fw-api: CL 6571150 - update fw common interface files

Change-Id: I235cc527b9a6e851eb8adbcc0b75080dfc1b684d
WMI: add PEER_CFG_CAPTURE_EVENT msg def
CRs-Fixed: 2262693

fw/wmi_services.h

@@ -380,6 +380,7 @@ typedef  enum  {
     WMI_SERVICE_WPA3_FT_SAE_SUPPORT = 195, /* FW roaming support for WPA3_FT_SAE */
     WMI_SERVICE_WPA3_FT_SUITE_B_SUPPORT = 196, /* FW roaming support for WPA3_FT_SUITE_B */
     WMI_SERVICE_VOW_ENABLE=197, /* FW supports a set of features to optimize VoW performance */
+    WMI_SERVICE_CFR_CAPTURE_IND_EVT_TYPE_1 = 198, /* support WMI_PEER_CFR_CAPTURE_EVENT msg */
 
 
     /******* ADD NEW SERVICES HERE *******/

fw/wmi_tlv_defs.h

@@ -965,6 +965,7 @@ typedef enum {
     WMITLV_TAG_STRUC_wmi_request_wlm_stats_cmd_fixed_param,
     WMITLV_TAG_STRUC_wmi_wlm_stats_event_fixed_param,
     WMITLV_TAG_STRUC_wmi_key_material_ext,
+    WMITLV_TAG_STRUC_wmi_peer_cfr_capture_event_fixed_param,
 } WMITLV_TAG_ID;
 
 /*
@@ -1580,6 +1581,7 @@ typedef enum {
     OP(WMI_VDEV_GET_MWS_COEX_IDRX_STATE_EVENTID) \
     OP(WMI_VDEV_GET_MWS_COEX_ANTENNA_SHARING_STATE_EVENTID) \
     OP(WMI_WLM_STATS_EVENTID) \
+    OP(WMI_PEER_CFR_CAPTURE_EVENTID) \
     /* add new EVT_LIST elements above this line */
 
 
@@ -5280,6 +5282,11 @@ WMITLV_CREATE_PARAM_STRUC(WMI_MOTION_DET_BASE_LINE_HOST_EVENTID);
   WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_esp_estimate_event_fixed_param, wmi_esp_estimate_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
 WMITLV_CREATE_PARAM_STRUC(WMI_ESP_ESTIMATE_EVENTID);
 
+/* Peer CFR capture event */
+#define WMITLV_TABLE_WMI_PEER_CFR_CAPTURE_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_cfr_capture_event_fixed_param, wmi_peer_cfr_capture_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_CFR_CAPTURE_EVENTID);
+
 
 #ifdef __cplusplus
 }

fw/wmi_unified.h

@@ -549,8 +549,21 @@ typedef enum {
     WMI_PEER_TID_CONFIGURATIONS_CMDID,
 
     /** Peer configuration for Channel Frequency Response (CFR) capture
-     * of type wmi_peer_cfr_capture_cmd.  The CFR capture is communicated
-     * through HTT_T2H_MSG_TYPE_CFR_DUMP_COMPL_IND.
+     * of type wmi_peer_cfr_capture_cmd.
+     *
+     * On targets that do not use the direct DMA framework,
+     * completion of the CFR capture is communicated through
+     * HTT_T2H_MSG_TYPE_CFR_DUMP_COMPL_IND.
+     * Such targets will set WMI_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_1
+     * in WMI Service Ready.
+     *
+     * On targets that use direct DMA, completion of CFR capture is
+     * communicated through WMI_PDEV_DMA_RING_BUF_RELEASE_EVENTID
+     * using module ID WMI_DMA_RING_CONFIG_MODULE_RTT.
+     * Such targets will set WMI_SERVICE_CFR_CAPTURE_IND_EVT_TYPE_1
+     * in WMI Service Ready and enumerate WMI_DMA_RING_CONFIG_MODULE_RTT
+     * in the dma_ring_caps entry of WMI_SERVICE_READY_EXT_EVENTID.
+     * Additional MAC metadata is provided in WMI_PEER_CFR_CAPTURE_EVENTID.
      */
     WMI_PEER_CFR_CAPTURE_CMDID,
 
@@ -1406,6 +1419,8 @@ typedef enum {
     /** report the current tx PN for the peer */
     WMI_PEER_TX_PN_RESPONSE_EVENTID,
 
+    WMI_PEER_CFR_CAPTURE_EVENTID,
+
     /* beacon/mgmt specific events */
     /** RX management frame. the entire frame is carried along with the event.  */
     WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
@@ -4202,6 +4217,9 @@ typedef struct {
             ((int8_t) (WMI_F_MS((hdr)->rssi_chain##c,                       \
               WMI_UNIFIED_RSSI_CHAN_##ch)))
 
+#define WMI_UNIFIED_CHAIN_RSSI_GET(tlv, chain_idx, band) \
+    ((A_INT8) WMI_F_MS((tlv)->chain_rssi[chain_idx], WMI_UNIFIED_RSSI_CHAN_ ## band))
+
 typedef struct {
     /** Phy error event header */
     wmi_single_phyerr_rx_hdr hdr;
@@ -24308,7 +24326,8 @@ typedef struct {
 } wmi_twt_resume_dialog_complete_event_fixed_param;
 
 typedef enum {
-     WMI_DMA_RING_CONFIG_MODULE_SPECTRAL,
+    WMI_DMA_RING_CONFIG_MODULE_SPECTRAL,
+    WMI_DMA_RING_CONFIG_MODULE_RTT,
 } WMI_DMA_RING_SUPPORTED_MODULE;
 
 typedef struct {
@@ -24413,8 +24432,8 @@ typedef struct {
      */
     A_UINT32 paddr_lo;
     /**
-     * Bits 15:0:   address of data [47:32]
-     * Bits 31:16:  reserved
+     * Bits 11:0:   address of data [43:32]
+     * Bits 31:12:  host context data [19:0]
      */
     A_UINT32 paddr_hi;
 } wmi_dma_buf_release_entry;
@@ -25888,6 +25907,72 @@ typedef struct {
   #define WMI_HECAP_MAC_HTVHTTRIGRX_SET WMI_HECAP_MAC_HTVHTTRIGRX_SET_D2
 #endif /* SUPPORT_11AX_D3 */
 
+typedef struct {
+    /** TLV tag and len; tag equals
+    * WMITLV_TAG_STRUC_wmi_cfr_capture_event_fixed_param */
+    A_UINT32 tlv_header;
+    /* Method used to capture CFR - of type WMI_PEER_CFR_CAPTURE_METHOD */
+    A_UINT32 capture_method;
+    /* VDEV identifier */
+    A_UINT32 vdev_id;
+    /* Peer MAC address. In AP mode, this is the address of the connected peer
+     * for which CFR capture is needed. In case of STA mode, this is the address
+     * of the AP to which the STA is connected
+     */
+    wmi_mac_addr mac_addr;
+    /* primary 20 MHz channel frequency in mhz */
+    A_UINT32 chan_mhz;
+    /* BW of measurement - of type WMI_PEER_CFR_CAPTURE_BW */
+    A_UINT32 bandwidth;
+    /* phy mode WLAN_PHY_MODE of the channel defined in wlan_defs.h*/
+    A_UINT32 phy_mode;
+    /* Center frequency 1 in MHz*/
+    A_UINT32 band_center_freq1;
+    /* Center frequency 2 in MHz - valid only for 11acvht 80plus80 mode*/
+    A_UINT32 band_center_freq2;
+    /* Number of spatial streams */
+    A_UINT32 sts_count;
+    /* Bits 31:0:   address of data from wmi_dma_buf_release_entry [31:0] */
+    A_UINT32 correlation_info_1;
+    /* Bits 11:0:   address of data from wmi_dma_buf_release_entry [43:32]
+     * Bits 15:12:  reserved (set to 0x0)
+     * Bits 31:16:  hardware PPDU ID [15:0]
+     */
+    A_UINT32 correlation_info_2;
+    /* Bits 1:0:    TX status (if any); values defined in enum
+    *               WMI_FRAME_TX_STATUS
+     * Bits 30:2:   reserved (set to 0x0)
+     * Bit  31:     Status of the CFR capture of the peer
+     *              1 (True) - Successful; 0 (False) - Not successful
+     */
+    A_UINT32 status;
+    /* Timestamp in microseconds at which the CFR was captured in the hardware.
+     * The clock used for this timestamp is private to the target and
+     * is not visible to the host i.e., Host can interpret only the
+     * relative timestamp deltas from one message to the next,
+     * but can't interpret the absolute timestamp from a single message.
+     */
+    A_UINT32 timestamp_us;
+    /*
+     * Count of the current CFR capture from FW.
+     * This is helpful to identify any drops in FW.
+     */
+    A_UINT32 counter;
+    /* Per chain RSSI of the peer, for up to WMI_MAX_CHAINS.
+     * Each chain's entry reports the RSSI for different bands in dBm units.
+     * Use WMI_UNIFIED_CHAIN_RSSI_GET to extract the value for a particular
+     * band.
+     * A band value of 0x80 (-128) is invalid.
+     */
+    A_UINT32 chain_rssi[WMI_MAX_CHAINS];
+} wmi_peer_cfr_capture_event_fixed_param;
+
+#define WMI_PEER_CFR_CAPTURE_EVT_STATUS_OK      0x80000000
+#define WMI_PEER_CFR_CAPTURE_EVT_STATUS_OK_S    31
+
+#define WMI_PEER_CFR_CAPTURE_EVT_STATUS_TX      0x00000003
+#define WMI_PEER_CFR_CAPTURE_EVT_STATUS_TX_S    0
+
 
 
 /* ADD NEW DEFS HERE */

fw/wmi_version.h

@@ -36,7 +36,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 632
+#define __WMI_REVISION_ 633
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work