qcacld-3.0: Add vdev_active validation for wmi commands

When the host sends a wmi command with invalid vdev id, firmware
crashes. So to avoid this check the vdev_active flag for the
vdev before sending the wmi command.

This changeset validates the vdev_active check for the following
commands:
WMI_VDEV_CREATE_CMDID
WMI_VDEV_DELETE_CMDID
WMI_VDEV_START_REQUEST_CMDID
WMI_VDEV_RESTART_REQUEST_CMDID
WMI_VDEV_UP_CMDID
WMI_VDEV_STOP_CMDID
WMI_VDEV_DOWN_CMDID
WMI_VDEV_SET_PARAM_CMDID
WMI_VDEV_WMM_ADDTS_CMDID
WMI_VDEV_WMM_DELTS_CMDID

This change also removes the flag is_vdev_valid which seems to
duplicate the vdev_active flag.

Change-Id: If9d4a2b24f8141c26a73f3a012fa99d38b3221bc
CRs Fixed: 2312360

core/wma/src/wma_dev_if.c

@@ -588,7 +588,6 @@ static QDF_STATUS wma_handle_vdev_detach(tp_wma_handle wma_handle,
 		goto out;
 	}
 
-
 	status = wmi_unified_vdev_delete_send(wma_handle->wmi_handle, vdev_id);
 	if (QDF_IS_STATUS_ERROR(status)) {
 		WMA_LOGE("Unable to remove an interface");

core/wma/src/wma_features.c

@@ -3077,6 +3077,12 @@ int wma_pdev_resume_event_handler(void *handle, uint8_t *event, uint32_t len)
  */
 void wma_del_ts_req(tp_wma_handle wma, tDelTsParams *msg)
 {
+	if (!wma_is_vdev_valid(msg->sessionId)) {
+		WMA_LOGE("%s: vdev id:%d is not active ", __func__,
+			 msg->sessionId);
+		qdf_mem_free(msg);
+		return;
+	}
 	if (wmi_unified_del_ts_cmd(wma->wmi_handle,
 				 msg->sessionId,
 				 TID_TO_WME_AC(msg->userPrio))) {
@@ -4368,7 +4374,6 @@ QDF_STATUS wma_process_set_ie_info(tp_wma_handle wma,
 {
 	struct wma_txrx_node *interface;
 	struct vdev_ie_info_param cmd = {0};
-	int ret;
 
 	if (!ie_info || !wma) {
 		WMA_LOGE(FL("input pointer is NULL"));
@@ -4381,17 +4386,12 @@ QDF_STATUS wma_process_set_ie_info(tp_wma_handle wma,
 		return QDF_STATUS_E_INVAL;
 	}
 
-	if (ie_info->vdev_id >= wma->max_bssid) {
-		WMA_LOGE(FL("Invalid vdev_id: %d"), ie_info->vdev_id);
-		return QDF_STATUS_E_INVAL;
-	}
-
-	interface = &wma->interfaces[ie_info->vdev_id];
 	if (!wma_is_vdev_valid(ie_info->vdev_id)) {
 		WMA_LOGE(FL("vdev_id: %d is not active"), ie_info->vdev_id);
 		return QDF_STATUS_E_INVAL;
 	}
 
+	interface = &wma->interfaces[ie_info->vdev_id];
 	cmd.vdev_id = ie_info->vdev_id;
 	cmd.ie_id = ie_info->ie_id;
 	cmd.length = ie_info->length;
@@ -4406,9 +4406,7 @@ QDF_STATUS wma_process_set_ie_info(tp_wma_handle wma,
 	QDF_TRACE_HEX_DUMP(QDF_MODULE_ID_WMA, QDF_TRACE_LEVEL_DEBUG,
 		ie_info->data, ie_info->length);
 
-	ret = wmi_unified_process_set_ie_info_cmd(wma->wmi_handle,
-				   &cmd);
-	return ret;
+	return wmi_unified_process_set_ie_info_cmd(wma->wmi_handle, &cmd);
 }
 
 #ifdef FEATURE_WLAN_APF

core/wma/src/wma_mgmt.c

@@ -1831,8 +1831,10 @@ static QDF_STATUS wma_setup_install_key_cmd(tp_wma_handle wma_handle,
 			key_params->vdev_id);
 		return QDF_STATUS_E_INVAL;
 	}
-	if (key_params->vdev_id >= wma_handle->max_bssid) {
-		WMA_LOGE(FL("Invalid vdev_id: %d"), key_params->vdev_id);
+
+	if (!wma_is_vdev_valid(key_params->vdev_id)) {
+		WMA_LOGE("%s: vdev id:%d is not active ", __func__,
+			 key_params->vdev_id);
 		return QDF_STATUS_E_INVAL;
 	}
 

core/wma/src/wma_utils.c

@@ -2034,8 +2034,9 @@ QDF_STATUS wma_process_ll_stats_get_req(tp_wma_handle wma,
 		return QDF_STATUS_E_FAILURE;
 	}
 
-	if (!wma->interfaces[getReq->staId].vdev_active) {
-		WMA_LOGE("%s: vdev not created yet", __func__);
+	if (!wma_is_vdev_valid(getReq->staId)) {
+		WMA_LOGE("%s: vdev:%d not created yet", __func__,
+			 getReq->staId);
 		return QDF_STATUS_E_FAILURE;
 	}
 
@@ -4379,6 +4380,11 @@ wma_send_vdev_start_to_fw(t_wma_handle *wma, struct vdev_start_params *params)
 	QDF_STATUS status;
 	struct wma_txrx_node *vdev = &wma->interfaces[params->vdev_id];
 
+	if (!wma_is_vdev_valid(params->vdev_id)) {
+		WMA_LOGE("%s: Invalid vdev id:%d", __func__, params->vdev_id);
+		status = QDF_STATUS_E_FAILURE;
+		return status;
+	}
 	wma_acquire_wakelock(&vdev->vdev_start_wakelock,
 			     WMA_VDEV_START_REQUEST_TIMEOUT);
 	status = wmi_unified_vdev_start_send(wma->wmi_handle, params);
@@ -4393,6 +4399,11 @@ QDF_STATUS wma_send_vdev_stop_to_fw(t_wma_handle *wma, uint8_t vdev_id)
 	QDF_STATUS status;
 	struct wma_txrx_node *vdev = &wma->interfaces[vdev_id];
 
+	if (!wma_is_vdev_valid(vdev_id)) {
+		WMA_LOGE("%s: Invalid vdev id:%d", __func__, vdev_id);
+		status = QDF_STATUS_E_FAILURE;
+		return status;
+	}
 	wma_acquire_wakelock(&vdev->vdev_stop_wakelock,
 			     WMA_VDEV_STOP_REQUEST_TIMEOUT);
 	status = wmi_unified_vdev_stop_send(wma->wmi_handle, vdev_id);
@@ -4500,13 +4511,20 @@ QDF_STATUS wma_send_vdev_up_to_fw(t_wma_handle *wma,
 				  uint8_t bssid[IEEE80211_ADDR_LEN])
 {
 	QDF_STATUS status;
-	struct wma_txrx_node *vdev = &wma->interfaces[params->vdev_id];
+	struct wma_txrx_node *vdev;
+
+	if (!wma_is_vdev_valid(params->vdev_id)) {
+		WMA_LOGE("%s: Invalid vdev id:%d", __func__, params->vdev_id);
+		return QDF_STATUS_E_FAILURE;
+	}
 
 	if (wma_is_vdev_up(params->vdev_id)) {
 		WMA_LOGD("vdev %d is already up for bssid %pM. Do not send",
 			 params->vdev_id, bssid);
 		return QDF_STATUS_SUCCESS;
 	}
+
+	vdev = &wma->interfaces[params->vdev_id];
 	status = wmi_unified_vdev_up_send(wma->wmi_handle, bssid, params);
 	wma_release_wakelock(&vdev->vdev_start_wakelock);
 
@@ -4516,8 +4534,14 @@ QDF_STATUS wma_send_vdev_up_to_fw(t_wma_handle *wma,
 QDF_STATUS wma_send_vdev_down_to_fw(t_wma_handle *wma, uint8_t vdev_id)
 {
 	QDF_STATUS status;
-	struct wma_txrx_node *vdev = &wma->interfaces[vdev_id];
+	struct wma_txrx_node *vdev;
+
+	if (!wma_is_vdev_valid(vdev_id)) {
+		WMA_LOGE("%s: Invalid vdev id:%d", __func__, vdev_id);
+		return QDF_STATUS_E_FAILURE;
+	}
 
+	vdev = &wma->interfaces[vdev_id];
 	wma->interfaces[vdev_id].roaming_in_progress = false;
 	status = wmi_unified_vdev_down_send(wma->wmi_handle, vdev_id);
 	wma_release_wakelock(&vdev->vdev_start_wakelock);