WMI_MOTION_DET_BASE_LINE_START_STOP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_motion_det_base_line_start_stop_cmd_fixed_param, wmi_motion_det_base_line_start_stop_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MOTION_DET_BASE_LINE_START_STOP_CMDID);
+
 /* Pdev Set AC TX Queue Optimized Cmd */
 #define WMITLV_TABLE_WMI_PDEV_SET_AC_TX_QUEUE_OPTIMIZED_CMDID(id,op,buf,len) \
   WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_set_ac_tx_queue_optimized_cmd_fixed_param, wmi_pdev_set_ac_tx_queue_optimized_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
@@ -3982,7 +4011,9 @@ WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_SYNCH_FRAME_EVENTID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_hb_ind_event_fixed_param, hb_indevt, WMITLV_SIZE_VAR) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param, wow_gtkigtk, WMITLV_SIZE_VAR) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_oic_ping_handoff_event, wow_oic_ping_handoff, WMITLV_SIZE_VAR) \
-    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dhcp_lease_renew_event, wow_dhcp_lease_renew, WMITLV_SIZE_VAR)
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dhcp_lease_renew_event, wow_dhcp_lease_renew, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_motion_det_event, md_indevt, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_motion_det_base_line_event, bl_indevt, WMITLV_SIZE_VAR)
 WMITLV_CREATE_PARAM_STRUC(WMI_WOW_WAKEUP_HOST_EVENTID);
 
 #define WMITLV_TABLE_WMI_WOW_INITIAL_WAKEUP_EVENTID(id,op,buf,len) \
@@ -4996,6 +5027,14 @@ WMITLV_CREATE_PARAM_STRUC(WMI_TWT_RESUME_DIALOG_COMPLETE_EVENTID);
   WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, rssi, WMITLV_SIZE_VAR)
 WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_SCAN_STATS_EVENTID);
 
+/* Motion detection events */
+#define WMITLV_TABLE_WMI_MOTION_DET_HOST_EVENTID(id,op,buf,len) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_motion_det_event, wmi_motion_det_event, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MOTION_DET_HOST_EVENTID);
+
+#define WMITLV_TABLE_WMI_MOTION_DET_BASE_LINE_HOST_EVENTID(id,op,buf,len) \
+WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_motion_det_base_line_event, wmi_motion_det_base_line_event, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_MOTION_DET_BASE_LINE_HOST_EVENTID);
 
 #ifdef __cplusplus
 }

fw/wmi_unified.h

@@ -243,6 +243,7 @@ typedef enum {
     WMI_GRP_WLM,            /* 0x3c WLAN Latency Manager */
     WMI_GRP_11K_OFFLOAD,    /* 0x3d */
     WMI_GRP_TWT,            /* 0x3e TWT (Target Wake Time) for STA and AP */
+    WMI_GRP_MOTION_DET,     /* 0x3f */
 } WMI_GRP_ID;
 
 #define WMI_CMD_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
@@ -1132,6 +1133,12 @@ typedef enum {
     WMI_TWT_DEL_DIALOG_CMDID,
     WMI_TWT_PAUSE_DIALOG_CMDID,
     WMI_TWT_RESUME_DIALOG_CMDID,
+
+    /** WMI commands related to motion detection **/
+    WMI_MOTION_DET_CONFIG_PARAM_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_MOTION_DET),
+    WMI_MOTION_DET_BASE_LINE_CONFIG_PARAM_CMDID,
+    WMI_MOTION_DET_START_STOP_CMDID,
+    WMI_MOTION_DET_BASE_LINE_START_STOP_CMDID,
 } WMI_CMD_ID;
 
 typedef enum {
@@ -1689,6 +1696,10 @@ typedef enum {
     WMI_NDP_END_INDICATION_EVENTID,
     WMI_WLAN_COEX_BT_ACTIVITY_EVENTID,
     WMI_NDL_SCHEDULE_UPDATE_EVENTID,
+
+    /** WMI events related to motion detection */
+    WMI_MOTION_DET_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MOTION_DET),
+    WMI_MOTION_DET_BASE_LINE_HOST_EVENTID,
 } WMI_EVT_ID;
 
 /* defines for OEM message sub-types */
@@ -11837,6 +11848,8 @@ typedef enum wake_reason_e {
     WOW_REASON_SAP_OBSS_DETECTION,
     WOW_REASON_BSS_COLOR_COLLISION_DETECT,
     WOW_REASON_TKIP_MIC_ERR_FRAME_RECVD_DETECT,
+    WOW_REASON_WLAN_MD, /* motion detected */
+    WOW_REASON_WLAN_BL, /* baselining done */
 
     WOW_REASON_DEBUG_TEST = 0xFF,
 } WOW_WAKE_REASON_TYPE;
@@ -21687,6 +21700,10 @@ static INLINE A_UINT8 *wmi_id_to_name(A_UINT32 wmi_command)
         WMI_RETURN_STRING(WMI_PEER_TID_CONFIGURATIONS_CMDID);
         WMI_RETURN_STRING(WMI_VDEV_SET_CUSTOM_SW_RETRY_TH_CMDID);
         WMI_RETURN_STRING(WMI_GET_TPC_POWER_CMDID);
+        WMI_RETURN_STRING(WMI_MOTION_DET_CONFIG_PARAM_CMDID);
+        WMI_RETURN_STRING(WMI_MOTION_DET_BASE_LINE_CONFIG_PARAM_CMDID);
+        WMI_RETURN_STRING(WMI_MOTION_DET_START_STOP_CMDID);
+        WMI_RETURN_STRING(WMI_MOTION_DET_BASE_LINE_START_STOP_CMDID);
     }
 
     return "Invalid WMI cmd";
@@ -22755,6 +22772,117 @@ typedef struct {
     A_INT32  tx_power;      /* TX power for the specified HALPHY parameters in half dBm unit */
 } wmi_get_tpc_power_evt_fixed_param;
 
+/* below structures are related to Motion Detection. */
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_motion_det_config_params_cmd_fixed_param */
+    A_UINT32 tlv_header;         /** TLV Header */
+    A_UINT32 vdev_id;            /** Vdev ID */
+    A_UINT32 time_t1;            /** Time gap of successive bursts of
+                                  * measurement frames during coarse
+                                  * motion detection (in ms) */
+    A_UINT32 time_t2;            /** Time gap of successive bursts of
+                                  * measurement frames during fine
+                                  * motion detection (in ms) */
+    A_UINT32 n1;                 /** number of measurement frames in one
+                                  * burst, for coarse detection */
+    A_UINT32 n2;                 /** number of measurement frames in one
+                                  * burst, for fine detection */
+    A_UINT32 time_t1_gap;        /** gap between measurement frames in
+                                  * course detection (in ms) */
+    A_UINT32 time_t2_gap;        /** gap between measurement frames in
+                                  * fine detection (in ms) */
+    A_UINT32 coarse_K;           /** number of times motion detection has to
+                                  * be performed for coarse detection */
+    A_UINT32 fine_K;             /** number of times motion detection has to
+                                  * be performed for fine detection */
+    A_UINT32 coarse_Q;           /** number of times motion is expected
+                                  * to be detected for success case in
+                                  * coarse detection */
+    A_UINT32 fine_Q;             /** number of times motion is expected
+                                  * to be detected for success case in
+                                  * fine detection */
+    A_UINT32 md_coarse_thr_high; /** higher threshold value (in percent)
+                                  * from host to FW, which will be used in
+                                  * coarse detection phase of motion detection.
+                                  * This is the threshold for the correlation
+                                  * of the old RF local-scattering environment
+                                  * with the current RF local-scattering
+                                  * environment.  A value of 100(%) indicates
+                                  * that neither the transceiver nor any
+                                  * nearby objects have changed position. */
+    A_UINT32 md_fine_thr_high;   /** higher threshold value (in percent)
+                                  * from host to FW, which will be used in
+                                  * fine detection phase of motion detection.
+                                  * This is the threshold for correlation
+                                  * between the old and current RF environments,
+                                  * as explained above. */
+    A_UINT32 md_coarse_thr_low;  /** lower threshold value (in percent)
+                                  * for immediate detection of motion in
+                                  * coarse detection phase.
+                                  * This is the threshold for correlation
+                                  * between the old and current RF environments,
+                                  * as explained above. */
+    A_UINT32 md_fine_thr_low;    /** lower threshold value (in percent)
+                                  * for immediate detection of motion in
+                                  * fine detection phase.
+                                  * This is the threshold for correlation
+                                  * between the old and current RF environments,
+                                  * as explained above. */
+} wmi_motion_det_config_params_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_motion_det_base_line_config_params_cmd_fixed_param */
+    A_UINT32 tlv_header;    /** TLV Header */
+    A_UINT32 vdev_id;       /** Vdev ID */
+    A_UINT32 bl_time_t;     /** time T for baseline (in ms)
+                             * Every bl_time_t, bl_n packets are sent */
+    A_UINT32 bl_packet_gap; /** gap between measurement frames for baseline
+                             * (in ms) */
+    A_UINT32 bl_n;          /** number of measurement frames to be sent
+                             * during one baseline */
+    A_UINT32 bl_num_meas;   /** number of times the baseline measurement
+                             * to be done */
+} wmi_motion_det_base_line_config_params_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_motion_det_start_stop_cmd_fixed_param */
+    A_UINT32 tlv_header; /** TLV Header */
+    A_UINT32 vdev_id;    /** Vdev ID */
+    A_UINT32 enable;     /** start = 1, stop =0 */
+} wmi_motion_det_start_stop_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_motion_det_base_line_start_stop_cmd_fixed_param */
+    A_UINT32 tlv_header; /** TLV Header */
+    A_UINT32 vdev_id;    /** Vdev ID */
+    A_UINT32 enable;     /** start = 1, stop =0 */
+} wmi_motion_det_base_line_start_stop_cmd_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_motion_det_event */
+    A_UINT32 tlv_header; /** TLV Header */
+    A_UINT32 vdev_id;    /** Vdev ID */
+    A_UINT32 status;     /** status = 1 -> motion detected */
+} wmi_motion_det_event;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+     *  WMITLV_TAG_STRUC_wmi_motion_det_base_line_event */
+    A_UINT32 tlv_header;           /** TLV Header */
+    A_UINT32 vdev_id;              /** Vdev ID */
+    A_UINT32 bl_baseline_value;    /** baseline correlation value calculated
+                                    * during baselining phase (in %) */
+    A_UINT32 bl_max_corr_reserved; /** max corr value obtained during baselining
+                                    * phase (in %); reserved for future */
+    A_UINT32 bl_min_corr_reserved; /** min corr value obtained during baselining
+                                    * phase (in %); reserved for future */
+} wmi_motion_det_base_line_event;
+
 
 /* ADD NEW DEFS HERE */
 

fw/wmi_version.h

@@ -36,7 +36,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 533
+#define __WMI_REVISION_ 534
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work