qcacmn: Add new feature to support protocol tags

With this feature, using appropriate commands, link layer, network layer,
transport layer and some of the application protocols can be tagged with
the user provided tag values for easier identification of protocols. The
supported protocols today are as follows.

ARP, DHCPv4, DHCPv6, DNS over TCP (v4), DNS over TCP (v6), DNS over UDP
(v4), DNS over UDP (v6), ICMPv4, ICMPv6, TCPv4, TCPv6, UDPv4,
UDPv6, IPv4, IPv6, EAP.

Receive packets are tagged by hardware. Tags are applied after the first
matching rule. Hence it is recommended that the rules are
programmed in such a way that tags are configured from application layer
to data link layer to get expected results.

Change-Id: Ibdc2bd2b78234f482074955e89fb93f05988eaca

hal/wifi3.0/hal_generic_api.h

@@ -1233,8 +1233,12 @@ hal_rx_status_get_tlv_info_generic(void *rx_tlv_hdr, void *ppduinfo,
 
 		filter_category = HAL_RX_GET(rx_mpdu_start, RX_MPDU_INFO_0,
 							RXPCU_MPDU_FILTER_IN_CATEGORY);
-		if (filter_category == 1)
+
+		if (filter_category == 0)
+			ppdu_info->rx_status.rxpcu_filter_pass = 1;
+		else if (filter_category == 1)
 			ppdu_info->rx_status.monitor_direct_used = 1;
+
 		break;
 	}
 	case WIFIRX_MPDU_END_E:

hal/wifi3.0/hal_rx.h

@@ -852,6 +852,29 @@ hal_rx_attn_phy_ppdu_id_get(uint8_t *buf)
 	return phy_ppdu_id;
 }
 
+#define HAL_RX_ATTN_CCE_MATCH_GET(_rx_attn)		\
+	(_HAL_MS((*_OFFSET_TO_WORD_PTR(_rx_attn,	\
+		RX_ATTENTION_1_CCE_MATCH_OFFSET)),		\
+		RX_ATTENTION_1_CCE_MATCH_MASK,			\
+		RX_ATTENTION_1_CCE_MATCH_LSB))
+
+/*
+ * hal_rx_msdu_cce_match_get(): get CCE match bit
+ * from rx attention
+ * @buf: pointer to rx_pkt_tlvs
+ * Return: CCE match value
+ */
+static inline bool
+hal_rx_msdu_cce_match_get(uint8_t *buf)
+{
+	struct rx_pkt_tlvs *pkt_tlvs = (struct rx_pkt_tlvs *)buf;
+	struct rx_attention *rx_attn = &pkt_tlvs->attn_tlv.rx_attn;
+	bool cce_match_val;
+
+	cce_match_val = HAL_RX_ATTN_CCE_MATCH_GET(rx_attn);
+	return cce_match_val;
+}
+
 /*
  * Get peer_meta_data from RX_MPDU_INFO within RX_MPDU_START
  */
@@ -1863,6 +1886,31 @@ hal_rx_msdu_end_last_msdu_get(uint8_t *buf)
 
 	return last_msdu;
 }
+
+#define HAL_RX_MSDU_END_CCE_METADATA_GET(_rx_msdu_end)	\
+	(_HAL_MS((*_OFFSET_TO_WORD_PTR(_rx_msdu_end,	\
+		RX_MSDU_END_16_CCE_METADATA_OFFSET)),	\
+		RX_MSDU_END_16_CCE_METADATA_MASK,		\
+		RX_MSDU_END_16_CCE_METADATA_LSB))
+
+/**
+ * hal_rx_msdu_cce_metadata_get: API to get CCE metadata
+ * from rx_msdu_end TLV
+ * @ buf: pointer to the start of RX PKT TLV headers
+ * Return: last_msdu
+ */
+
+static inline uint32_t
+hal_rx_msdu_cce_metadata_get(uint8_t *buf)
+{
+	struct rx_pkt_tlvs *pkt_tlvs = (struct rx_pkt_tlvs *)buf;
+	struct rx_msdu_end *msdu_end = &pkt_tlvs->msdu_end_tlv.rx_msdu_end;
+	uint32_t cce_metadata;
+
+	cce_metadata = HAL_RX_MSDU_END_CCE_METADATA_GET(msdu_end);
+	return cce_metadata;
+}
+
 /*******************************************************************************
  * RX ERROR APIS
  ******************************************************************************/
@@ -2697,10 +2745,8 @@ uint16_t hal_rx_get_rx_sequence(uint8_t *buf)
 	struct rx_mpdu_info *rx_mpdu_info = hal_rx_get_mpdu_info(pkt_tlvs);
 	uint16_t seq_number = 0;
 
-	seq_number =
-		HAL_RX_MPDU_GET_SEQUENCE_NUMBER(rx_mpdu_info) >> 4;
+	seq_number = HAL_RX_MPDU_GET_SEQUENCE_NUMBER(rx_mpdu_info);
 
-	/* Skip first 4-bits for fragment number */
 	return seq_number;
 }