fw-api: CL 2942293 - update fw common interface files

Extensions to the WMI coex configuration message

Change-Id: Ifa4a683897837ba0ebde8682fde35580bd504cfd
CRs-Fixed: 1107600

fw/wmi_unified.h

@@ -17556,6 +17556,30 @@ typedef struct {
     A_UINT32 ofdm_level;
 } wmi_ani_ofdm_event_fixed_param;
 
+/* When a bit is set it specifies the particular WLAN traffic type is high priority.
+ * BT low priority traffic has higher priority than WLAN low priority traffic and has
+ * lower priority when compared to WLAN high priority traffic.
+ * BT high priority traffic has higher priority than WLAN low/high priority traffic.
+ */
+#define WMI_PDEV_BE_PRIORITY_BIT     (1<<0)
+#define WMI_PDEV_BK_PRIORITY_BIT     (1<<1)
+#define WMI_PDEV_VI_PRIORITY_BIT     (1<<2)
+#define WMI_PDEV_VO_PRIORITY_BIT     (1<<3)
+#define WMI_PDEV_BEACON_PRIORITY_BIT (1<<4)
+#define WMI_PDEV_MGMT_PRIORITY_BIT   (1<<5)
+#define WMI_PDEV_IS_BE_PRIORITY_SET(val) ((val) & WMI_PDEV_BE_PRIORITY_BIT)
+#define WMI_PDEV_IS_BK_PRIORITY_SET(val) ((val) & WMI_PDEV_BK_PRIORITY_BIT)
+#define WMI_PDEV_IS_VI_PRIORITY_SET(val) ((val) & WMI_PDEV_VI_PRIORITY_BIT)
+#define WMI_PDEV_IS_VO_PRIORITY_SET(val) ((val) & WMI_PDEV_VO_PRIORITY_BIT)
+#define WMI_PDEV_IS_BEACON_PRIORITY_SET(val) ((val) & WMI_PDEV_BEACON_PRIORITY_BIT)
+#define WMI_PDEV_IS_MGMT_PRIORITY_SET(val) ((val) & WMI_PDEV_MGMT_PRIORITY_BIT)
+
+typedef enum wmi_coex_algo_type  {
+    WMI_COEX_ALGO_UNCONS_FREERUN  = 0,
+    WMI_COEX_ALGO_FREERUN         = 1,
+    WMI_COEX_ALGO_OCS             = 2,
+} WMI_COEX_ALGO_TYPE;
+
 typedef enum wmi_coex_config_type {
     WMI_COEX_CONFIG_PAGE_P2P_TDM        =  1, /* config interval (arg1 BT, arg2 WLAN) for P2P + PAGE */
     WMI_COEX_CONFIG_PAGE_STA_TDM        =  2, /* config interval (arg1 BT, arg2 WLAN) for STA + PAGE */
@@ -17570,6 +17594,16 @@ typedef enum wmi_coex_config_type {
     WMI_COEX_CONFIG_INQUIRY_P2P_STA_TDM = 11, /* config interval (ms units) (arg1 BT, arg2 WLAN) for P2P + STA + INQUIRY */
     WMI_COEX_CONFIG_TX_POWER            = 12, /* config wlan total tx power when bt coex (arg1 is wlan_tx_power_limit, in 0.5dbm units) */
     WMI_COEX_CONFIG_PTA_CONFIG          = 13, /* config  whether enable PTA and GPIO number (arg1 is pta_enable, arg2 is GPIO number used as /BT_ACTIVE/BT_PRIORITY/WLAN_DENY,8 bit for each) */
+    WMI_COEX_CONFIG_AP_TDM              = 14, /* config interval (arg1 duty cycle in ms, arg2 WLAN duration in ms) for AP */
+    WMI_COEX_CONFIG_WLAN_SCAN_PRIORITY  = 15, /* config to set WLAN priority during Off Channel Scan */
+    WMI_COEX_CONFIG_WLAN_PKT_PRIORITY   = 16, /* config to set WLAN priority for BE/BK/VO/VI/Beacon/Management frame */
+    WMI_COEX_CONFIG_PTA_INTERFACE       = 17, /* config PTA interface,
+                                                 arg1 PTA num,
+                                                 arg2 mode (2-wire/3-wire/PTA),
+                                                 arg3 first slot time in microsec,
+                                                 arg4 BT priority time in microsec,
+                                                 arg5 PTA algorithm (WMI_COEX_ALGO_TYPE),
+                                                 arg6 PTA priority */
 } WMI_COEX_CONFIG_TYPE;
 
 typedef struct {
@@ -17578,6 +17612,10 @@ typedef struct {
     A_UINT32 config_type; /* wmi_coex_config_type enum */
     A_UINT32 config_arg1;
     A_UINT32 config_arg2;
+    A_UINT32 config_arg3;
+    A_UINT32 config_arg4;
+    A_UINT32 config_arg5;
+    A_UINT32 config_arg6;
 } WMI_COEX_CONFIG_CMD_fixed_param;
 
 /**

fw/wmi_version.h

@@ -36,7 +36,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 370
+#define __WMI_REVISION_ 371
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work