qcacld-3.0: CL 1488100 - update fw common interface files

qcacld-2.0 to qcacld-3.0 propagation.

Add support for scenario debug logging
WMI changes to control WISA features of firmware from host.

Change-Id: I01d96c423b6241248242aa2feae6887d8f202691
CRs-Fixed: 865207

target/inc/wmi_tlv_defs.h

@@ -698,6 +698,7 @@ typedef enum {
 	WMITLV_TAG_STRUC_WMI_SOC_MAC_PHY_HW_MODE_CAPS,
 	WMITLV_TAG_STRUC_WMI_HAL_REG_CAPABILITIES_EXT,
 	WMITLV_TAG_STRUC_WMI_SOC_HAL_REG_CAPABILITIES,
+	WMITLV_TAG_STRUC_wmi_vdev_wisa_cmd_fixed_param,
 } WMITLV_TAG_ID;
 
 /*
@@ -979,7 +980,8 @@ typedef enum {
 	OP(WMI_CHAN_AVOID_RPT_ALLOW_CMDID) \
 	OP(WMI_SET_PERIODIC_CHANNEL_STATS_CONFIG_CMDID) \
 	OP(WMI_VDEV_SET_CUSTOM_AGGR_SIZE_CMDID) \
-	OP(WMI_PDEV_WAL_POWER_DEBUG_CMDID)
+	OP(WMI_PDEV_WAL_POWER_DEBUG_CMDID) \
+	OP(WMI_VDEV_WISA_CMDID)
 
 /*
  * IMPORTANT: Please add _ALL_ WMI Events Here.
@@ -2456,6 +2458,10 @@ WMITLV_CREATE_PARAM_STRUC(WMI_TRANSFER_DATA_TO_FLASH_CMDID);
 	WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_config_enhanced_mcast_filter_fixed_param, wmi_config_enhanced_mcast_filter_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
 WMITLV_CREATE_PARAM_STRUC(WMI_CONFIG_ENHANCED_MCAST_FILTER_CMDID);
 
+#define WMITLV_TABLE_WMI_VDEV_WISA_CMDID(id, op, buf, len) \
+	WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_vdev_wisa_cmd_fixed_param, wmi_vdev_wisa_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_WISA_CMDID);
+
 /* MAWC sensor report indication cmd */
 #define WMITLV_TABLE_WMI_MAWC_SENSOR_REPORT_IND_CMDID(id, op, buf, len) \
 	WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_mawc_sensor_report_ind_cmd_fixed_param, wmi_mawc_sensor_report_ind_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)

target/inc/wmi_unified.h

@@ -774,6 +774,9 @@ typedef enum {
 	WMI_TRANSFER_DATA_TO_FLASH_CMDID,
 	/** Command to enable/disable filtering of multicast IP with unicast mac */
 	WMI_CONFIG_ENHANCED_MCAST_FILTER_CMDID,
+	/** Command to control WISA mode */
+	WMI_VDEV_WISA_CMDID,
+
 	/* GPIO Configuration */
 	WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_GPIO),
 	WMI_GPIO_OUTPUT_CMDID,
@@ -8040,6 +8043,7 @@ typedef enum event_type_e {
 	WOW_NAN_DATA_EVENT,
 	WOW_NAN_RTT_EVENT,
 	WOW_TDLS_CONN_TRACKER_EVENT,
+	WOW_CRITICAL_LOG_EVENT,
 } WOW_WAKE_EVENT_TYPE;
 
 typedef enum wake_reason_e {
@@ -8087,6 +8091,7 @@ typedef enum wake_reason_e {
 	WOW_REASON_NAN_DATA,
 	WOW_REASON_NAN_RTT,
 	WOW_REASON_TDLS_CONN_TRACKER_EVENT,
+	WOW_REASON_CRITICAL_LOG,
 	WOW_REASON_DEBUG_TEST = 0xFF,
 } WOW_WAKE_REASON_TYPE;
 
@@ -14521,6 +14526,18 @@ typedef struct {
 	A_UINT32 enable;
 } wmi_config_enhanced_mcast_filter_cmd_fixed_param;
 
+typedef struct {
+	/*
+	 * TLV tag and len; tag equals
+	 * WMITLV_TAG_STRUC_wmi_vdev_wisa_cmd_fixed_param
+	 */
+	A_UINT32 tlv_header;
+	/* unique id identifying the VDEV, generated by the caller */
+	A_UINT32 vdev_id;
+	/* WISA enable / disable mode */
+	A_UINT32 wisa_mode;
+} wmi_vdev_wisa_cmd_fixed_param;
+
 /*
  * This structure is used to report SMPS force mode set complete to host.
  */

target/inc/wmi_version.h

@@ -36,7 +36,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility */
-#define __WMI_REVISION_ 231
+#define __WMI_REVISION_ 233
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work