qcacmn: HAL API changes for beryllium

Add HAL API changes for WCN7850

Change-Id: I1b5cedfee609d539ed03f103bbbc4394efddb0dc
CRs-Fixed: 2891049

hal/wifi3.0/li/hal_li_api.h

@@ -0,0 +1,127 @@
+/*
+ * Copyright (c) 2016-2021 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _HAL_LI_API_H_
+#define _HAL_LI_API_H_
+
+#include "hal_li_hw_headers.h"
+#include "hal_api.h"
+
+/**
+ * hal_reo_setup_generic_li - Initialize HW REO block
+ *
+ * @hal_soc: Opaque HAL SOC handle
+ * @reo_params: parameters needed by HAL for REO config
+ */
+void hal_reo_setup_generic_li(struct hal_soc *soc,
+			      void *reoparams);
+
+/**
+ * hal_set_link_desc_addr_li - Setup link descriptor in a buffer_addr_info
+ * HW structure
+ *
+ * @desc: Descriptor entry (from WBM_IDLE_LINK ring)
+ * @cookie: SW cookie for the buffer/descriptor
+ * @link_desc_paddr: Physical address of link descriptor entry
+ *
+ */
+void hal_set_link_desc_addr_li(void *desc, uint32_t cookie,
+			       qdf_dma_addr_t link_desc_paddr);
+
+/**
+ * hal_tx_desc_set_search_type_generic_li - Set the search type value
+ * @desc: Handle to Tx Descriptor
+ * @search_type: search type
+ *		     0 – Normal search
+ *		     1 – Index based address search
+ *		     2 – Index based flow search
+ *
+ * Return: void
+ */
+void hal_tx_desc_set_search_type_generic_li(void *desc,
+					    uint8_t search_type);
+
+/**
+ * hal_tx_desc_set_search_index_generic_li - Set the search index value
+ * @desc: Handle to Tx Descriptor
+ * @search_index: The index that will be used for index based address or
+ *                flow search. The field is valid when 'search_type' is
+ *                1 0r 2
+ *
+ * Return: void
+ */
+void hal_tx_desc_set_search_index_generic_li(void *desc,
+					     uint32_t search_index);
+
+/**
+ * hal_tx_desc_set_cache_set_num_generic_li - Set the cache-set-num value
+ * @desc: Handle to Tx Descriptor
+ * @cache_num: Cache set number that should be used to cache the index
+ *                based search results, for address and flow search.
+ *                This value should be equal to LSB four bits of the hash value
+ *                of match data, in case of search index points to an entry
+ *                which may be used in content based search also. The value can
+ *                be anything when the entry pointed by search index will not be
+ *                used for content based search.
+ *
+ * Return: void
+ */
+void hal_tx_desc_set_cache_set_num_generic_li(void *desc,
+					      uint8_t cache_num);
+
+/**
+ * hal_tx_init_data_ring_li() - Initialize all the TCL Descriptors in SRNG
+ * @hal_soc_hdl: Handle to HAL SoC structure
+ * @hal_srng: Handle to HAL SRNG structure
+ *
+ * Return: none
+ */
+void hal_tx_init_data_ring_li(hal_soc_handle_t hal_soc_hdl,
+			      hal_ring_handle_t hal_ring_hdl);
+
+/**
+ * hal_hw_txrx_default_ops_attach_li(): Add default ops for Lithium chips
+ * @ hal_soc_hdl: hal_soc handle
+ *
+ * Return: None
+ */
+void hal_hw_txrx_default_ops_attach_li(struct hal_soc *soc);
+
+void hal_rx_wbm_err_info_get_generic_li(void *wbm_desc, void *wbm_er_info1);
+uint32_t hal_rx_wbm_err_src_get_li(hal_ring_desc_t ring_desc);
+uint8_t hal_rx_ret_buf_manager_get_li(hal_ring_desc_t ring_desc);
+void hal_rx_mpdu_desc_info_get_li(void *desc_addr, void *mpdu_desc_info_hdl);
+
+/**
+ * hal_reo_qdesc_setup - Setup HW REO queue descriptor
+ *
+ * @hal_soc: Opaque HAL SOC handle
+ * @ba_window_size: BlockAck window size
+ * @start_seq: Starting sequence number
+ * @hw_qdesc_vaddr: Virtual address of REO queue descriptor memory
+ * @hw_qdesc_paddr: Physical address of REO queue descriptor memory
+ * @pn_type: PN type (one of the types defined in 'enum hal_pn_type')
+ *
+ */
+void hal_reo_qdesc_setup_li(hal_soc_handle_t hal_soc_hdl,
+			    int tid, uint32_t ba_window_size,
+			    uint32_t start_seq, void *hw_qdesc_vaddr,
+			    qdf_dma_addr_t hw_qdesc_paddr,
+			    int pn_type);
+
+#endif /* _HAL_LI_API_H_ */