qcacmn: Fix double unmap issue for rx frag packets

Currently as part of rx frag packets handling, nbuf is unmapped,
but the corresponding rx desc unmapped bit is not set. The fragment
is stored until all the frags are received. Only after all the frags
are received defrag packet is reinjected back to reo. While in between
if driver is unloaded, as part of unload rx desc buffer pool is freed.
During buffer free corresponding rx desc unmapped bit is checked and
if the bit is not set buffer is unampped and then freed. This leads
of double unmap in case of the stored frag list buffers. As part of
this change set the unmapped bit during nbuf unmap.

Change-Id: I24cf1e88f3102bc985f95d2dc325509308a7bef9
CRs-Fixed: 2532302

dp/wifi3.0/dp_rx_defrag.c

@@ -1017,6 +1017,7 @@ dp_rx_defrag_nwifi_to_8023(qdf_nbuf_t nbuf, uint16_t hdrsize)
 	hal_ring_desc_t dst_ring_desc =
 		peer->rx_tid[tid].dst_ring_desc;
 	hal_ring_handle_t hal_srng = soc->reo_reinject_ring.hal_srng;
+	struct dp_rx_desc *rx_desc = peer->rx_tid[tid].head_frag_desc;
 
 	ent_ring_desc = hal_srng_src_get_next(soc->hal_soc, hal_srng);
 	if (!ent_ring_desc) {
@@ -1071,14 +1072,20 @@ dp_rx_defrag_nwifi_to_8023(qdf_nbuf_t nbuf, uint16_t hdrsize)
 
 	/* map the nbuf before reinject it into HW */
 	ret = qdf_nbuf_map_single(soc->osdev, head,
-					QDF_DMA_FROM_DEVICE);
-
+				  QDF_DMA_FROM_DEVICE);
 	if (qdf_unlikely(ret == QDF_STATUS_E_FAILURE)) {
 		QDF_TRACE(QDF_MODULE_ID_DP, QDF_TRACE_LEVEL_ERROR,
 				"%s: nbuf map failed !", __func__);
 		return QDF_STATUS_E_FAILURE;
 	}
 
+	/*
+	 * As part of rx frag handler bufffer was unmapped and rx desc
+	 * unmapped is set to 1. So again for defrag reinject frame reset
+	 * it back to 0.
+	 */
+	rx_desc->unmapped = 0;
+
 	dp_ipa_handle_rx_buf_smmu_mapping(soc, head, true);
 
 	paddr = qdf_nbuf_get_frag_paddr(head, 0);
@@ -1686,6 +1693,7 @@ uint32_t dp_rx_frag_handle(struct dp_soc *soc, hal_ring_desc_t ring_desc,
 	msdu = rx_desc->nbuf;
 
 	qdf_nbuf_unmap_single(soc->osdev, msdu,	QDF_DMA_FROM_DEVICE);
+	rx_desc->unmapped = 1;
 
 	rx_desc->rx_buf_start = qdf_nbuf_data(msdu);